Solo HD Channel artifacts

GerbenH

Vu+ Newbie
Dear all,

I have problems with HD channels on Astra 23.5. Although the SNR and BER of (for example) NED3 (see attached image) are fine, the video gets artifacts occasionaly (see the attached video around about 20sec). This is also the case for other HD channels on Astra 23.5. HD channels on the other satellites have no problem, and look fine.

Naturally you would suspect the LNB or the alignment of my dish, but everything is working fine when I connect the setup to the internal DVB-S receiver of my LG television.

1. Could there be signal problems, although the SNR and BER seem fine, which affect my VU+ Solo but not my LG tv?
2. Is it possible to get more debugging information from the Blackhole image, which might help me more in pin-pointing the exact problem?

My setup is 4 LNB's on Hotbird 13.0, Astra 19.2, Astra 23.5 and Astra 28,2 on a Diseq-C switch to my VU+ Solo. I am running Blackhole 2.0.8.

Thanks in advance.

Kind regards,
Gerben
 

Attachments

  • ned3_bad_image.png
    ned3_bad_image.png
    115.2 KB · Views: 8
  • 20131229 1138 - NED3 HD - De Nationale Wetenschapsquiz junior 2013.ts.zip
    23 MB · Views: 9
Top