How Do I Make My Own USB Backup Image

gus

Vu+ Newbie
Hi

how do I make my own usb backup image, I been using other people backup images, then I have to add all my favourite plugins etc, how do I make my own

i have black hole, I tried using blackhole Personal Backup, but this is not what I want, and TS Panel under system tools, there is somthing called image flashing & backup, but this not seem to work

hope you guys can help
 

angelofsky1980

BlackHole Driver Specialist
Hi

how do I make my own usb backup image, I been using other people backup images, then I have to add all my favourite plugins etc, how do I make my own

i have black hole, I tried using blackhole Personal Backup, but this is not what I want, and TS Panel under system tools, there is somthing called image flashing & backup, but this not seem to work

hope you guys can help

If your box is Duo or Solo into BH Addon Server there are backup script to make your USB or HDD backup.
 

a911

The BH Lover
Lets go step by step in making your own BH backup image:-

1-Dload the latest UBS BH image!
2-Extract the USB BH image directly into a clean/formatted USB!
3-Turn off your STB (press power button in the back of STB)
4-Remove any USB from the back of STB and internet wire!
5-Now we have BH image on USB,as per step 2, insert USB in the front slut!
6-Turn the Vu STB on from the power button!
7-Wait till U see @Vu+ small screen,,,REMOVE USB And REBOOT the Vu+, now power off the Vu , insert internet wire!
8-Turn on power of Vu+,, fallow the secreen instructions!
9-Now your BH image is ready!
10-Set your HDD (hard disk) and go to step 11.
11-GO to menu > setup> system > customize > change set up mode (< >) into expert! ,,,OK...exit!
12-GO to menu > setup> system > service searching > tuner configurations ,,,,set up the mode,,it depends on number of SAT U have,,,etc!
13-GO to menu > setup> system > service searching > Automatic Scan,,,,2Dload Channels,,,or some times its easy to just use READY setting available @ BH image server!
14-Install ,what ever plug in U desire, from Image server!

Now I assume the BH image @the STB is ready for Backup,,,so we continue!

14-Press green> blue (script) > BackUpIMG_HDD or USB,,,press ok, wait to complete , now your back up is done and avilable @ HDD,,and by using DCC utility U can find that the BKup is stored @HDD or USB!

Lets say that a new BH image is avilable and U like to up date,,,we do the following:-

16-Go to menu > BH Personal Back up,,BackUP (red),,press ok,,,wait,,,after finish,,,exit,,now BH P. Back up is been stored @HDD!
17-we apply step #1 to step # 9!
18-Now U only have to restore the BH P. Back up (it will have all your plug-ins, settings,,etc,,BUT NO old skins)!
19-Go to menu > BH Personal Back up,,,,Restore (green),,,wait,,,exit!

Now U have the new BH image plus all your setting , plug ins,,,etc!

Enjoy BH Image,,,the best ever!
a911
BH Lover..:inlove:!
 

gus

Vu+ Newbie
Lets go step by step in making your own BH backup image:-

1-Dload the latest UBS BH image!
2-Extract the USB BH image directly into a clean/formatted USB!
3-Turn off your STB (press power button in the back of STB)
4- Remove any USB from the back of STB and internet wire!
5- Now we have BH image on USB,as per step 2, insert USB in the front slut!
6-Turn the Vu STB on from the power button!
7-wait till U see @Vu+ small screen,,,REMOVE USB And REBOOT the Vu+, now power off the Vu , insert internet wire!
8- Turn on power of Vu+,, fallow the secreen instructions!
9- now your BH image is ready!
10- set your HDD (hard disk) and go to step 11.
11-GO to menu > setup> system > customize > change set up mode (< >) into expert! ,,,OK...exit!
12-GO to menu > setup> system > service searching > tuner configurations ,,,,set up the mode,,it depends on number of SAT U have,,,etc!
13-GO to menu > setup> system > service searching > Automatic Scan,,,,2Dload Channels,,,or some times its easy to just use READY setting available @ BH image server!
14-Install ,what ever plug in U desire, from Image server!

Now I assume the BH image @the STB is ready for Backup,,,so we continue!

14-Press green> blue (script) > BackUpIMG_HDD or USB,,,press ok, wait to complete , now your back up is done and avilable @ HDD,,and by using DCC utility U can find that the BKup is stored @HDD!

