Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dvbt 202

Discussion in 'Dispositivi DVB' started by monitos, Jan 9, 2019.

  1. monitos

    monitos Vu+ Newbie

    Messages:
    14
    Ciao
    Ho installato sul mio v+solo2 la BH 3.08, e non mi riconosce (come da titolo) la chivetta usb August dvbt 202
    cosa che prima con immagine BH 3.03 mi riconosceva, invece se metto quella di Sky luce blu la riconosce,ma non mi prende tutti i canali.
    qualche consiglio??
    Grazie
     
  2. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,844
    Serve l'output del comando "dmesg" dato dopo aver collegato la August T202.
     
  3. monitos

    monitos Vu+ Newbie

    Messages:
    14
    Non so dove trovare queste voci mi potresti delucidare sorry
    grazie
     
  4. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,844
    Apri putty
    Metti IP del box e premi invio
    Nella schermata che ti appare dove ti chiede il nome utente digiti root e premi invio
    Se ti chiede una password, scrivila e premi invio (ignora che non stia scrivendo niente a video)
    Digiti dmesg e premi invio
    Evidenzi con il mouse il testo e lo incolli nel thread .....
     
  5. monitos

    monitos Vu+ Newbie

    Messages:
    14
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
     
  6. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,844
    Serve tutto il testo e non solo l'ultima parte.
    Con Putty puoi anche acquisire il testo trascinando il mouse dal basso verso l'alto.....
     
  7. monitos

    monitos Vu+ Newbie

    Messages:
    14
    ok adesso mi scarico Putty poi ti invio i risultati
     
  8. monitos

    monitos Vu+ Newbie

    Messages:
    14
    BlackHole 3.0.8 vusolo2

    vusolo2 login: root
    root@vusolo2:~# dmesg
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    usb 2-1.3: bh_dvb_usb_v2: usb_bulk_msg() failed=-19
    i2c i2c-0: af9033: i2c rd failed=-19 reg=800047 len=1
    root@vusolo2:~#

    questo è quello che mi a creato putty
     
  9. monitos

    monitos Vu+ Newbie

    Messages:
    14
    Comunque non so cosa intendi per collegare, perchè come da testo non la riconosce, invece se intendi inserita su USB Ok
     
  10. monitos

    monitos Vu+ Newbie

    Messages:
    14
    questo l'ho creato con decoder acceso e pennetta sky riconosciuta e august non riconosciuta ma inserita nella porta USB

    BlackHole 3.0.8 vusolo2

    vusolo2 login: root
    root@vusolo2:~# dmesg
    ALSA device list:
    No soundcards found.
    UBIFS: parse sync
    UBIFS: background thread "ubifs_bgt0_0" started, PID 58
    input: ITE Technologies, Inc. USB Deivce as /devices/platform/ehci-brcm.1/usb2/2-1/2-1.4/2-1.4:1.1/input/input0
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7C7FB65B-0240-40DC-9FD0-B1B25984D821, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:12.
    devtmpfs: mounted
    Freeing unused kernel memory: 192K (80760000 - 80790000)
    hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. USB Deivce] on usb-ehci_hcd-1.4/input1
    scsi 2:0:0:0: Direct-Access General USB Flash Disk 1.00 PQ: 0 ANSI: 2
    sd 2:0:0:0: Attached scsi generic sg0 type 0
    sd 2:0:0:0: [sda] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sda] No Caching mode page found
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sd 2:0:0:0: [sda] No Caching mode page found
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sda: sda1
    sd 2:0:0:0: [sda] No Caching mode page found
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sd 2:0:0:0: [sda] Attached SCSI removable disk
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    udevd[85]: starting version 182
    WARNING: You are using an experimental version of the media stack.
    As the driver is backported to an older kernel, it doesn't offer
    enough quality for its usage in production.
    Use it with care.
    Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
    90173108f25ee792a5c3595c5467fb9a9c8d8a73 rename v4l2 some more func
    aba254366fa2c9446165f916917aee27162cb354 rename v4l2 some more func
    ff7c56ae372c05845f30415a4ef264b34bedb4ac rename v4l2 some more func
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    WARNING: You are using an experimental version of the media stack.
    As the driver is backported to an older kernel, it doesn't offer
    enough quality for its usage in production.
    Use it with care.
    Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
    90173108f25ee792a5c3595c5467fb9a9c8d8a73 rename v4l2 some more func
    aba254366fa2c9446165f916917aee27162cb354 rename v4l2 some more func
    ff7c56ae372c05845f30415a4ef264b34bedb4ac rename v4l2 some more func
    usb 2-1.3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
    usb 2-1.3: bh_dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
    usb 2-1.3: bh_dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
    DVB: registering new adapter (AVerMedia HD Volar (A867))
    i2c i2c-0: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
    usb 2-1.3: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
    rtusb init rt2870 --->


