DVB-T August T202 V2.0 on a Vu + Solo4K with black Hole 3.0.9C. It does not appear in the list of tu

Jina

Vu+ Newbie
VU+ Solo4K BH 3.0.9C & DVB-T August T202 V2.0 usb stick ID .

lsusb -v & dmesg commands:

Code:
Bus 004 Device 002: ID 048d:9006
Bus 005 Device 002: ID 148f:5372
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002
Bus 007 Device 001: ID 1d6b:0001
Bus 008 Device 001: ID 1d6b:0001
Bus 009 Device 001: ID 1d6b:0001
Bus 010 Device 001: ID 1d6b:0001

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.28-1.8 (jenkins_wheezy@ns3121835) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Apr 24 12:25:35 UTC 2019
[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: BCM97366SFF_bad_MoCA
[    0.000000] moving dtb from 0x000000000761c000 to 0x000000000081d994
[    0.000000] bmem: Reserved 633 MiB at 0x0000000018300000
[    0.000000] bmem: Reserved 499 MiB at 0x00000000a0d00000
[    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 524288
[    0.000000] free_area_init_node: node 0, pgdat c07e3440, node_mem_map cd7f2000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000]   HighMem zone: 5632 pages used for memmap
[    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
[    0.000000] MCP: Write pairing already disabled
[    0.000000] PERCPU: Embedded 8 pages/cpu @cd7c2000 s8768 r8192 d15808 u32768
[    0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait rw rootflags=data=journal debug coherent_pool=2M bmem=633m@387m bmem=499m@2573m
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 892332K/2097152K available (5718K kernel code, 263K rwdata, 1860K rodata, 244K init, 182K bss, 1188436K reserved, 16384K cma-reserved, 671744K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc076eb0c   (7579 kB)
[    0.000000]       .init : 0xc076f000 - 0xc07ac240   ( 245 kB)
[    0.000000]       .data : 0xc07ae000 - 0xc07eff28   ( 264 kB)
[    0.000000]        .bss : 0xc07eff30 - 0xc081d994   ( 183 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 95)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc441000, parent irq: 74)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 97)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 57)
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
[    0.000008] Switching to timer-based delay loop
[    0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
[    0.000252] pid_max: default: 32768 minimum: 301
[    0.000358] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000364] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.006085] CPU: Testing write buffer coherency: ok
[    0.006296] CPU0: update cpu_power 1024
[    0.006303] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.006354] Setting up static identity map for 0x571428 - 0x571480
[    0.009162] CPU1: Booted secondary processor
[    0.009187] CPU1: update cpu_power 1024
[    0.009190] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.009271] Brought up 2 CPUs
[    0.009284] SMP: Total of 2 processors activated.
[    0.009289] CPU: All CPU(s) started in SVC mode.
[    0.009696] devtmpfs: initialized
[    0.013592] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[    0.014620] regulator-dummy: no parameters
[    0.014821] NET: Registered protocol family 16
[    0.017286] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.017964] cpuidle: using governor ladder
[    0.017970] cpuidle: using governor menu
[    0.019935] irq: no irq domain found for /rdb/interrupt-controller@f040a580 !
[    0.020131] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
[    0.023538] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040452f] registered
[    0.023705] syscon f0442400.syscon: regmap [mem 0xf0442400-0xf04427ff] registered
[    0.023858] syscon f0462000.syscon: regmap [mem 0xf0462000-0xf04620ff] registered
[    0.024023] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf0404157] registered
[    0.024173] syscon f0404158.syscon: regmap [mem 0xf0404158-0xf040418f] registered
[    0.024334] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070f] registered
[    0.024490] syscon f0410710.syscon: regmap [mem 0xf0410710-0xf0410717] registered
