Black Hole Vu+ Duo 1.3.9.2 (update)

[Zupy]

Ok Foreman here is what could solve your problem and what causes problem.
Problem is in combination a downloading a lott of epg and using a sub player - box overload ram and it is needed to make swap.
Make at least 128mb swap on hdd (beter then usb because of bad usb drivers) and then try using sub player you will see that there is no crash any more.

Here is situation with memory right after crossepg update

After restart situation is better but swap is still in use
Ram 97%
Swap 1%

 

[pawel_nl]

Thanx !!! Great job !

 

[Foreman]

Ok Foreman here is what could solve your problem and what causes problem.
Problem is in combination a downloading a lott of epg and using a sub player - box overload ram and it is needed to make swap.
Make at least 128mb swap on hdd (beter then usb because of bad usb drivers) and then try using sub player you will see that there is no crash any more.

Here is situation with memory right after crossepg update

After restart situation is better but swap is still in use
Ram 97%
Swap 1%

Thanks very muuuuuch zupy for your help and answer.I'll test it.

 

[Foreman]

Hi Zupy.I tested it,work without a problem.Thanks very much.

 

[Foreman]

Hello Mr Army. Thanks for every thing. It seems that in Black Hole E2 Script ( in Army_Pure_HD skin) should be repair.

 

[Jotne]

Why does this image not list what version it is under about screen?
It does list Black Hole, but should also list 1.3.9.2, or at least 1.3.9

 

[Dutchsat]

I have problems with the sub-channel on Sky Germany. Normally i can select this with the ok button and then select these channels with the green button, ie on Sky Select, but i only get the black hole Green Panel with this option. How can I select these sub-channels?

 

[Matrix10]

Long press >> green button

 

[Matrix10]

Why does this image not list what version it is under about screen?
It does list Black Hole, but should also list 1.3.9.2, or at least 1.3.9

Because the skins can be used in other versions and not only in 1.3.9

 

[Jotne]

So it is not possible to see what version I am running.
Other image do display version information in the About screen.
You see that if I use other skin, this page will change?

 

[Matrix10]

So it is not possible to see what version I am running.
Other image do display version information in the About screen.
You see that if I use other skin, this page will change?

For now It is not possible
because the skins are coded for more versions of the image.
Otherwise we would have for each version of the image the new version of the skin.
But it is possible that we change this in any of the following images and skin modifications.
On the other hand I think it's important to know the CVS version on which the image is based
Everyone knows what version BH image they have installed .

 

[unisat]

Hi,

BH 1392 ,Meoboot and OpenPLi-2.0

Am very fond of openpli images. The most recent release " OpenPLi-2.0-beta-vuduo-

20101207.nfi " works fine with Meoboot. It installs and boots well. All encrypted SD channels

can be zapped. However, when it comes to zapping Encrypted HD channels it fails. I either

get "service not found" or a "tuner failure" message. When I go to satpostioner I find that the

HD chnnel has a 90%SNR but NOT LOCKED.

My setup is as follows:

BH 1392 in flash

VTI 2.2+ VIX 1.3 in usb . All working fine including clearing of encrypted HD.

Only Openpli in usb is not clearing Encrypted HD channels. What is so strange is that all

other encrypted sd channels can be cleared.

Note : " OpenPLi-2.0-beta-vuduo-20101207.nfi " works fine with Barryallen. It installs and

boots and zaps enceypted HD channels without any problem.

Can anyone please help with this problem

TIA

 

[Past2Present]

The problem with openpli in meoboot is that they still using the old drivers, so you have to wait until they will implent the new drivers into the new openpli2.

 

[eysibey]

yeni ımage ne zaman gelmek beklıyor biz

 

[Likvid]

For now It is not possible
because the skins are coded for more versions of the image.
Otherwise we would have for each version of the image the new version of the skin.
But it is possible that we change this in any of the following images and skin modifications.
On the other hand I think it's important to know the CVS version on which the image is based
Everyone knows what version BH image they have installed .

There are problems with your own default skin as well.

If i load the Satellite Equipment plugin the values and text come together when i load the plugin.

 

[Likvid]

Hi,

BH 1392 ,Meoboot and OpenPLi-2.0

Am very fond of openpli images. The most recent release " OpenPLi-2.0-beta-vuduo-

20101207.nfi " works fine with Meoboot. It installs and boots well. All encrypted SD channels

can be zapped. However, when it comes to zapping Encrypted HD channels it fails. I either

get "service not found" or a "tuner failure" message. When I go to satpostioner I find that the

HD chnnel has a 90%SNR but NOT LOCKED.

My setup is as follows:

BH 1392 in flash

VTI 2.2+ VIX 1.3 in usb . All working fine including clearing of encrypted HD.

Only Openpli in usb is not clearing Encrypted HD channels. What is so strange is that all

other encrypted sd channels can be cleared.

Note : " OpenPLi-2.0-beta-vuduo-20101207.nfi " works fine with Barryallen. It installs and

boots and zaps enceypted HD channels without any problem.

Can anyone please help with this problem

TIA

OpenPLI is old driver and old OE, Blackhole is so much more versatile than PLI.

 

[Matrix10]

There are problems with your own default skin as well.

If i load the Satellite Equipment plugin the values and text come together when i load the plugin.

Default skin is not my
but regardless
It can not be a skin and image problem
because there is no coding for Satellite Equipment plugin in skin and image coding.
The problem is coding inside Satellite Equipment plugin .
Of course it is possible to correct this coding
but I do not intend to make a correction to the plugins Coding.
This is job for plugins authors.