    === pAd = e05b9000, size = 511144 ===

    usbcore: registered new interface driver rt2870
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    mxl5007t 0-0060: creating new instance
    Registered IR keymap rc-empty
    input: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.1/usb2/2-1/2-1.3/bh-rc/rc0/input1
    rc0: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.1/usb2/2-1/2-1.3/bh-rc/rc0
    usb 2-1.3: bh_dvb_usb_v2: schedule remote query interval to 500 msecs
    usb 2-1.3: bh_dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
    usb 2-1.4: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
    usb 2-1.4: bh_dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
    usb 2-1.4: dvb_usb_af9035: [0] overriding tuner from 00 to 60
    usb 2-1.4: bh_dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
    DVB: registering new adapter (ITE 9135(9006) Generic)
    i2c i2c-1: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0
    usb 2-1.4: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
    usbcore: registered new interface driver dvb_usb_af9035
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    procmk_init
    bcm_event: module license 'Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    DVB: registering new adapter (_vuplus_solo2_)
    bcm7356: hotplug_callback():
    Hotplug - status.connected 1:0:0
    bcm7356: hotplug_callback():
    Hotplug - connecting HDMI to display 0xe
    [GP]:brcm_pwm_init

    bcm7356: hotplug_callback():
    Hotplug - status.connected 1:1:2
    brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
    [MPVR]: >> misc_pvr_init
    [VID]: 6bcm7335_video_init
    [AUD]: 6bcm7335_audio_init
    BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
    BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
    BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
    BKNI_Malloc(linuxkernel) top users:
    blocks, bytes, filename:line
    1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
    601, 132308, BSEAV/lib/utils/balloc.c:31
    386, 24704, magnum/commonutils/mrc/src/bmrc_monitor.c:666
    input: dreambox advanced remote control (native) as /devices/virtual/input/input2
    [LCD]: registered
    0:0
    [CI]: registered ci0
    [CI]: CI interface initialised