[    0.024649] syscon f0501004.syscon: regmap [mem 0xf0501004-0xf0501403] registered
[    0.024800] syscon f0901004.syscon: regmap [mem 0xf0901004-0xf0901403] registered
[    0.024940] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
[    0.025093] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
[    0.025232] syscon f0440154.syscon: regmap [mem 0xf0440154-0xf0440157] registered
[    0.025372] syscon f0440354.syscon: regmap [mem 0xf0440354-0xf0440357] registered
[    0.025513] syscon f0440400.syscon: regmap [mem 0xf0440400-0xf0440403] registered
[    0.026017] No ATAGs?
[    0.026036] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.026042] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.126583] brcm-pci f0470000.pcie: link down
[    0.140126] bio: create slab <bio-0> at 0
[    0.140918] SCSI subsystem initialized
[    0.141147] libata version 3.00 loaded.
[    0.141582] usbcore: registered new interface driver usbfs
[    0.141668] usbcore: registered new interface driver hub
[    0.141769] usbcore: registered new device driver usb
[    0.142026] pps_core: LinuxPPS API ver. 1 registered
[    0.142031] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.142094] PTP clock support registered
[    0.142717] Advanced Linux Sound Architecture Driver Initialized.
[    0.143566] cfg80211: Calling CRDA to update world regulatory domain
[    0.143960] Switched to clocksource arch_sys_counter
[    0.144173] FS-Cache: Loaded
[    0.145930] thermal thermal_zone0: failed to read out thermal zone 0
[    0.146019] NET: Registered protocol family 2
[    0.146437] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.146454] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.146479] TCP: Hash tables configured (established 2048 bind 2048)
[    0.146561] TCP: reno registered
[    0.146569] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.146583] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.146707] NET: Registered protocol family 1
[    0.146911] RPC: Registered named UNIX socket transport module.
[    0.146916] RPC: Registered udp transport module.
[    0.146919] RPC: Registered tcp transport module.
[    0.146923] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.146931] PCI: CLS 0 bytes, default 64
[    0.147197] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[    0.148373] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.149165] bounce pool size: 64 pages
[    0.149591] Registering unionfs 2.5.13 (for 3.14.0-rc7)
[    0.149822] NFS: Registering the id_resolver key type
[    0.149855] Key type id_resolver registered
[    0.149859] Key type id_legacy registered
[    0.149870] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.149876] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.150310] msgmni has been set to 462
[    0.151101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.151109] io scheduler noop registered
[    0.151114] io scheduler deadline registered
[    0.151134] io scheduler cfq registered (default)
[    0.151381] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 259, 260
[    0.152026] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.153508] f040b000.serial: ttyS0 at MMIO 0xf040b000 (irq = 108, base_baud = 5062500) is a 16550A
[    0.945480] console [ttyS0] enabled
[    0.949514] f040b040.serial: ttyS1 at MMIO 0xf040b040 (irq = 109, base_baud = 5062500) is a 16550A
[    0.958869] f040b080.serial: ttyS2 at MMIO 0xf040b080 (irq = 110, base_baud = 5062500) is a 16550A
[    0.971401] loop: module loaded
[    0.975250] ahci strict-ahci.0: can't get clock
[    0.979909] ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
[    1.003985] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.012532] ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part
[    1.022305] scsi0 : ahci_platform
[    1.026012] scsi1 : ahci_platform
[    1.029577] ata1: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x100 irq 72
[    1.037518] ata2: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x180 irq 72
[    1.046978] spi_brcmstb f0443400.spi: 1-lane output, 3-byte address
[    1.053381] spi_brcmstb f0443400.spi: master is unqueued, this is deprecated
[    1.060708] m25p80 spi32766.0: found mx25l3255e, expected m25p80
