Black Hole 3.0.6 Vu+ Ultimo4K

complexity

Vu+ Newbie
In
BlackHole-3.0.6-vuultimo4k_usb_release_20181003_578734e\vuplus\ultimo4k\rootfs\etc\tuxbox
the satellites.xml has now +4.9 degrees. Why???
Everywhere else Astra 4A is referenced under +4.8 degrees. Do i have just edit these digits, or there are other settings?
 

Matrix10

Administrator
Yes, i have the same motor. It works good for other satellites.
The problem is that all my settings were previously for ASstra 4A at +4.8 degrees.
Now in the tuner configuration i have this satellite under +4.9 degrees. I think, this is incorrect.
How to properly restore this satellite? How to change the degrees or else?

From your writing, it's not clear what kind of Satellite List you are using.
Your list or you scanned the satellite.

It is evident that there is a difference in the motor configuration and the list you are using.

You can try to fix the problem with manual scanning the satellite.
 

roddiss

BH Lover
I dont think so.
There was another sound glitch when watching satellite channels (SD or HD). It is evident when you set the video output as 2K. At some time the sound starts mute itself periodically for 0.5 seconds every 15 seconds or so. Once it starts, it continues on all channels until shutdown. I look only 1 channel on universal LNB and do not do other things, so it is simple single-process watching TV.
I think that this receiver is not powerful enough for 4K.
Or the firmware is buggy. This was on 3.0.5, this continues on 3.0.6.

Workaround: switch to Full HD (1080P). This is shame to downscale the signal between 4K receiver and 4K TV!

I have only noticed it playing files from Mediaplayer, sound glitch, just half a second or so once in a while. Also often when I press ok to play a file in Mediaplayer sound does not come and I have to start it again, then sound comes. I dont use 4k yet, waiting on a Sony tv to drop in price :)
 

any

Vu+ Newbie
do not fix with the sony TVs a vote were sony tv now the lg Korean and samsung penzo that have passed in quality do not wait for them to fall in price so when you fall in price there will be others of higher quality anyway by a friend of mine who was in korea and told me that they are developing 8k televisions and so will come off the 4k price sharply
 

complexity

Vu+ Newbie
From your writing, it's not clear what kind of Satellite List you are using.
Your list or you scanned the satellite.

It is evident that there is a difference in the motor configuration and the list you are using.

You can try to fix the problem with manual scanning the satellite.
I was on Blackhole 3.0.5. I have made a backup. Then i have flashed the receiver with Blackhole 3.0.6. At the end of flash the box asked me if i want to restore settings. I said YES.
That is how i got here. I think, that satellites.xml came with the blackhole 3.0.6 image.
If i edit this file in /etc/tuxbox, and replace 4.9 with 4.8, it restores the reception. I had to re-add the changed satellite to the tuner.

Another question is that flashing kills *****.....
 

zidane

Vu+ Newbie
selam arkadaşlar blackhole 3.0.6 ip tv vod filmleri ileri geri sarma nasıl eklenır
yardımcı olurmusunuz kumandadan 1-4-7 tuşları geri 3-6-9 tuşları ileri sarma olayı
bu imajda yok mesela blackhole 3.0.5 de var 3.0.6 da yok. bu eklentiyi burada verırmısnız saygılar
 

zidane

Vu+ Newbie
merhaba arkadaşlar blackhole 3.0.6 ip tv vod filmleri nasıl geri ve ileri geri sarmak
Etkinliği geri sarmak için 1-4-7 tuşlarını 3-6-9 tuşlarına geri döndürmek istermisiniz
karadelik 3.0.5'te böyle bir görüntü yoktur. 3.0.6 yoktur. Bu eklentiyi burada veririm.
 

zidane

Vu+ Newbie
hi friends help blackhole 3.0.6 ip tv vod movies how to rewind back and forth
Do you want to command 1-4-7 keys back to 3-6-9 keys to rewind event
there is no such image in blackhole 3.0.5 there is no 3.0.6. I would give you this plug-in here
 

nunigaia

Moderator
I was on Blackhole 3.0.5. I have made a backup. Then i have flashed the receiver with Blackhole 3.0.6. At the end of flash the box asked me if i want to restore settings. I said YES.
That is how i got here. I think, that satellites.xml came with the blackhole 3.0.6 image.
If i edit this file in /etc/tuxbox, and replace 4.9 with 4.8, it restores the reception. I had to re-add the changed satellite to the tuner.

Another question is that flashing kills *****.....

*** WARNING ***

Please, pay attention to §4. of our board rules. --> http://www.vuplus-community.net/rules.html

It´s forbidden to talk about illegal stuff.

best regards
nunigaia
 

nunigaia

Moderator
selam arkadaşlar blackhole 3.0.6 ip tv vod filmleri ileri geri sarma nasıl eklenır
yardımcı olurmusunuz kumandadan 1-4-7 tuşları geri 3-6-9 tuşları ileri sarma olayı
bu imajda yok mesela blackhole 3.0.5 de var 3.0.6 da yok. bu eklentiyi burada verırmısnız saygılar
merhaba arkadaşlar blackhole 3.0.6 ip tv vod filmleri nasıl geri ve ileri geri sarmak
Etkinliği geri sarmak için 1-4-7 tuşlarını 3-6-9 tuşlarına geri döndürmek istermisiniz
karadelik 3.0.5'te böyle bir görüntü yoktur. 3.0.6 yoktur. Bu eklentiyi burada veririm.

Here, is the international section so, please next time write only in English language and don´t duplicate posts.

best regards
nunigaia
 

mosad

BH Lover
@Ev0 @Matrix10

The last image of blackhole 3.0.6 is really fast & good but there is a little problem with 4K movies is not working in hdd


e9b2fcbc0b6cc6d6f1f29684f8ae726d.jpg


80f3aa7d969949c6708e29f7a7b58be5.jpg


c42b9fa8405f18e60c165504cf4c1d4a.jpg


50d5d82000d8316f38fd089942b8fd8f.jpg



The same 4K movies it’s working OBH



6bc1c35537706c465c8ddc52ff651fe3.jpg


ab1944aa7b76b691c16989fad4dbac99.jpg


23d386870a342af8a672d87403d728a9.jpg





Sent from my iPhone using Tapatalk
 

Ev0

Admin
Blackhole is not the best image for media playback, it is restricted by what codec's vu+ support in there git.

Blackhole is good for just watching satellite tv.

If you want the best media playback, then you are better off using the OBH image (that is why we created it).

There are 2 images for a reason, we didn't do it just because we could.

If both images did exactly the same thing, then we would only need 1 image.
 

Mick12334

Moderator
Please don't post email addresses, on the open forum.
If you wish to talk in private then use the "Start a Conversation" option, just click on the users name and select the option.
 

nunigaia

Moderator
Give me u email

*** warning ***

I would like too recommend you for, remove your signature.
You can apply another, regarding the system you have, for example:

  • TV set
  • STB´s
  • LNB´s
  • Dish or Dishs
  • Your system in general.
This kind of information is more usefull for us, in order to help you, than a social network.

best regards
nunigaia
 

AlexWilMac

Moderator
Do you really think there is such a "minor" issue? Don't you think it must be something related to your box?
And what does it mean that does not work the Starting GUI? You can't see the screen? The STB does not start at all? What?
Please, explain.
 
Top