    [DFP]: registered dbox fp
    [DFP]: Scart 9597 is found 4

    [SC]: registered sci0
    [SC]: registered sci1
    system_time_set wakeup mode get
    system_time_set wakeup mode get 0xc4
    [VID]: VIDEO_SET_STREAMTYPE 0
    [VID]: VIDEO_SELECT_SOURCE 1 0
    [VID]: VIDEO_PLAY 1 2 0
    [VID]: VIDEO_CONTINUE 1 1
    [VID]: VIDEO_CLEAR_BUFFER 1 1 0
    [VID]: VIDEO_STOP 0 1
    [VID]: VIDEO_SELECT_SOURCE 0 0
    (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
    RTMP_TimerListAdd: add timer obj e0600a78!
    RTMP_TimerListAdd: add timer obj e0600aa8!
    RTMP_TimerListAdd: add timer obj e0600ad8!
    RTMP_TimerListAdd: add timer obj e0600a48!
    RTMP_TimerListAdd: add timer obj e06009b8!
    RTMP_TimerListAdd: add timer obj e06009e8!
    RTMP_TimerListAdd: add timer obj e05cb5ec!
    RTMP_TimerListAdd: add timer obj e05bade4!
    RTMP_TimerListAdd: add timer obj e05bae1c!
    RTMP_TimerListAdd: add timer obj e05cb690!
    RTMP_TimerListAdd: add timer obj e05cb58c!
    RTMP_TimerListAdd: add timer obj e05cb65c!
    -->RTUSBVenderReset
    Key1Str is Invalid key length(0) or Type(0)
    Key2Str is Invalid key length(0) or Type(0)
    Key3Str is Invalid key length(0) or Type(0)
    Key4Str is Invalid key length(0) or Type(0)
    1. Phy Mode = 5
    2. Phy Mode = 5
    NVM is Efuse and its size =2d[2d0-2fc]
    phy mode> Error! The chip does not support 5G band 15!
    RTMPSetPhyMode: channel is out of range, use first channel=1
    (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
    3. Phy Mode = 9
    AntCfgInit: primary/secondary ant 0/1
    AsicSetRxAnt, switch to main antenna
    MCS Set = ff 00 00 00 01
    0x1300 = 00064300
    ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 1147
    ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=1)
    RTMP_TimerListAdd: add timer obj e062f308!
    Rcv Wcid(1) AddBAReq
    Start Seq = 00000000
    RTMP_TimerListAdd: add timer obj e063131c!
    Rcv Wcid(1) AddBAReq
    Start Seq = 00000000
    RTMP_TimerListAdd: add timer obj e0631374!
    NET: Registered protocol family 10
    RTMP_TimerListAdd: add timer obj e062f348!
    BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
    [VID]: VIDEO_SET_STREAMTYPE 0
    [VID]: VIDEO_SELECT_SOURCE 1 0
    [VID]: VIDEO_PLAY 1 2 0
    [VID]: VIDEO_CONTINUE 1 1
    [VID]: VIDEO_CLEAR_BUFFER 1 1 0
    [VID]: VIDEO_STOP 0 1
    [VID]: VIDEO_SELECT_SOURCE 0 0
    [LCD]: unknown cmd 0x1015
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    [AUD]: AUDIO_SET_MUTE 0
    [AUD]: AUDIO_SET_MIXER -868557328
    [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
    [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [AUD]: AUDIO_SET_MIXER -868557328
    [AUD]: AUDIO_SET_MIXER : amixl 13, amixr 13