[    1.066738] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
[    1.071992] 5 ofpart partitions found on MTD device spi32766.0
[    1.077837] Creating 5 MTD partitions on "spi32766.0":
[    1.082983] 0x000000000000-0x000000200000 : "flash0.bolt"
[    1.089181] 0x000000200000-0x000000210000 : "flash0.macadr"
[    1.095471] 0x000000210000-0x000000220000 : "flash0.nvram"
[    1.101621] 0x000000220000-0x000000230000 : "flash0.devtree"
[    1.108023] 0x000000000000-0x000000400000 : "flash0"
[    1.114818] libphy: Fixed MDIO Bus: probed
[    1.119592] bcmgenet f0b60000.ethernet: GENET 4.3 EPHY: 0x1002
[    1.133967] libphy: bcmgenet MII bus: probed
[    1.156294] bcmgenet f0b60000.ethernet: configuring instance for internal PHY
[    1.164574] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.170413] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.294784] xhci-brcm: xHCI BRCM driver
[    1.298754] xhci-brcm f0481000.xhci: xHCI Host Controller
[    1.304359] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus number 1
[    1.312270] xhci-brcm f0481000.xhci: irq 116, io mem 0xf0481000
[    1.318850] hub 1-0:1.0: USB hub found
[    1.322628] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.329913] xhci-brcm f0481000.xhci: xHCI Host Controller
[    1.335493] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus number 2
[    1.343601] hub 2-0:1.0: USB hub found
[    1.347382] hub 2-0:1.0: 2 ports detected
[    1.351696] ehci-brcm: EHCI BRCM driver
[    1.355716] ehci-brcm f0480300.ehci: EHCI Host Controller
[    1.361303] ehci-brcm f0480300.ehci: new USB bus registered, assigned bus number 3
[    1.379044] ehci-brcm f0480300.ehci: irq 112, io mem 0xf0480300
[    1.393977] ata1: SATA link down (SStatus 0 SControl 300)
[    1.403973] ehci-brcm f0480300.ehci: USB 2.0 started, EHCI 1.00
[    1.410443] hub 3-0:1.0: USB hub found
[    1.414271] hub 3-0:1.0: 1 port detected
[    1.418440] ehci-brcm f0480500.ehci: EHCI Host Controller
[    1.424060] ehci-brcm f0480500.ehci: new USB bus registered, assigned bus number 4
[    1.441777] ehci-brcm f0480500.ehci: irq 113, io mem 0xf0480500
[    1.463971] ehci-brcm f0480500.ehci: USB 2.0 started, EHCI 1.00
[    1.470417] hub 4-0:1.0: USB hub found
[    1.474200] hub 4-0:1.0: 1 port detected
[    1.478357] ehci-brcm f0490300.ehci: EHCI Host Controller
[    1.483928] ehci-brcm f0490300.ehci: new USB bus registered, assigned bus number 5
[    1.501637] ehci-brcm f0490300.ehci: irq 118, io mem 0xf0490300
[    1.523964] ehci-brcm f0490300.ehci: USB 2.0 started, EHCI 1.00
[    1.530397] hub 5-0:1.0: USB hub found
[    1.534180] hub 5-0:1.0: 1 port detected
[    1.538325] ehci-brcm f0490500.ehci: EHCI Host Controller
[    1.543886] ehci-brcm f0490500.ehci: new USB bus registered, assigned bus number 6
[    1.561600] ehci-brcm f0490500.ehci: irq 119, io mem 0xf0490500
[    1.583965] ehci-brcm f0490500.ehci: USB 2.0 started, EHCI 1.00
[    1.590503] hub 6-0:1.0: USB hub found
[    1.594284] hub 6-0:1.0: 1 port detected
[    1.598447] ohci-brcm: OHCI BRCM driver
[    1.602461] ohci-brcm f0480400.ohci: BRCM OHCI controller
[    1.608045] ohci-brcm f0480400.ohci: new USB bus registered, assigned bus number 7
[    1.615673] ohci-brcm f0480400.ohci: irq 114, io mem 0xf0480400
[    1.678525] hub 7-0:1.0: USB hub found
[    1.682297] hub 7-0:1.0: 1 port detected
[    1.686455] ohci-brcm f0480600.ohci: BRCM OHCI controller
[    1.692016] ohci-brcm f0480600.ohci: new USB bus registered, assigned bus number 8
[    1.699650] ohci-brcm f0480600.ohci: irq 115, io mem 0xf0480600
[    1.763976] ata2: SATA link down (SStatus 0 SControl 300)
[    1.768565] hub 8-0:1.0: USB hub found
[    1.768585] hub 8-0:1.0: 1 port detected
[    1.768843] ohci-brcm f0490400.ohci: BRCM OHCI controller
[    1.769027] ohci-brcm f0490400.ohci: new USB bus registered, assigned bus number 9
[    1.769070] ohci-brcm f0490400.ohci: irq 120, io mem 0xf0490400
[    1.813988] usb 4-1: new high-speed USB device number 2 using ehci-brcm
[    1.828546] hub 9-0:1.0: USB hub found
[    1.832317] hub 9-0:1.0: 1 port detected
[    1.836480] ohci-brcm f0490600.ohci: BRCM OHCI controller
