satellite / tuner setup

2style

Vu+ Newbie
Hello,

I just received my VU+ Solo with Enigma 2 image.

I have problem for configuring the satellite setup.

My dish is using 3 LNB for Hotbird 13, Amos 2/3 and EutelSat.

I received all the channel from Hotbird, but nothing from Amos or EutelSat.

I have configured my Tuner with DiSeqC A/B/C/D

When I make a (manual) scan,

(I select "type of scan=single satellite", and I select "satellite = Amos 2/3")

after 3 minutes of scanning no service is added.

With my previous demodulator, I was receiving these Amos channels.

Could I get any help ? I don't know at all how to setup/configure Tuner and make the scan...

Thanks very much for any help
Patrick
 

Mito

Administrator
Hello,

I just received my VU+ Solo with Enigma 2 image.

I have problem for configuring the satellite setup.

My dish is using 3 LNB for Hotbird 13, Amos 2/3 and EutelSat.

I received all the channel from Hotbird, but nothing from Amos or EutelSat.

I have configured my Tuner with DiSeqC A/B/C/D

When I make a (manual) scan,

(I select "type of scan=single satellite", and I select "satellite = Amos 2/3")

after 3 minutes of scanning no service is added.

With my previous demodulator, I was receiving these Amos channels.

Could I get any help ? I don't know at all how to setup/configure Tuner and make the scan...

Thanks very much for any help
Patrick
Maybe there is a mistake into ports configuration.
You should have something like to the attached screenshot.
 

Attachments

  • screenshot.jpg
    screenshot.jpg
    35 KB · Views: 777

2style

Vu+ Newbie
Thanks very much Mito for your reply, it is working perfectly now
smile.gif
 
hello every body
I have a Vu+ duo and one motorized Dish with 1 LNB, I have one Cabele connected to tuner a and Iwant to use that for my both tuners, and wach one channel when I record another Movie on different transponder and same SAT , I config tuner B, equal to tuner A or I tryed other opthins, but it doesnt work ...
Please help me, how can I do this ?
 

Mito

Administrator
hello every body
I have a Vu+ duo and one motorized Dish with 1 LNB, I have one Cabele connected to tuner a and Iwant to use that for my both tuners, and wach one channel when I record another Movie on different transponder and same SAT , I config tuner B, equal to tuner A or I tryed other opthins, but it doesnt work ...
Please help me, how can I do this ?
If you have only one LNB, you can't see at the same time two channel from two different transponders.

In any case, you have to configure your Tuner B as loopthrough to Tuner A not equal to Tuner A.
 

cozma75

Vu+ Newbie
But if you use 7 LNB how to make configure. I configure my dish with 7 LNB but I received chanel from only 4 satellites. The satellites are : sirius5 ,hotbird 13, eutelsat 16, thor 0.9, astra 19, amos 4.0, eutelsat 7.0, Could you help me to configure corectly in the meniu? thank you
 

Mito

Administrator
But if you use 7 LNB how to make configure. I configure my dish with 7 LNB but I received chanel from only 4 satellites. The satellites are : sirius5 ,hotbird 13, eutelsat 16, thor 0.9, astra 19, amos 4.0, eutelsat 7.0, Could you help me to configure corectly in the meniu? thank you
Sorry, really I don't know ho to setup the tuner for a switch DISEqC 8/1.
As far I know, you can configure only switch DISEqC 2/1 or 4/1.

Anyway, if you use a Vu+Duo, I think the easiest way to solve your issue is to use two switch 4/1.
You may connect 4 LNB to the first switch DISEqC and the other three LNB to the second switch DISEqC, then you may connect the first switch to the Tuner A and the second switch to the Tuner B.
 

adetec

Vu+ Newbie
I have set the image up with the *****,but nothing is showing.I was getting channels before.but the bloke who set the system up for me is away.please just let me know how to link back to his server.thanks
 

Matrix10

Administrator
But if you use 7 LNB how to make configure. I configure my dish with 7 LNB but I received chanel from only 4 satellites. The satellites are : sirius5 ,hotbird 13, eutelsat 16, thor 0.9, astra 19, amos 4.0, eutelsat 7.0, Could you help me to configure corectly in the meniu? thank you

I do not know precisely to tell you because i use a motor
but to config 7 LNBs you have to use advanced mode in reception/tuner settings
separately for each LNB.