    [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [AUD]: AUDIO_SET_MIXER : next left volume -998, right volume -998
    dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [AUD]: AUDIO_SELECT_SOURCE 0
    [AUD]: AUDIO_SET_BYPASS_MODE 1
    [AUD]: downmix 0 state : 0
    [AUD]: AUDIO_PAUSE 0
    [AUD]: AUDIO_PLAY 0 decoder start : 0
    [VID]: VIDEO_SELECT_SOURCE 0 0
    [VID]: VIDEO_SET_STREAMTYPE 1
    [VID]: VIDEO_FREEZE 0 0
    [VID]: VIDEO_PLAY 0 5 2
    [VID]: VIDEO_SLOWMOTION 0 1
    [VID]: VIDEO_FAST_FORWARD 0 1
    [VID]: VIDEO_CONTINUE 0 1
    [AUD]: AUDIO_CONTINUE 0 1 aph=0xcb1b6580
    [AUD]: Mute : 0
    [AUD]: AUDIO_CHANNEL_SELECT 0
    dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [VID]: VIDEO_STOP 1 1
    [AUD]: AUDIO_STOP 0
    [AUD]: AUDIO_CONTINUE 0 0 aph=0x0
    [AUD]: AUDIO_CONTINUE aph=0 0 0
    dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [AUD]: AUDIO_SELECT_SOURCE 0
    [AUD]: AUDIO_SET_BYPASS_MODE 0
    [AUD]: AC3 downmix 0 state : 0
    [AUD]: AUDIO_PAUSE 0
    [AUD]: AUDIO_PLAY 0 decoder start : 0
    [VID]: VIDEO_SELECT_SOURCE 0 0
    [VID]: VIDEO_SET_STREAMTYPE 1
    [VID]: VIDEO_FREEZE 0 0
    [VID]: VIDEO_PLAY 0 5 2
    [VID]: VIDEO_SLOWMOTION 0 1
    [VID]: VIDEO_FAST_FORWARD 0 1
    [VID]: VIDEO_CONTINUE 0 1
    [AUD]: AUDIO_CONTINUE 0 1 aph=0xcb168380
    [AUD]: Mute : 0
    dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [VID]: VIDEO_STOP 1 1
    [AUD]: AUDIO_STOP 0
    [AUD]: AUDIO_CONTINUE 0 0 aph=0x0
    [AUD]: AUDIO_CONTINUE aph=0 0 0
    dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [AUD]: AUDIO_SELECT_SOURCE 0
    [AUD]: AUDIO_SET_BYPASS_MODE 1
    [AUD]: downmix 0 state : 0
    [AUD]: AUDIO_PAUSE 0
    [AUD]: AUDIO_PLAY 0 decoder start : 0
    [VID]: VIDEO_SELECT_SOURCE 0 0
    [VID]: VIDEO_SET_STREAMTYPE 0
    [VID]: VIDEO_FREEZE 0 0
    [VID]: VIDEO_PLAY 0 2 2
    [VID]: VIDEO_SLOWMOTION 0 1
    [VID]: VIDEO_FAST_FORWARD 0 1
    [VID]: VIDEO_CONTINUE 0 1
    [AUD]: AUDIO_CONTINUE 0 1 aph=0xcb1f3100
    [AUD]: Mute : 0
    dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [VID]: VIDEO_SLOWMOTION 0 1
    [VID]: VIDEO_FAST_FORWARD 0 1
    [VID]: VIDEO_CONTINUE 0 1
    [AUD]: AUDIO_CONTINUE 0 1 aph=0xcb1f3100
    [AUD]: Mute : 0
    [VID]: VIDEO_STOP 1 1
    [AUD]: AUDIO_STOP 0
    [AUD]: AUDIO_CONTINUE 0 0 aph=0x0
    [AUD]: AUDIO_CONTINUE aph=0 0 0
    [AUD]: AUDIO_SELECT_SOURCE 0
    [AUD]: AUDIO_SET_BYPASS_MODE 0
    [AUD]: AC3 downmix 0 state : 0
    [AUD]: AUDIO_PAUSE 0
    [AUD]: AUDIO_PLAY 0 decoder start : 0
    [VID]: VIDEO_SELECT_SOURCE 0 0
    [VID]: VIDEO_SET_STREAMTYPE 1
    [VID]: VIDEO_FREEZE 0 0
    [VID]: VIDEO_PLAY 0 5 2
    [VID]: VIDEO_SLOWMOTION 0 1
    [VID]: VIDEO_FAST_FORWARD 0 1
    [VID]: VIDEO_CONTINUE 0 1
    [AUD]: AUDIO_CONTINUE 0 1 aph=0xcb2dde00
    [AUD]: Mute : 0
    root@vusolo2:~#
     