[    1.842068] ohci-brcm f0490600.ohci: new USB bus registered, assigned bus number 10
[    1.849784] ohci-brcm f0490600.ohci: irq 121, io mem 0xf0490600
[    1.918451] hub 10-0:1.0: USB hub found
[    1.922313] hub 10-0:1.0: 1 port detected
[    1.926572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.933114] ehci-pci: EHCI PCI platform driver
[    1.937712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.943910] ohci-pci: OHCI PCI platform driver
[    1.948710] usbcore: registered new interface driver usb-storage
[    1.954908] mousedev: PS/2 mouse device common for all mice
[    1.960952] i2c /dev entries driver
[    1.964757] Success! Registering the characther device  success with 0
[    1.971516] blackhole initialised
[    1.974918] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.980895] sdhci: Secure Digital Host Controller Interface driver
[    1.987096] sdhci: Copyright(c) Pierre Ossman
[    1.991457] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.998265] mmc0: no vqmmc regulator found
[    2.002369] mmc0: no vmmc regulator found
[    2.043973] mmc0: SDHCI controller on f0440000.sdhci [f0440000.sdhci] using ADMA
[    2.052446] mmc1: no vqmmc regulator found
[    2.056555] mmc1: no vmmc regulator found
[    2.106002] mmc1: SDHCI controller on f0440200.sdhci [f0440200.sdhci] using ADMA
[    2.113990] usb 5-1: new high-speed USB device number 2 using ehci-brcm
[    2.124053] input: ITE Technologies, Inc. USB Deivce as /devices/f0480500.ehci/usb4/4-1/4-1:1.1/0003:048D:9006.0001/input/input0
[    2.137870] hid-generic 0003:048D:9006.0001: input: USB HID v1.01 Keyboard [ITE Technologies, Inc. USB Deivce] on usb-f0480500.ehci-1/input1
[    2.154575] usbcore: registered new interface driver usbhid
[    2.160162] usbhid: USB HID core driver
[    2.168732] TCP: cubic registered
[    2.174081] NET: Registered protocol family 17
[    2.180874] Key type dns_resolver registered
[    2.187258] Registering SWP/SWPB emulation handler
[    2.196535] regulator-dummy: disabling
[    2.211282] ALSA device list:
[    2.214284]   No soundcards found.
[    2.217934] Waiting for root device /dev/mmcblk0p4...
[    2.447627] mmc1: BKOPS_EN bit is not set
[    2.457856] mmc1: new high speed MMC card at address 0001
[    2.463597] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
[    2.468240] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
[    2.474263] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
[    2.483635]  mmcblk0: p1 p2 p3 p4
[    2.489791]  mmcblk0boot1: unknown partition table
[    2.495611]  mmcblk0boot0: unknown partition table
[    2.544737] EXT3-fs (mmcblk0p4): error: couldn't mount because of unsupported optional features (240)
[    2.554610] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    2.597040] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
[    2.606589] EXT4-fs (mmcblk0p4): recovery complete
[    2.611811] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
[    2.620741] VFS: Mounted root (ext4 filesystem) on device 179:4.
[    2.629715] devtmpfs: mounted
[    2.632978] Freeing unused kernel memory: 244K (c076f000 - c07ac000)
[    2.880495] udevd[616]: starting version 182
[    2.995799] WARNING: You are using an experimental version of the media stack.
[    2.995799]    As the driver is backported to an older kernel, it doesn't offer
[    2.995799]    enough quality for its usage in production.
[    2.995799]    Use it with care.
[    2.995799] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[    2.995799]    b72c2640f72c92d3f8dac9b3c6e5fa4fe0b73dcc tryfix em28xx
[    2.995799]    3e6e48d66efaf3478472914018dd2109e8ee7d00 tryfix em28xx
[    2.995799]    650494dfa1ab1afeec0216a7bc76b16130f098cd tryfix em28xx
[    3.185343] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
[    3.214084] usb 5-1: reset high-speed USB device number 2 using ehci-brcm
[    3.262951] WARNING: You are using an experimental version of the media stack.
[    3.262951]    As the driver is backported to an older kernel, it doesn't offer
[    3.262951]    enough quality for its usage in production.
[    3.262951]    Use it with care.
[    3.262951] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[    3.262951]    b72c2640f72c92d3f8dac9b3c6e5fa4fe0b73dcc tryfix em28xx
