C band lnb tuner configuration

[amila perera]

How to configure tuner for this c band lnb

 

[Matrix10]

I do not believe that Lnb uses DISEqC.

It switches From Vertical to Horizontal depending on LNB voltage.

So config Is probably simple

Voltage mode Polarisation, The rest is all No.
Of course I'm not sure because I do not have such an LNB
That's just the assumption.

 

[amila perera]

I do not believe that Lnb uses DISEqC.

It switches From Vertical to Horizontal depending on LNB voltage.

So config Is probably simple

Voltage mode Polarisation, The rest is all No.
Of course I'm not sure because I do not have such an LNB
That's just the assumption.

I connected this lnb to 8×1 diseqc switch then does above is correct

 

[Matrix10]

I connected this lnb to 8×1 diseqc switch then does above is correct

Of course then you need a DISqC commands for switch.

 

[amila perera]

Of course then you need a DISqC commands for switch.

I need to know whether configuration posted above correct

 

[el bandido]

What is the make and model of the 8X1 switch?

The C band lnb shown in the picture is a band stacked lnb. It does not use voltage to switch between horizontal and vertical transponders. You will most likely need to use two l.o. frequencies (5150/5750 MHz).
Google search "band stacked c band" or band stacked lnb for more information.

 

[amila perera]

What is the make and model of the 8X1 switch?

The C band lnb shown in the picture is a band stacked lnb. It does not use voltage to switch between horizontal and vertical transponders. You will most likely need to use two l.o. frequencies (5150/5750 MHz).
Google search "band stacked c band" or band stacked lnb for more information.

Emp centurie

DiSEqC switch S8/1PCP-W2

How to assign LOF in advance configuration

 

[amila perera]

Will this configuration work

 

[amila perera]

Specification table

 

[el bandido]

You cannot use 11700 for the threshold because 11700 is ku band.
I have a different brand of a bandstacked c band lnb, but it is not mounted to any dish and has sat on the shelf for several years.

I suggest getting a regular 5150 lnb and forget about using this one unless you want to experiment. It was my plan at one time to add this type of lnb to the blindscan plugin, but I do not know when or IF I will be able to do that.

 

[amila perera]

You cannot use 11700 for the threshold because 11700 is ku band.
I have a different brand of a bandstacked c band lnb, but it is not mounted to any dish and has sat on the shelf for several years.

I suggest getting a regular 5150 lnb and forget about using this one unless you want to experiment. It was my plan at one time to add this type of lnb to the blindscan plugin, but I do not know when or IF I will be able to do that.

Could I use threshold value of 1500 MHz. Since vertical if is starts from 1550 MHz

 

[amila perera]

more specs for lnb

 

[el bandido]

I think the threshold will be where the 22Kh tone comes on to switch l.o. frequencies. So a 1500 threshold will not help. It will be best to use another c band lnb besides this one, or create two satellite entries for each satellite and have one for the 5150 l.o. and another for the 5750 l.o.