    angelofsky1980 likes this.
  11. Shiro

    Shiro BH-C

    Messages:
    1,540
    Devi staccare tutto e spegnere decoder
    Poi lo accendi
    inserisci solo quella che non è riconosciuta e digiti subito il comando dopo che l'hai inserita
     
    angelofsky1980 likes this.
  12. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,844
    Ok era quello che mi aspettavo!
    Solo che analizzando il log, entrambi i device sono correttamente riconosciuti.......
    Procedi come indicato da @Shiro ... lavora solo con il device che NON funziona.
     
  13. monitos

    monitos Vu+ Newbie

    Messages:
    14
    BlackHole 3.0.8 vusolo2

    vusolo2 login: root
    root@vusolo2:~# dmesg
    hub 6-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
    usb 2-1: new high-speed USB device number 2 using ehci-brcm
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 1 port detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Success! Registering the characther device success with 0
    blackhole initialised
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    hub 2-1:1.0: USB hub found
    hub 2-1:1.0: 4 ports detected
    sdhci-pltfm: SDHCI platform and OF driver helper
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Key type dns_resolver registered
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    EBI CS0: setting up NAND flash (primary)
    NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
    NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
    brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    nand_read_bbt: bad block at 0x000001380000
    nand_read_bbt: bad block at 0x000002be0000
    nand_read_bbt: bad block at 0x000005060000
    nand_read_bbt: bad block at 0x0000050a0000
    Creating 4 MTD partitions on "brcmnand.0":
    0x000001f00000-0x000010000000 : "rootfs"
    0x000001f00000-0x000010000000 : "rootfs(redundant)"
    0x000000200000-0x000000900000 : "kernel"
    0x000000900000-0x000000a00000 : "mac"
    UBI: attaching mtd0 to ubi0
    usb 1-1: new high-speed USB device number 2 using ehci-brcm
    usb-storage 1-1:1.0: USB Mass Storage device detected
    scsi2 : usb-storage 1-1:1.0
    random: nonblocking pool is initialized
    usb 2-1.1: new high-speed USB device number 3 using ehci-brcm
    usb 2-1.2: new high-speed USB device number 4 using ehci-brcm
    hub 2-1.2:1.0: USB hub found
    hub 2-1.2:1.0: 4 ports detected
    UBI: scanning is finished
    UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 1793, bad PEBs: 7, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 1642/459, WL threshold: 4096, image sequence number: 1317694460
    UBI: available PEBs: 0, total reserved PEBs: 1793, PEBs reserved for bad PEB handling: 33
    UBI: background thread "ubi_bgt0d" started, PID 55
    ALSA device list:
    No soundcards found.
    UBIFS: parse sync
    UBIFS: background thread "ubifs_bgt0_0" started, PID 58
    UBIFS: recovery needed
    scsi 2:0:0:0: Direct-Access General USB Flash Disk 1.00 PQ: 0 ANSI: 2
    sd 2:0:0:0: Attached scsi generic sg0 type 0
    sd 2:0:0:0: [sda] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sda] No Caching mode page found
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sd 2:0:0:0: [sda] No Caching mode page found
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sda: sda1
    sd 2:0:0:0: [sda] No Caching mode page found
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sd 2:0:0:0: [sda] Attached SCSI removable disk
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7C7FB65B-0240-40DC-9FD0-B1B25984D821, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:12.
    devtmpfs: mounted
    Freeing unused kernel memory: 192K (80760000 - 80790000)
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    udevd[85]: starting version 182
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    rtusb init rt2870 --->