[    3.262951]    3e6e48d66efaf3478472914018dd2109e8ee7d00 tryfix em28xx
[    3.262951]    650494dfa1ab1afeec0216a7bc76b16130f098cd tryfix em28xx
[    3.374896] usb 4-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[    3.380559] random: dd urandom read with 64 bits of entropy available
[    3.398235] usb 4-1: bh_dvb_usb_v2: found a 'ITE 9135(9006) Generic' in cold state
[    3.416249] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
[    3.424319] usb 4-1: bh_dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
[    3.473629] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
[    3.484385] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.492201] usbcore: registered new interface driver rt2800usb
[    3.575000] usb 4-1: dvb_usb_af9035: firmware version=3.39.1.0
[    3.580871] usb 4-1: bh_dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
[    3.591499] usb 4-1: dvb_usb_af9035: [0] overriding tuner from 00 to 60
[    3.599967] usb 4-1: bh_dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    3.610145] DVB: registering new adapter (ITE 9135(9006) Generic)
[    3.633377] i2c i2c-0: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0
[    3.640306] usb 4-1: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[    3.653863] usbcore: registered new interface driver dvb_usb_af9035
[    3.808214] procmk_init
[    3.814270] bcm_event: module license 'Proprietary' taints kernel.
[    3.820463] Disabling lock debugging due to kernel taint
[    5.762610] random: nonblocking pool is initialized
[    7.144197] DVB: registering new adapter (_vuplus_solo4k_)
[    7.634089] bcm7376: hotplug_callback():
[    7.634089] Hotplug - status.connected 1:0:1
[    7.641171] bcm7376: hotplug_callback():
[    7.641171] Hotplug - connecting HDMI to display 0xe
[    7.804290] bcm7376: hotplug_callback():
[    7.804290] Hotplug - status.connected 1:1:1
[    7.903999] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[    7.944018] [MPVR]: >> misc_pvr_init
[    7.950003] [VID]: 6bcm7335_video_init
[    8.041327] [AUD]: 6bcm7335_audio_init
[    8.045463] [AUD]: >> bcm_audio_capture_init
[    8.064015] qam=0, ofdm=0, satellite=1
[    8.068815] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.076554] qam=0, ofdm=0, satellite=1
[    8.081336] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.088982] qam=0, ofdm=0, satellite=1
[    8.094026] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.101556] qam=0, ofdm=0, satellite=1
[    8.106285] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.114035] qam=0, ofdm=0, satellite=1
[    8.118745] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.126467] qam=0, ofdm=0, satellite=1
[    8.131197] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.138830] qam=0, ofdm=0, satellite=1
[    8.144001] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.151586] qam=0, ofdm=0, satellite=1
[    8.156307] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.164047] qam=1, ofdm=0, satellite=0
[    8.167832] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.175979] qam=1, ofdm=0, satellite=0
[    8.179748] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[    8.187354] bcm7376: bcm7335_frontend_init(): vtuner1 : 11
[    8.288827] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
[    8.296743] BKNI_Malloc(linuxkernel) top users:
[    8.296743]     blocks,   bytes, filename:line
[    8.305737]       1291,  282224, BSEAV/lib/utils/balloc.c:31
[    8.374328] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[    8.394228] [LCD]: registered
[    8.944026] [CI]: registered ci0
[    8.984665] [CI]: CI interface initialised
[    8.984665]
[    9.044026] [DFP]: registered dbox fp
[    9.064435] [SC]: registered sci0
[    9.068625] [SC]: registered sci1
[   10.693969] system_time_set wakeup mode get
[   10.753967] system_time_set wakeup mode get 0xc4
[   10.922079] [VID]: VIDEO_SET_STREAMTYPE 0
[   10.926563] [VID]: VIDEO_SELECT_SOURCE 1  0
[   10.930919] [VID]: VIDEO_PLAY 1  2 0
[   10.939912] [VID]: VIDEO_CONTINUE 1  1
[   10.944107] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
[   11.220555] [VID]: VIDEO_STOP 0  1
