Black Hole Vu+ Uno 2.1.5

angelofsky1980

angelofsky1980

BlackHole Driver Specialist
erkkisdt said:
I found some delta that might have something to do with USB DVB-T not working.
On BH 2.1.0 I get
root@vuuno:~# dmesg | grep dvb
dvb_bcm7413: module license 'Proprietary' taints kernel.
dvb-usb: found a 'Artec T14 - USB2.0 DVB-T' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
usbcore: registered new interface driver dvb_usb_dibusb_mc
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
dvb-usb: found a 'Artec T14 - USB2.0 DVB-T' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Artec T14 - USB2.0 DVB-T successfully initialized and connected.​
but on BH 2.1.5 I get
root@vuuno:~# dmesg | grep dvb
dvb_bcm7413: module license 'Proprietary' taints kernel.
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
c327bff41e580916e7d0af2cf412d419a8bc21cb rename dvb_usb_v2 related functions
e0d2c74dd664342588c5af3bdee78040f9f8e6db dvb_usbv2: rename function to bh_*
c327bff41e580916e7d0af2cf412d419a8bc21cb rename dvb_usb_v2 related functions
e0d2c74dd664342588c5af3bdee78040f9f8e6db dvb_usbv2: rename function to bh_*
dvb-usb: found a 'Artec T14 - USB2.0 DVB-T' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
usbcore: registered new interface driver dvb_usb_dibusb_mc
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
dvb-usb: found a 'Artec T14 - USB2.0 DVB-T' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
epc : e12f4428 usb_urb_exit+0x768/0xf0 [dvb_usb]
ra : e12f4430 usb_urb_exit+0x770/0xf0 [dvb_usb]
Modules linked in: ext2 dvb_usb_dibusb_mc(O) dvb_usb_dibusb_common(O) dib3000mc(O) dibx000_common(O) dvb_usb(O) bh_dvb_core(O) bh_rc_core(O) fpga_directc(PO) brcmfb(O) dvb_bcm7413(PO) procmk(O) ipv6
[<e1314770>] dibusb_dib3000mc_frontend_attach+0x64/0x1c0 [dvb_usb_dibusb_common]
[<e12f2198>] dvb_usb_adapter_frontend_init+0xe0/0x1cc [dvb_usb]
[<e12f0000>] dvb_usb_get_hexline+0x0/0x12c [dvb_usb]
[<e12f0d18>] dvb_usb_device_init+0x594/0x87c [dvb_usb]
[<e131d034>] dibusb_mc_probe+0x34/0x40 [dvb_usb_dibusb_mc]​
Also for lsmod there are some deltas. On BH 2.1.0 there are lines that are missing on BH 2.1.5
fuse 75068 0
mt2060 4022 1​

What else could I check for find a solution?

Erkki
Click to expand...
We are working on it.
 
Z

zohalstar62

Vu+ Newbie
already there was coherence upnp server in pseed up panel and we can stream vu dvb on windows phone mobile but in new version i cant see this.it was the only way to stream dvb on windows phone mobile.
 
le palmier

le palmier

Vu+ Newbie
Thanks a lot
there are no problems with the image but with servers, the epg isn't working properly.
the skin is fairly new and some plugins can't integrate into it
Vu+ is lucky because you're here
 
B

b1gz

Vu+ Newbie
yes there seems to be a problem with the epg, i got the rytec epg fix from the other thread it worked fine but when i restarted my box, the epg displays only current and next event. when i check the database info it says last update is on the 22nd i just downloaded this morning
 
nunigaia

nunigaia

Moderator
nademallail said:
thank you BlackHole team .
how i can change blue screen to red color ?
Click to expand...

On your remote control press:

<MENU> <ADDONS> <ADDONS DOWNLOAD MANAGER> <BLACKHOLE IMAGE BOOTLOGO> ---> scroll down until you found this bootlogo: Milkark Bootlogos BH01 Red, download and install, restart enigma2.

best regards
nunigaia
 
nademallail

nademallail

Vu+ Newbie
nunigaia said:
On your remote control press:

<MENU> <ADDONS> <ADDONS DOWNLOAD MANAGER> <BLACKHOLE IMAGE BOOTLOGO> ---> scroll down until you found this bootlogo: Milkark Bootlogos BH01 Red, download and install, restart enigma2.

best regards
nunigaia
Click to expand...
Thanks so much you teaching me something can not understand for a long time
 
Y

Yany

Vu+ Newbie
Hi guys. Today I updated BH from 2.09 to 2.1.5 and rescanned satellites. Now I have strange behaviour from dreamboxedit, when I zap to channels I get error message - "zap command failed" (in the log: "The ZAP command did not receive the normal 0 returncode from the Dreambox."). Channel is switched at the end, but with delay of few seconds. Tested also dreamset with same result. Do you experience same behaviour? Channels which I have in my bouquets are working without this error, those only in satellites list suffer with this problem.
 
Last edited:
J

javierc

Vu+ Newbie
Hi, thanks for the new version, I have updated from 2.0.9 version and now I have problems with tdt tuner. When I have one channel for several minutos or a few hours the screen go to black and I see in a few seconds a message error. Then the only solution is restart my Vu plus Uno.

The message error is in spanish:

Mensaje (4)
¡No hay datos en el transpondedor!
(Tiempo cumplido leyendo el PAT)
Click to expand...

I think in english the message can be similar to this:

Message (4)
No data on the transponder!
(Time up reading PAT)
Click to expand...

The USB tuner is AvermMedia AVerTV Volar Green HD and the vu plus recognize like A835 (DVB-T) model.

Can anyone tell me what is the problem and how to solve it?

Regards
 
X

xaphs

Vu+ Newbie
Nice interface BUT...
1. cant choose the ***** that is installed
2. "My tube player" doesnt show the text that is written when shearching
3. YouTube application is very slow for VU+ UNO

Hope you fix these bugs, at least the first two...
Thanks
 
X

xaphs

Vu+ Newbie
Nice interface BUT...
1. cant choose the c c c a m that is installed
2. "My tube player" doesnt show the text that is written when shearching
3. YouTube application is very slow for VU+ UNO

Hope you fix these bugs, at least the first two...
Thanks
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
xaphs said:
Nice interface BUT...
1. cant choose the c c c a m that is installed
2. "My tube player" doesnt show the text that is written when shearching
3. YouTube application is very slow for VU+ UNO

Hope you fix these bugs, at least the first two...
Thanks
Click to expand...
Already banned ....
 
You must log in or register to reply here.
Top