Ev0
Admin
I am unable to check as I have already activated and deactivated it on my box.
LCD4LINUX Solo4K
- Thread starter Matrix10
- Start date
WebMan
Vu+ User
Sono pronto a ritentare.
Premessa:
Non ho mai avuto i precedenti problemi con il firmare su nessuno dei due Solo4k.
Non ho problemi fare aggiornamenti on-line, mi parte il decoder normale.
Cosa faccio ?
Disinstallo LCD4Linux 4.6R4 installata dal server ?
Ieri ho fatto:
Installazione LCD4Linux
Riavvio
Installazione FIX da ultimi 10 upload
Riavvio
Modificato il file per accedere a Webif di LCD4Linux
Salvato il file.
Copiato il nuovo (Qurllo di EVO)
Adesso ho schermo NERO.... non si vede nulla quand'è accesso...
Premessa:
Non ho mai avuto i precedenti problemi con il firmare su nessuno dei due Solo4k.
Non ho problemi fare aggiornamenti on-line, mi parte il decoder normale.
Cosa faccio ?
Disinstallo LCD4Linux 4.6R4 installata dal server ?
Ieri ho fatto:
Installazione LCD4Linux
Riavvio
Installazione FIX da ultimi 10 upload
Riavvio
Modificato il file per accedere a Webif di LCD4Linux
Salvato il file.
Copiato il nuovo (Qurllo di EVO)
Adesso ho schermo NERO.... non si vede nulla quand'è accesso...
Don Andres
BH Lover
Have done following :
1. Installed LCD4linux from BH server
2. Transfered Evo's config , each in respective folders
3. Generated picon forder in media/usb and transfered my 220x132 picons there
4. Have enabled "LCD4linux " on in the settings .
4. Rebooted the reciver , picons appear on TV skin infobar , but not on the LCD display
What am I missing ... ?
Have attached screen from LCD4linux setting
1. Installed LCD4linux from BH server
2. Transfered Evo's config , each in respective folders
3. Generated picon forder in media/usb and transfered my 220x132 picons there
4. Have enabled "LCD4linux " on in the settings .
4. Rebooted the reciver , picons appear on TV skin infobar , but not on the LCD display
What am I missing ... ?
Have attached screen from LCD4linux setting
Attachments
Ev0
Admin
You could try pressing menu and then load default config, but other than this I really don't know, I am no expert with lcd4linux, I just know after playing about with the settings it does work (but I have disabled it on my box as I don't need it).
pinkfl
Vu+ Newbie
Hi What's the path background folder? In etc/enigma2 ?
Hi there. Have mixed some of the files from the previous posts (thanks lads) - it works like a charm. But... there is one thing that bothers me - backlight of the LCD at night. It's so bright that I don't need a torch 
Is there any way to turn it off? I saw some options in LCD4Linux settings but wasn't able to get them to work.
Is there any way to turn it off? I saw some options in LCD4Linux settings but wasn't able to get them to work.
xrobertas
Vu+ Newbie
Hi there. Have mixed some of the files from the previous posts (thanks lads) - it works like a charm. But... there is one thing that bothers me - backlight of the LCD at night. It's so bright that I don't need a torch
Go to: Main menu / Setting / System / Display setting
That was so... obvious
thanks Xrobertas, now I've got everything set up the way I wanted
AlexWilMac
Moderator
I set L4L under BH 3.0.2 installed in Openmultiboot (in flash there is OBH 0.6) and I see every sections correctly set up either by OpenWebIf or by L4L plugin (and I see the results as I want on both of them), but there is no way to switch on the LCD on Solo4K.
I suspect it depends on the fact BH it is installed in multiboot and some paths are not correctly redirected by OMB itself.
Obviously, the three parameters to switch on the 3 sections are ON and I also tried the procedure of switching them ON/OFF more times and then reboot.
What am I doing wrong?
I suspect it depends on the fact BH it is installed in multiboot and some paths are not correctly redirected by OMB itself.
Obviously, the three parameters to switch on the 3 sections are ON and I also tried the procedure of switching them ON/OFF more times and then reboot.
What am I doing wrong?
nunigaia
Moderator
You may check the mounts ( usb device or hdd device ).
Probably if you have the path as, per example:
/media/usb/picon
you must set, when you are using OpenMultiboot:
/omb/picon
after set path, reboot your STB.
Note: If your LCD is not on ... Check the first field in Lcd4Linux plugin ( plugins browser ) and change it from <NO> to <YES> to turn it ON and reboot your STB.
Hope it helps.
best regards
nunigaia
AlexWilMac
Moderator
I tried your suggestion although I suspected that, as I don't see anything and not only picons, it wouldn't help.
As I wrote, L4L is enabled and I can see all my settings perfectly in plugin and in OpenWebIf.
It just does not switch on.
As I wrote, L4L is enabled and I can see all my settings perfectly in plugin and in OpenWebIf.
It just does not switch on.
AlexWilMac
Moderator
UPDATE:
I decided to swap roles of images and installing the current BH backup in flash and use OBH with OMB.
So to see if L4L worked in flash but nothing changed.
I attach my L4L configuration file in case anyone would help.
I decided to swap roles of images and installing the current BH backup in flash and use OBH with OMB.
So to see if L4L worked in flash but nothing changed.
I attach my L4L configuration file in case anyone would help.
AlexWilMac
Moderator
After a complete reinstall (again under OpenMultiBoot) there is nothing on LCD of Solo4K but it's perfect on BH screen. I attach the log in case someone would like to have a look at it.