[   11.224993] [VID]: VIDEO_SELECT_SOURCE 0  0
[   11.263976] f0b60000.etherne:01: Broadcom BCM7366 PHY revision: 0x10, patch: 2
[   13.264058] libphy: f0b60000.etherne:01 - Link is Down
[   14.788196] libphy: f0b60000.etherne:01 - Link is Up - 1000/Full
[   18.166155] NET: Registered protocol family 10
[   18.778849] [VID]: VIDEO_SET_STREAMTYPE 0
[   18.783119] [VID]: VIDEO_SELECT_SOURCE 1  0
[   18.787896] [VID]: VIDEO_PLAY 1  2 0
[   18.797310] [VID]: VIDEO_CONTINUE 1  1
[   18.801512] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
[   19.078772] [VID]: VIDEO_STOP 0  1
[   19.084538] [VID]: VIDEO_SELECT_SOURCE 0  0
[   21.187723] qam=0, ofdm=0, satellite=1
[   21.191629] qam=0, ofdm=0, satellite=1
[   21.195410] qam=0, ofdm=0, satellite=1
[   21.199171] qam=0, ofdm=0, satellite=1
[   21.202929] qam=0, ofdm=0, satellite=1
[   21.206707] qam=0, ofdm=0, satellite=1
[   21.210681] qam=0, ofdm=0, satellite=1
[   21.214512] qam=0, ofdm=0, satellite=1
[   21.218629] qam=0, ofdm=1, satellite=0
[   21.222396] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   21.230102] qam=1, ofdm=0, satellite=0
[   22.668054] qam=0, ofdm=0, satellite=1
[   22.671832] qam=0, ofdm=0, satellite=1
[   22.675798] qam=0, ofdm=0, satellite=1
[   22.679560] qam=0, ofdm=0, satellite=1
[   22.683317] qam=0, ofdm=0, satellite=1
[   22.687088] qam=0, ofdm=0, satellite=1
[   22.691000] qam=0, ofdm=0, satellite=1
[   22.694786] qam=0, ofdm=0, satellite=1
[   22.698543] qam=0, ofdm=1, satellite=0
[   22.702596] qam=0, ofdm=1, satellite=0
[   22.706384] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   28.917291] [AUD]: AUDIO_SET_MUTE 0
[   28.921680] [AUD]: AUDIO_SET_MIXER -835740024
[   28.927530] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[   28.933909] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[   28.941964] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[   29.130921] [AUD]: AUDIO_SET_MIXER -835740024
[   29.136073] [AUD]: AUDIO_SET_MIXER : amixl 57, amixr 57
[   29.142950] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[   29.151113] [AUD]: AUDIO_SET_MIXER : next left volume -4141, right volume -4141
[   30.013475] FE tune
[   30.369648] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[   30.383725] [AUD]: AUDIO_SELECT_SOURCE 0
[   30.388928] [AUD]: AUDIO_SET_BYPASS_MODE 1
[   30.394345] [AUD]: downmix 0 state : 0
[   30.399806] [AUD]: AUDIO_PAUSE 0
[   30.404315] [AUD]: AUDIO_PLAY 0 decoder start : 0
[   30.412042] [VID]: VIDEO_SELECT_SOURCE 0  0
[   30.417444] [VID]: VIDEO_SLOWMOTION 0    0
[   30.422846] [VID]: VIDEO_FAST_FORWARD 0    0 0
[   30.428677] [VID]: VIDEO_CONTINUE 0  0
[   30.433854] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcce1e600
[   30.440192] [AUD]: Mute : 0
[   30.444571] [AUD]: AUDIO_CHANNEL_SELECT 0
[   30.701787] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[   30.709621] [VID]: VIDEO_SLOWMOTION 0    1
[   30.714942] [VID]: VIDEO_FAST_FORWARD 0    1 0
[   30.721029] [VID]: VIDEO_CONTINUE 0  1
[   30.726045] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcce1e600
[   30.732287] [AUD]: Mute : 0
[  396.017315] [AUD]: AUDIO_STOP 0
[  396.028315] [AUD]: AUDIO_CONTINUE 0 0 aph=0x0
[  396.032956] [AUD]: AUDIO_CONTINUE aph=0 0 0
[  404.678965] [AUD]: AUDIO_SET_MUTE 0
[  404.794368] FE tune
[  405.137686] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[  405.150472] [AUD]: AUDIO_SELECT_SOURCE 0
[  405.155825] [AUD]: AUDIO_SET_BYPASS_MODE 1
[  405.161242] [AUD]: downmix 0 state : 0
[  405.166537] [AUD]: AUDIO_PAUSE 0
[  405.171097] [AUD]: AUDIO_PLAY 0 decoder start : 0
[  405.178236] [VID]: VIDEO_SELECT_SOURCE 0  1
[  405.182803] [VID]: VIDEO_SLOWMOTION 0    1
[  405.188364] [VID]: VIDEO_FAST_FORWARD 0    1 0
[  405.194231] [VID]: VIDEO_CONTINUE 0  1
[  405.199361] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcce1e200
[  405.205694] [AUD]: Mute : 0
[  405.333530] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[  405.341234] [VID]: VIDEO_SLOWMOTION 0    1
[  405.346201] [VID]: VIDEO_FAST_FORWARD 0    1 0
[  405.351977] [VID]: VIDEO_CONTINUE 0  1
[  405.357263] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcce1e200
[  405.363667] [AUD]: Mute : 0