I'm sure that on the net (use google search) you can find information for 8 LNB
which is the same configuration for 7 LNB
 

Zupy

Vu+ User+++
But if you use 7 LNB how to make configure. I configure my dish with 7 LNB but I received chanel from only 4 satellites. The satellites are : sirius5 ,hotbird 13, eutelsat 16, thor 0.9, astra 19, amos 4.0, eutelsat 7.0, Could you help me to configure corectly in the meniu? thank you
What dieseqc do you use?
here is few ways depends of type of switch that you use

version 1 - this is more frequently used

lnb1----->diseqc1.1------>AA Uncommited input 1
lnb2----->diseqc1.1------>AB Uncommited input 1
lnb3----->diseqc1.1------>BA Uncommited input 1
lnb4----->diseqc1.1------>BB Uncommited input 1

lnb5----->diseqc1.1------>AA Uncommited input 2
lnb6----->diseqc1.1------>AB Uncommited input 2
lnb7----->diseqc1.1------>BA Uncommited input 2
lnb8----->diseqc1.1------>BB Uncommited input 2

Here is example screenshot of this adjustment in vu
1302891241.jpg


1302890671.jpg


1302891748.jpg


1302890725.jpg


Option 2

lnb1----->Uncommited input 1
lnb2----->Uncommited input 2
lnb3----->Uncommited input 3
lnb4----->Uncommited input 4
lnb5----->Uncommited input 5
lnb6----->Uncommited input 6
lnb7----->Uncommited input 7
lnb8----->Uncommited input 8

example for this
1302890868.jpg


1302890905.jpg

etc....
 

yashar1357

Vu+ Newbie
Hi friends
Possible to get different outs for different inputs? I means for example component for input A and HDMI fort input B. Could this be done by image developing?
 

giamburrasca

Vu+ Newbie
What dieseqc do you use?
here is few ways depends of type of switch that you use

version 1 - this is more frequently used

lnb1----->diseqc1.1------>AA Uncommited input 1
lnb2----->diseqc1.1------>AB Uncommited input 1
lnb3----->diseqc1.1------>BA Uncommited input 1
lnb4----->diseqc1.1------>BB Uncommited input 1

lnb5----->diseqc1.1------>AA Uncommited input 2
lnb6----->diseqc1.1------>AB Uncommited input 2
lnb7----->diseqc1.1------>BA Uncommited input 2
lnb8----->diseqc1.1------>BB Uncommited input 2


Option 2

lnb1----->Uncommited input 1
lnb2----->Uncommited input 2
lnb3----->Uncommited input 3
lnb4----->Uncommited input 4
lnb5----->Uncommited input 5
lnb6----->Uncommited input 6
lnb7----->Uncommited input 7
lnb8----->Uncommited input 8

hello, I have vu+ solo (BH 1.6.6). I tried both ways on diseqC 8x1 with 1.1 protocol but nothing happens, my vu solo only receives the signal from LNB 1. Should I change "command order" from uncommited to commited? Or what else can I change in tuner setup to make it work properly with 1.1?
 

giamburrasca

Vu+ Newbie
What type of diseqc switch do you use??
I just noted that for OPTION 2 there's no need to enter AA, AB, BC etc for "Commited DiseqC command", there should be "None". Hence, I mistakenly entered AA, AB for OPTION 2. Later I'll be home and try OPTION 2 without entering AA, AB... Hope it will solve my problem
 
Top