Duo2 LCD4Linux lcd display layouts

simon123

Vu+ User
hi again iv found a file u did for me in post 335 it works ok is there a way to stop it going from side to side ie shuter tv kind regards simon 123
 

simon123

Vu+ User
hi again iv found a file u did for me in post 335 it works ok is there a way to stop it going from side to side ie shuter tv kind regards simon 123
 

Vytenis P.

Vu+ User
I'm using the latest open black hole 0.6 image
Then go to menu Setup > System > Front display panel > Settings and select
"Brightness (Normal)" - brightness in working state (changes you will see immediately)
"Brightness (Standby) - brightness in standby mode (make it darker, because it's seen at night)
I think you understand, that it is not a color LCD, but 140x32 dots b/w VFD
 

Vytenis P.

Vu+ User
Here's mine. Started as Ev0's template but has been heavily modified. Drop Backgrounds folder into /media/usb/
It's good. But your background is named (bg_11.jpg) the same, like a frequently used other background, which is in Ev0's template too.
A better idea, I thing is to give the other name and choose desired one by changing it's name in LCD4linux config ;)
 

simon123

Vu+ User
Regarding LCD4Linux ... StutterTV dosent start up when I switch the box back on in the morning I have to switch the duo2 bacg on again from the back switch then shiter tc comes back on again strange can I do any thing to sort this out kind regards simon123
 

DOUGALMCD

Vu+ Newbie
Trying to comprehend what you are asking but the channel that you have set to start up will only be available when the box is switched on from socket or switch not from standby as the channel you last viewed will still be on view.
 

Vytenis P.

Vu+ User
I'll try to teach you how to do it yourself. Open your favorite Internet browser and write your STB's IP address in address field. After pressing Enter, OpenWebif will open. Select LCD4Linux Setup. Will open new window with a tab General and Element "other". Select LCD1 Type Internal Vu+ Duo2 LCD 400x240, other (LCD2, 3) select 'off'. Push 'set settings' on the bottom. Then go to Element "Screen" and select Active Screen > Screen 1 and Screens used for Changing select Screen 1 too (if you need one screen all the time). Push 'set settings' on the bottom. Than select Modus 'On' on above. If you need only a Clock and nothing more, as you wrote, look all bolded and coloured entries in the 'Element' part to switch any screen to off except the Clock. When selected Clock, select Screen 1, LCD1, type select 'Time', size select 90-120, regardless font type, you'll select on the bottom line. 'Position' about 50 (digits to be in center), 'Aligning' Center, 'Color' select by your taste. The result you'll see on the top immediately. After you'll be glad with your clock view, push 'set settings' on the bottom. After it you can "copy to Media" and "copy to Idle" to make your work faster. But anyhow you must go to Modus Media and Idle to ensure, that all other Element switched off, except 'Clock' (on Iddle Element 'LCD Display' Screens used for Changing select Screen 1. That's all if I did not miss anything ;)
 

saeed.agha

Vu+ Newbie
Hi to all
please help me . from yesterday LCD in duo2 only shows white screen and no clock , picture , programs and .... . I only can increase and decrease the brightness from 0 to 10 .
I clean flashed it but nothing changed .
the picture attached . you can see it .
please help me .
 

Attachments

  • 20160724140.jpg
    20160724140.jpg
    212.1 KB · Views: 129
Top