What I can do?
 
Last edited by a moderator:

AlexWilMac

Moderator
You can... tell us which image are you using (because is the most important info and you did not provide us with it) or you can try OBH, where drivers can be downloaded individually from the driver section of the Plugins.
 

Tururu

BH Lover
August T202 ==> ID 048d:9006
The August T202 I have is i9135, in OBH it would be the dvb-usb-it913x driver, in BH no idea.
El August T202 que tengo es i9135, en OBH seria el driver dvb-usb-it913x, en BH ni idea.
 

Jina

Vu+ Newbie
For weeks I searched for information about the installation of the T202.
With Filezilla Client I am able to move a file from windows 10 to a Vu + folder. I've also learned how to install IPK (all) with the black hole menu, and how to execute commands like lsusb or dmesg. ... opkg ...
I never connect the vu + solo4k to the internet.
I use an old router to connect to the pc and use Filezilla and others.
It seems then that the Black Hole sees in the
Bus 004 Device 002: ID 048d: 9006 to T202.
From here, what should I do ?, What should I look for ?, What should I execute?
Thank you.
 

Tururu

BH Lover
Windows drivers are not valid, nor are Linux drivers.
You have to look for a driver in BH prepared for the usb-tdt August T202, I don't use BH.
I use an image similar to OBH.
Option B is to buy the single or double DTT tuner that supports the VU+Solo4K if you do not use the slot it has.
In Spanish for me.
-----
No valen los driver de windows, tampoco los de linux.
Tienes que buscar driver en BH preparados para el usb-tdt August T202, no uso BH.
Utilizo una imagen similar a OBH.

La opcion B es comprar el tuner de TDT sencillo o doble que admite el VU+Solo4K si no usas el slot que tiene.
 

