Realtek rtl8812au driver for new Vu+ kernel

YinYang

Vu+ Newbie
Hello everybody

I have a Gigablue WLAN Stick-600-Mbit Dual-Band USB Adapter For my Solo2 bought (rtl8812au). Unfortunately I do not get him to run! Can someone help me? I use VTI Image 11. Lg YY Sorry for my bad English
 

Brouzdal

Vu+ Newbie
Hello.
Please help with the TP-LINK Archer T4U AC 1300 ver.2 FCC ID TE7T4UV2 wifi adapter on the Vu + Solo2 BH 3.0.3.L receiver
Once connected to the usb port, it is not detected (the diode is off and the wireless LAN setting is not visible). I checked the driver (rtl8812au) over the TS Panel and it is installed. I also tried installing rtl8812au_git-r0-bh0_vusolo2.ipk manually from the first tune of this thread, but I still can not get the device up and running.
Thank you for your advice and apologize, please, my bad English ....
 

eda

Vu+ Newbie
Driver version rtl8812au v4.2.2_7502.20130517
Is it time to upgrade?
Assemble the driver on v5.2.9_22809.20170621
I'll be very grateful.
On v4.2.2 a very slow copy speed on ftp
 

Attachments

  • rtl8812AU_linux_v5.2.9_22809.20170621.tar.gz
    2.7 MB · Views: 223

Almagest

Vu+ Newbie
Why image doesn't work with USB Wi-Fi D-Link DWA-125 rev A2?
It also doesn't work with USB Wi-Fi TP-Link 321G
How I can fix it?

I install rt3070_2.5.0.3-r4-bh0_vuuno.ipk but it still doesnt work on me uno 4k
 

Marin Posavec

Vu+ Newbie
I have bought Meross WiFi USB adapter which I want to use on BlackHole 3.0.4 on Vu Zero. Card is not recognized automatically, and WiFi is not working.
On Windows is recognized as: Realtek RTL8811AU Wireless LAN USB
Here is also link for my adapter, where linux drivers can be downloaded: http://www.meross.com/products/usb_adapters/2.html
When I check over telnet on my Vu Zero, I get following:
root@vuzero:~# lsusb
Bus 001 Device 004: ID 0bda:a811
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001

My WiFi USB adapter is -> Bus 001 Device 004: ID 0bda:a811

Do we need add some entry (this ID from above... or something) in to the IPK for RTL8811AU for Blackhole on Vu Zero?

Thank you for quick help / support.
 

bugima

Vu+ Newbie
Hi, i hope anyone can help me.
I have until now used a Sweex Wireless 54G Adapter on my vu+duo. Its been ok, but i am now thinking of streaming from the box to a tv and i assume this is a bottleneck.

So today i bought a TP-Link AC450 Wireless Nano UDB Adapter. I plugged it in and hoped for the best. Unfortunately, the box did not like it and could not detect it. It came with some error message that no module something could not be found.
So, do i need to install a new driver? Is the driver available in the BH image somewhere, so that i just need to activate it or does it not exist and or can someone help me out?
 

Hknc

Vu+ Newbie
I have bought Meross WiFi USB adapter which I want to use on BlackHole 3.0.4 on Vu Zero. Card is not recognized automatically, and WiFi is not working.
On Windows is recognized as: Realtek RTL8811AU Wireless LAN USB
Here is also link for my adapter, where linux drivers can be downloaded: http://www.meross.com/products/usb_adapters/2.html
When I check over telnet on my Vu Zero, I get following:
root@vuzero:~# lsusb
Bus 001 Device 004: ID 0bda:a811
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001

My WiFi USB adapter is -> Bus 001 Device 004: ID 0bda:a811

Do we need add some entry (this ID from above... or something) in to the IPK for RTL8811AU for Blackhole on Vu Zero?

Thank you for quick help / support.

I join, I also have some RTL8811AU. (ID 0bda:a811)
with the speed of these little ones we would have good connection.
Driver 8812 is compatible with these because of what I have seen in some pages.
Could someone compile the 8812 for these?

Greetings.
 

arnfs78

Vu+ Newbie
Hi. I need driver rtl8812bu to my vu+ zero 4k (blackhole). Can anyone please help me? Thanks in advance
 

arnfs78

Vu+ Newbie
It's included into all BH images.

Hi angelofsky1980.
Thanks for your answer. But i have a wireless adapter with rtl8812au chipset, and it does not work in my vu+ zero 4k. In another forum someone told me that the problem has to be with the vu+ zero 4k kernel. Can you please help?
Best regards
 

angelofsky1980

BlackHole Driver Specialist
Hi angelofsky1980.
Thanks for your answer. But i have a wireless adapter with rtl8812au chipset, and it does not work in my vu+ zero 4k. In another forum someone told me that the problem has to be with the vu+ zero 4k kernel. Can you please help?
Best regards
Probably your device is not listed into driver sources.

Post here model, brand and hardware revision of your wireless device please and we'll investigate.
 

arnfs78

Vu+ Newbie
Probably your device is not listed into driver sources.

Post here model, brand and hardware revision of your wireless device please and we'll investigate.

Hi angelofsky1980.
I bought the wireless adapter in aliexpress. Here is the device:
Code:
https://www.aliexpress.com/item/USB3-0-AC-1200Mbps-Wireless-Dual-Band-USB-Adapter-Wireless-Network-WiFi-Adapter-2-4-5/32842909137.html?spm=a2g0s.9042311.0.0.4bf64c4dleBuQK

I can´t find the data you asked me to, but i did find this info in the device:
Realtek 8812AU wireless lan 802.11ac usb nic
Controller version: 1030.23.502.2017

I hope this info is usefull.
Best regards
 
Last edited by a moderator:

angelofsky1980

BlackHole Driver Specialist
Hi angelofsky1980.
I bought the wireless adapter in aliexpress. Here is the device:
Code:
https://www.aliexpress.com/item/USB3-0-AC-1200Mbps-Wireless-Dual-Band-USB-Adapter-Wireless-Network-WiFi-Adapter-2-4-5/32842909137.html?spm=a2g0s.9042311.0.0.4bf64c4dleBuQK

I can´t find the data you asked me to, but i did find this info in the device:
Realtek 8812AU wireless lan 802.11ac usb nic
Controller version: 1030.23.502.2017

I hope this info is usefull.
Best regards
Unfortuantely these info are not useful to identify the USB IDs used by your device.
 

arnfs78

Vu+ Newbie
Unfortuantely these info are not useful to identify the USB IDs used by your device.

Hi angelofsky1980.
How can i get more info? The wireless device doesn´t work in vu+ zero4k, but it works in windows pc.
Is there any way to find the info that you need?
I´m newbie, so i don´t know what to do more.
Thank you for all your help.
 
Top