Picons

P

patn

Vu+ Newbie
Hi.can't get picons to work on my duo 2 whit the newest image, can some one help me ?
i use 0.8 w thor and 4.8 e astra


Patn
 
G

Gaston64

Vu+ Newbie
I also have problems getting picons to work (on any sat) on 2.1.0. But this is on a completely new Duo2 just flashed with 2.1.0 so it might be due to other issues.

Picon files on a mounted USB in my case, but installing new picons via the feed puts them in /usr/share/enigma2. Don't know if this is standard or due to something in picons not quite working for me.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
Gaston64 said:
I also have problems getting picons to work (on any sat) on 2.1.0. But this is on a completely new Duo2 just flashed with 2.1.0 so it might be due to other issues.

Picon files on a mounted USB in my case, but installing new picons via the feed puts them in /usr/share/enigma2. Don't know if this is standard or due to something in picons not quite working for me.
Click to expand...

BH feeds (Green -> Yellow -> BH addons Manager -> Picons) places Picons into /media/usb/picons.
 
G

Gaston64

Vu+ Newbie
Yeah, perhaps it was only the lcdpicons that were placed in /usr/... after download

I have the files on USB (/media/usb/picon and /media/usb/piconlcd) but they aren't shown. Neither in UI nor in Duo2's lcd...

USB mount is OK, lcd background on lcd is shown just fine.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
Gaston64 said:
Yeah, perhaps it was only the lcdpicons that were placed in /usr/... after download

I have the files on USB (/media/usb/picon and /media/usb/piconlcd) but they aren't shown. Neither in UI nor in Duo2's lcd...

USB mount is OK, lcd background on lcd is shown just fine.
Click to expand...

LCDPicons is another story and it's natural position is into /usr folder (I don't remember the full path).
You can change it with a symbolic link and move the original folder to /media/usb
 
G

Gaston64

Vu+ Newbie
Cause of piconproblem for me was that blackhole wants "/media/usb/picons", I had "/media/usb/picon" without the "s". Thanks for the help!

Now on to lack of lcdpicon(s) :)
 
jwlalek

jwlalek

Vu+ User
The path for picons in the LCD4Linux has to be: /media/usb/picon. The LCD4linux has to be enabled and LCD 1 Type has to be: Internal Vu+ Duo2 LCD 400x240 (depends on picon type).
If the path is /media/usb/picons, that's why you may have a problem with displaying picons in the channel list.
 
P

patn

Vu+ Newbie
Hey. I've had the display on the tuner to work but what I wonder is it possible to get logo in the channel list when you are inside it? something like this i have found
The only picons that appear in any channel list are the standard size picons from info bar ....these appear in coolman TVGuide if you have this installed.where can i find it

Patn :)
 
mysat-bs

mysat-bs

Vu+ User
My Duo2 runs BH 2.10.0. I have no problem showing Picons on coolman TV Guide, no problem showing on LCD4linux. Therefore, I think the picon issues more like a picon location path and/or size issue. You do need to set your LCD4linux for correct picon path. I knew the above posts have offered the solution, I think the best way is using the default path, which makes much easier.
 
mysat-bs

mysat-bs

Vu+ User
patn said:
ok where do i find coolman TV Guide ? and how too install it ?

Patn :)
Click to expand...

The Cool TV Guide written by Coolman can be installed by the following steps,( press the buttons on your remotorControl unit RCU).

Menu-Addons-AddonDownloadManager-BlackHole Addons Pluggins. The lastest version is V7.0.0. After installed, it needs to be configured from the configure-interface which can be accessed by press the green button on RCU, then select the CoolTVGuide configure interface.
 
You must log in or register to reply here.
Top