Jina

Vu+ Newbie
Hello, again very grateful for your response.
I have all the slots occupied.
I want to use the quadpip in the solo4k with the TDT stations, which in the end, in the covid19 stage, are the ones we see the most, that's why I need two more ground tuners. In addition to the August T202, I also have a WinTV-soloHD Sports Edition, ID 2040: 0264, which also appears with the lsusb -v command.
In the EM28xx cards list, it appears on line 94 -> PCTV tripleStick (292e) (em28178) [2013: 025f, 2040: 0264].
But, from here, I'm lost, I don't know what to do.
Could you give me new clues?
Thank you.
 

Tururu

BH Lover
As I indicate I do not use BH and that limits my answers a lot, I will have to install BH and see what drivers are available, I will look at it later out of curiosity.
What tuner do you have in the slot? of DTT twin? Also satellite.?
With the 8 tuners (FBC) in general you should not have problems the truth, comments out of curiosity.

A tuner that I remember that it is supported in BH and has 2 tuners for DTT is that of the PS3 (PlayTV) Sony, it uses the driver dvb-usb-dib0700.
In 2016 I had it with BH, with the images that I use, in tests, mount 2, with what I had 4 tuner available for DTT available (DVB-T).
It is a good tuner and it is cheap in the second hand market if you find it, from € 10 to € 30 uros.

Another one that touches is NPG REAL DVB-2T = Af9015 has 2 single DTT tuners (DVB-T).
In case you are looking for the VU + turbo USB-TDT, with one you would not have problems, but it does not support putting 2.
The colleagues who bought it report this problem.

As you remember, the VU+Solo4K does not support quadPIP well, hardware problem (electronics).
Recognized by VU+, 3 screens ok and 4 only audio well, video in black.
Some partner indicates that he pixelates from time to time, but generally black.

Change receiver in 2016 (VU+Solo4K) to not have these problems, I will see what drivers are supported in BH out of curiosity.
In Spanish for me.
--------------
Como indico no uso BH y eso limita mucho mis respuestas, tendre que instalar BH y ver que driver estan disponibles, lo mirare luego por curiosdad.
Que sintonizador tienes puesto en el slot? de TDT twin? Tambien de satelite.?
Con los 8 sintonizadores (FBC) en general no tendrias que tener problemas la verdad, comenta por curiosidad.

Un sintonizador que recuerdo que esta soportado en BH y tiene 2 tuner de tdt es el de la PS3 (PlayTV) Sony, usa el driver dvb-usb-dib0700.
En 2016 lo tenia con BH, con las imagenes que uso, en pruebas, monte 2, con lo que tenia 4 sintonizadore disponible de TDT disponibles (DVB-T).
Es un buen sintonizador y es barato en el mercado de segunda mano si lo encuentras, de 10€ a 30€uros.

Otro que toque es NPG REAL DVB-2T= Af9015 tiene 2 tuner de TDT sencillos (DVB-T).
Por si buscas el VU+ turbo USB-TDT, con uno no tendrias problemas, pero no soporta poner 2.
Los compañeros que lo compraron avisan de este problema.

Que recuerde, el VU+Solo4K no soporta bien quadPIP, problema de hardware (electronica).
Reconocido por VU+, 3 pantallas bien y la 4 solo audio bien, video en negro.
Algun compañero indica que le pixela de vez en cuando, pero negro en general.

Cambie de receptor en 2016 (VU+Solo4K) para no tener estos problemas, mirare que driver estan soportados en BH por curiosidad.
 

Jina

Vu+ Newbie
Thanks again.
The equipment EAN is 8809288541005, it has 2x DVB-S2 FBC / 1x DVB-C / T2 Dual, that is, 8 DVB-T2 NIM 7376 FBC, with the letters from A to H, and one dual NIM TT3L10, from I to J.
As for the quadPIP, indeed, the first three frames look good, although in my case, limitedly, having only one LNB. The fourth table, although it is sometimes seen and heard, is little refreshed, so it may be worth, for example, to see if the program that interests you begins, since in these alarm times, the emissions change schedules frequently .
A pity that it does not support two VU + turbo USB-TDT, the truth, because it has a very good reputation. I will look for the PS3 (PlayTV) Sony, and also, the NPG REAL DVB-2T. It will be nice to know what drivers the Solo4K supports. I wait with anxiety.
 
Top