    === pAd = e0368000, size = 511144 ===

    usbcore: registered new interface driver rt2870
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    procmk_init
    bcm_event: module license 'Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    DVB: registering new adapter (_vuplus_solo2_)
    bcm7356: hotplug_callback():
    Hotplug - status.connected 1:0:0
    bcm7356: hotplug_callback():
    Hotplug - connecting HDMI to display 0xe
    [GP]:brcm_pwm_init

    brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
    [MPVR]: >> misc_pvr_init
    [VID]: 6bcm7335_video_init
    [AUD]: 6bcm7335_audio_init
    BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
    BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
    BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
    BKNI_Malloc(linuxkernel) top users:
    blocks, bytes, filename:line
    1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
    601, 132308, BSEAV/lib/utils/balloc.c:31
    388, 24832, magnum/commonutils/mrc/src/bmrc_monitor.c:666
    input: dreambox advanced remote control (native) as /devices/virtual/input/input0
    [LCD]: registered
    0:0
    [CI]: registered ci0
    [CI]: CI interface initialised

    [DFP]: registered dbox fp
    [DFP]: Scart 9597 is found 4

    [SC]: registered sci0
    [SC]: registered sci1
    system_time_set wakeup mode get
    system_time_set wakeup mode get 0xc4
    [VID]: VIDEO_SET_STREAMTYPE 0
    [VID]: VIDEO_SELECT_SOURCE 1 0
    [VID]: VIDEO_PLAY 1 2 0
    [VID]: VIDEO_CONTINUE 1 1
    [VID]: VIDEO_CLEAR_BUFFER 1 1 0
    [VID]: VIDEO_STOP 0 1
    [VID]: VIDEO_SELECT_SOURCE 0 0
    (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
    RTMP_TimerListAdd: add timer obj e03afa78!
    RTMP_TimerListAdd: add timer obj e03afaa8!
    RTMP_TimerListAdd: add timer obj e03afad8!
    RTMP_TimerListAdd: add timer obj e03afa48!
    RTMP_TimerListAdd: add timer obj e03af9b8!
    RTMP_TimerListAdd: add timer obj e03af9e8!
    RTMP_TimerListAdd: add timer obj e037a5ec!
    RTMP_TimerListAdd: add timer obj e0369de4!
    RTMP_TimerListAdd: add timer obj e0369e1c!
    RTMP_TimerListAdd: add timer obj e037a690!
    RTMP_TimerListAdd: add timer obj e037a58c!
    RTMP_TimerListAdd: add timer obj e037a65c!
    -->RTUSBVenderReset
    Key1Str is Invalid key length(0) or Type(0)
    Key2Str is Invalid key length(0) or Type(0)
    Key3Str is Invalid key length(0) or Type(0)
    Key4Str is Invalid key length(0) or Type(0)
    1. Phy Mode = 5
    2. Phy Mode = 5
    NVM is Efuse and its size =2d[2d0-2fc]
    phy mode> Error! The chip does not support 5G band 15!
    RTMPSetPhyMode: channel is out of range, use first channel=1
    (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
    3. Phy Mode = 9
    AntCfgInit: primary/secondary ant 0/1
    AsicSetRxAnt, switch to main antenna
    MCS Set = ff 00 00 00 01
    0x1300 = 00064300
    ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 940
    ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=1)
    Rcv Wcid(1) AddBAReq
    Start Seq = 00000000
    RTMP_TimerListAdd: add timer obj e03e031c!
    RTMP_TimerListAdd: add timer obj e03de308!
    Rcv Wcid(1) AddBAReq
    Start Seq = 00000000
    RTMP_TimerListAdd: add timer obj e03e0374!
    NET: Registered protocol family 10
    RTMP_TimerListAdd: add timer obj e03de348!
    [VID]: VIDEO_SET_STREAMTYPE 0
    [VID]: VIDEO_SELECT_SOURCE 1 0
    [VID]: VIDEO_PLAY 1 2 0
    [VID]: VIDEO_CONTINUE 1 1
    [VID]: VIDEO_CLEAR_BUFFER 1 1 0
    [VID]: VIDEO_STOP 0 1
    [VID]: VIDEO_SELECT_SOURCE 0 0
    [LCD]: unknown cmd 0x1015
    UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    [AUD]: AUDIO_SET_MUTE 0
    [AUD]: AUDIO_SET_MIXER -862249488
    [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
    [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [AUD]: AUDIO_SET_MIXER -862249488
    [AUD]: AUDIO_SET_MIXER : amixl 13, amixr 13
    [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [AUD]: AUDIO_SET_MIXER : next left volume -998, right volume -998
    usb 2-1.4: new high-speed USB device number 5 using ehci-brcm
    input: ITE Technologies, Inc. USB Deivce as /devices/platform/ehci-brcm.1/usb2/2-1/2-1.4/2-1.4:1.1/input/input1
    hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. USB Deivce] on usb-ehci_hcd-1.4/input1
    WARNING: You are using an experimental version of the media stack.
    As the driver is backported to an older kernel, it doesn't offer
    enough quality for its usage in production.
    Use it with care.
    Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
    90173108f25ee792a5c3595c5467fb9a9c8d8a73 rename v4l2 some more func
    aba254366fa2c9446165f916917aee27162cb354 rename v4l2 some more func
    ff7c56ae372c05845f30415a4ef264b34bedb4ac rename v4l2 some more func
    WARNING: You are using an experimental version of the media stack.
    As the driver is backported to an older kernel, it doesn't offer
    enough quality for its usage in production.
    Use it with care.
    Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
    90173108f25ee792a5c3595c5467fb9a9c8d8a73 rename v4l2 some more func
    aba254366fa2c9446165f916917aee27162cb354 rename v4l2 some more func
    ff7c56ae372c05845f30415a4ef264b34bedb4ac rename v4l2 some more func
    usb 2-1.4: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
    usb 2-1.4: bh_dvb_usb_v2: found a 'ITE 9135(9006) Generic' in cold state
    usb 2-1.4: bh_dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
    usb 2-1.4: dvb_usb_af9035: firmware version=3.39.1.0
    usb 2-1.4: bh_dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
    usb 2-1.4: dvb_usb_af9035: [0] overriding tuner from 00 to 60
    usb 2-1.4: bh_dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
    DVB: registering new adapter (ITE 9135(9006) Generic)
    i2c i2c-4: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0
    usb 2-1.4: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
    usbcore: registered new interface driver dvb_usb_af9035
    root@vusolo2:~#
     
    angelofsky1980 likes this.
  14. monitos

    monitos Vu+ Newbie

    Messages:
    14
    grazie ci sto provando
     
  15. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,844
    Ok questo log mostra che il dispositivo DVB USB è stato riconosciuto correttamente.
    Lascialo collegato alla porta USB attuale e riavvia il box.
    Dovresti riuscire a configurare da Enigma2 il nuovo tuner e (se non ci sono altri problemi) vedere anche i canali TV.
     
  16. monitos

    monitos Vu+ Newbie

    Messages:
    14
    E' da ieri che riavvio il decoder...cosa che mi riusciva prima con la versione 3.03 quando per qualche motivo, non mi riconosceva il dispositivo DVBT,invece cosa intendi per "configurare da Enigma2"
    GRAZIE
     
  17. Alexwilmac

    Alexwilmac BH Lover

    Messages:
    3,433
    Dall'interfaccia, dalle impostazioni tuner. Anche quando sono correttamente riconosciuti vanno comunque abilitati e configurati.
     
  18. monitos

    monitos Vu+ Newbie

    Messages:
    14
    il problema è che nelle impostazioni del tuner non viene visualizzato.....comunque ho risolto, acqustando un altro dispositivo, dal momento che non lo riconosce nemmeno il competer, ho dedotto fosse fritto.
    Grazie a tutti per l'aiuto.
    Marcello
     
  19. Alexwilmac

    Alexwilmac BH Lover

    Messages:
    3,433
    Ecco, questo mi sembra molto probabile ;)
     

Share This Page