Drivres rtl8192eu
- Thread starter smfb
- Start date
angelofsky1980
BlackHole Driver Specialist
Hello friends,will any way by working Realtek chipsets 8192eu in vu+ solo SE ???
Does not recognize USB - Adapter
thanks
Post some details about your dongle please.
Hello angelofsky1980 I leave here the specifications of my USB WiFi Wireless Adapter.
I have solo SE
Firmware blackhole 2.1.4
bulld 2014-12-05
dvb drivers 20141205
kernel version 3.13.5
Features:
1. 802.11n/g/b 300M Wireless WiFi USB 2.0 Adapter (RTL8192 Chipset).
2. Complies with IEEE 802.11 b/g/n standards
3. Packed with the 5db external antenna
4. High-speed data transfer rate - up to 300Mbps
5. Supports WPS technology (WiFi Protected Setup),
6. Supports 64/128-bit WEP Encryption WPA, WPA-PSK, WPA2-PSK, TKIP/AES, high level Data Security.
7. Provides USB 2.0/1.1 high speed interface.
8. Supports USB 1.0, 1.1 2.0, 3.0 interface
9. Supports Windows 2000, XP 32/64-bit, Vista 32/64-bit, Linux, MAC OS x
Specification:
StandardsIEEE 802.11N，IEEE802.11G，IEEE802.11B
Wireless Signal Rates
With Automatic Fallback11n: Up to 300Mbps(Dynamic)
11g: Up to 54Mbps(Dynamic)
11b: Up to 11Mbps(Dynamic)
Frequency Range2.4-2.4835GHz
Wireless Transmit Power18dBm(EIRP)
Modulation TypeDBPSK,DQPSK,CCK,OFDM
Receiver Sensitivity270M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
Work ModeAd-Hoc Infrastructure,softAP
Wireless SecurityWPS，64/128 bit WEP
WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES)
Support Operating SystemWindows XP/Vista/ Win7/Mac/Win8
InterfaceUSB2.0 Hi-Speed connector
Operating Temperature0℃-40℃(32℉-104℉)
Storage Temperature-40℃-70℃(-40℉-158℉)
Relative Humidity10% - 90%, non condensation
Storage Humidity5%-95% non-condensing
Storage Humidity5%-95% non-condensing
ChipRTL8192
Gross Weight63g
Size10cm(L) x 20cm(W) x 1cm(H)
thanks for trying to help
I have solo SE
Firmware blackhole 2.1.4
bulld 2014-12-05
dvb drivers 20141205
kernel version 3.13.5
Features:
1. 802.11n/g/b 300M Wireless WiFi USB 2.0 Adapter (RTL8192 Chipset).
2. Complies with IEEE 802.11 b/g/n standards
3. Packed with the 5db external antenna
4. High-speed data transfer rate - up to 300Mbps
5. Supports WPS technology (WiFi Protected Setup),
6. Supports 64/128-bit WEP Encryption WPA, WPA-PSK, WPA2-PSK, TKIP/AES, high level Data Security.
7. Provides USB 2.0/1.1 high speed interface.
8. Supports USB 1.0, 1.1 2.0, 3.0 interface
9. Supports Windows 2000, XP 32/64-bit, Vista 32/64-bit, Linux, MAC OS x
Specification:
StandardsIEEE 802.11N，IEEE802.11G，IEEE802.11B
Wireless Signal Rates
With Automatic Fallback11n: Up to 300Mbps(Dynamic)
11g: Up to 54Mbps(Dynamic)
11b: Up to 11Mbps(Dynamic)
Frequency Range2.4-2.4835GHz
Wireless Transmit Power18dBm(EIRP)
Modulation TypeDBPSK,DQPSK,CCK,OFDM
Receiver Sensitivity270M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
Work ModeAd-Hoc Infrastructure,softAP
Wireless SecurityWPS，64/128 bit WEP
WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES)
Support Operating SystemWindows XP/Vista/ Win7/Mac/Win8
InterfaceUSB2.0 Hi-Speed connector
Operating Temperature0℃-40℃(32℉-104℉)
Storage Temperature-40℃-70℃(-40℉-158℉)
Relative Humidity10% - 90%, non condensation
Storage Humidity5%-95% non-condensing
Storage Humidity5%-95% non-condensing
ChipRTL8192
Gross Weight63g
Size10cm(L) x 20cm(W) x 1cm(H)
thanks for trying to help
Hello angelofsky1980 I leave here the specifications of my USB WiFi Wireless Adapter.
I have solo SE
Firmware blackhole 2.1.4
bulld 2014-12-05
dvb drivers 20141205
kernel version 3.13.5
Features:
1. 802.11n/g/b 300M Wireless WiFi USB 2.0 Adapter (RTL8192 Chipset).
2. Complies with IEEE 802.11 b/g/n standards
3. Packed with the 5db external antenna
4. High-speed data transfer rate - up to 300Mbps
5. Supports WPS technology (WiFi Protected Setup),
6. Supports 64/128-bit WEP Encryption WPA, WPA-PSK, WPA2-PSK, TKIP/AES, high level Data Security.
7. Provides USB 2.0/1.1 high speed interface.
8. Supports USB 1.0, 1.1 2.0, 3.0 interface
9. Supports Windows 2000, XP 32/64-bit, Vista 32/64-bit, Linux, MAC OS x
Specification:
StandardsIEEE 802.11N，IEEE802.11G，IEEE802.11B
Wireless Signal Rates
With Automatic Fallback11n: Up to 300Mbps(Dynamic)
11g: Up to 54Mbps(Dynamic)
11b: Up to 11Mbps(Dynamic)
Frequency Range2.4-2.4835GHz
Wireless Transmit Power18dBm(EIRP)
Modulation TypeDBPSK,DQPSK,CCK,OFDM
Receiver Sensitivity270M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
Work ModeAd-Hoc Infrastructure,softAP
Wireless SecurityWPS，64/128 bit WEP
WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES)
Support Operating SystemWindows XP/Vista/ Win7/Mac/Win8
InterfaceUSB2.0 Hi-Speed connector
Operating Temperature0℃-40℃(32℉-104℉)
Storage Temperature-40℃-70℃(-40℉-158℉)
Relative Humidity10% - 90%, non condensation
Storage Humidity5%-95% non-condensing
Storage Humidity5%-95% non-condensing
ChipRTL8192
Gross Weight63g
Size10cm(L) x 20cm(W) x 1cm(H)
thanks for trying to help
hello , thanks for the file but I need help where I put it ? if you can help me thank you
angelofsky1980
BlackHole Driver Specialist
It's not a driver but a debug file for me.
Any news on a driver for rtl8192eu I ordered rtl8192cu and rtl8192eu came instead. I can send it back but a quick fix is easier if available?
angelofsky1980
BlackHole Driver Specialist
I can work on drivers only during weekend when I don't work ... so probably during this weekend I can work on the driver.
hi
bumping this thread.
There are linux sources for 8192EU, rtl8192EU_linux_v4.3.1.1, at
and
.
As far as I understand, the sources are exactly the same, the only difference is in VID/PID list in os_dep\linux\usb_intf.c (the maxxter package contains much more vid/pid pairs, however, I'm interested personally in d-link pair 2001/3319).
Unfortunately, I do not have enough skills to compile this driver myself (for Solo and Solo2 platforms).
Could you please point me in the right direction? I was able to compile the entire openvuplus-2.1 image from code.vuplus.org , but I have no idea how to add existing driver sources to the tree...
bumping this thread.
There are linux sources for 8192EU, rtl8192EU_linux_v4.3.1.1, at
Code:
http://ftp//files.dlink.com.au/products/DWA-131/REV_E/Drivers/DWA-131_Linux_driver_v4.3.1.1.zip
Code:
http://www.maxxter.biz/repository/8280/ACT-WNP-UA-005_driver_21E19A96-EC89-4C1B-A697-C4354BC21454.rarAs far as I understand, the sources are exactly the same, the only difference is in VID/PID list in os_dep\linux\usb_intf.c (the maxxter package contains much more vid/pid pairs, however, I'm interested personally in d-link pair 2001/3319).
Unfortunately, I do not have enough skills to compile this driver myself (for Solo and Solo2 platforms).
Could you please point me in the right direction? I was able to compile the entire openvuplus-2.1 image from code.vuplus.org , but I have no idea how to add existing driver sources to the tree...
Last edited by a moderator:
hallo
I've managed to compile the driver myself finally. Attached are the patches for 20140812_rtl8192EU_linux_v4.3.1.1_11320.tar.gz
Since my goal was to get it running on solo2 VTI 8.x image, I had to add compile flags CONFIG_NF_CONNTRACK and CONFIG_BRIDGE_NETFILTER, otherwise the driver caused kernel panic because of sk_buff structure layout mismatch on VTI image. Not sure that placing these flags in Makefile is the right way, but it does the job
So, now DLINK 131 rev E1A (VID:2001 PID:3319, RTL8192EU) works great on my solo2.
I'm also attaching the ipk - again, it confirmed working only on solo2, VTI 8.1 image, I did not tried it on any other images/platforms.
Hope this helps.
I've managed to compile the driver myself finally. Attached are the patches for 20140812_rtl8192EU_linux_v4.3.1.1_11320.tar.gz
Since my goal was to get it running on solo2 VTI 8.x image, I had to add compile flags CONFIG_NF_CONNTRACK and CONFIG_BRIDGE_NETFILTER, otherwise the driver caused kernel panic because of sk_buff structure layout mismatch on VTI image. Not sure that placing these flags in Makefile is the right way, but it does the job
So, now DLINK 131 rev E1A (VID:2001 PID:3319, RTL8192EU) works great on my solo2.
I'm also attaching the ipk - again, it confirmed working only on solo2, VTI 8.1 image, I did not tried it on any other images/platforms.
Hope this helps.
angelofsky1980
BlackHole Driver Specialist
In this Board there is only support for Vu+ boxes. Ask directly OpenATV members to help you.
angelofsky1980
BlackHole Driver Specialist
Every box needs it's dedicated IPK.
sashires
Vu+ Newbie
Thanks for the quick reply, can you advise the best way forward
Could you make an IPK file for "vu+ duo" for the rtl8192eu please? it would help sooo mutch!