Lets say that a new BH image is avilable and U like to up date,,,we do the following:-

16-Go to menu > BH Personal Back up,,BackUP (red),,press ok,,,wait,,,after finish,,,exit,,now BH P. Back up is been stored @HDD!
17-we apply step #1 to step # 9!
18- Now U only have to restore BH P. Back up (it will have all plug in, setting,,etc,,BUT NO old skins)!
19-Go to menu > BH Personal Back up,,,,Restore (green),,,wait,,,exit!

Now U have the new BH image plus all your setting , plug ins,,,etc!

Enjoy BH Image,,,the best ever!
a911
BH Lover..:inlove:!

thanks alot, be trying to figure this out for ages, thanks for yor help
 

Clabs

Vu+ Newbie
I am interested in this but am struggling to make it work.
I have Blackhole 1.6.5 set up and working just as I want it. I want to make a usb backup that I can use to reflash if I should need to.
I don't have BackUpIMG_HDD or USB in my Green/Blue Scripts Panel so tried to install them via Green/Yellow/Addons Download Manager/Black Hole Image Scripts. Both the HDD and USB scripts cause my box to green screen and restart.
Any suggestions as to what I should try?
Thanks in advance and best regards
Mark
 

Muhammad Imran

Vu+ Newbie
Lets go step by step in making your own BH backup image:-

1-Dload the latest UBS BH image!
2-Extract the USB BH image directly into a clean/formatted USB!
3-Turn off your STB (press power button in the back of STB)
4-Remove any USB from the back of STB and internet wire!
5-Now we have BH image on USB,as per step 2, insert USB in the front slut!
6-Turn the Vu STB on from the power button!
7-Wait till U see @Vu+ small screen,,,REMOVE USB And REBOOT the Vu+, now power off the Vu , insert internet wire!
8-Turn on power of Vu+,, fallow the secreen instructions!
9-Now your BH image is ready!
10-Set your HDD (hard disk) and go to step 11.
11-GO to menu > setup> system > customize > change set up mode (< >) into expert! ,,,OK...exit!
12-GO to menu > setup> system > service searching > tuner configurations ,,,,set up the mode,,it depends on number of SAT U have,,,etc!
13-GO to menu > setup> system > service searching > Automatic Scan,,,,2Dload Channels,,,or some times its easy to just use READY setting available @ BH image server!
14-Install ,what ever plug in U desire, from Image server!

Now I assume the BH image @the STB is ready for Backup,,,so we continue!

14-Press green> blue (script) > BackUpIMG_HDD or USB,,,press ok, wait to complete , now your back up is done and avilable @ HDD,,and by using DCC utility U can find that the BKup is stored @HDD or USB!

Lets say that a new BH image is avilable and U like to up date,,,we do the following:-

16-Go to menu > BH Personal Back up,,BackUP (red),,press ok,,,wait,,,after finish,,,exit,,now BH P. Back up is been stored @HDD!
17-we apply step #1 to step # 9!
18-Now U only have to restore the BH P. Back up (it will have all your plug-ins, settings,,etc,,BUT NO old skins)!
19-Go to menu > BH Personal Back up,,,,Restore (green),,,wait,,,exit!

Now U have the new BH image plus all your setting , plug ins,,,etc!

Enjoy BH Image,,,the best ever!
a911
BH Lover..:inlove:!


everything going ok in your tutorial but i pause on setp 14....... i press gree > blue> but there is no option BackupIMG_HDD or USB........ (i am using blackhole 1.7.9 image)

press find solution for this, i am waiting, experts reply needed urgent, thanks

14-Press green> blue (script) > BackUpIMG_HDD or USB,,,press ok, wait to complete , now your back up is done and avilable @ HDD,,and by using DCC utility U can find that the BKup is stored @HDD!
 

a911

The BH Lover
everything going ok in your tutorial but i pause on setp 14....... i press gree > blue> but there is no option BackupIMG_HDD or USB........ (i am using blackhole 1.7.9 image)

press find solution for this, i am waiting, experts reply needed urgent, thanks

BH 1.79 is different!
No more Backup scripts!

Use:-
BH Full Backup from the menu and follow instruction displayed on screen!
 

Muhammad Imran

Vu+ Newbie
ok. i have seen backup option in main menu..

option 1: Blackhole Full Backup
option 2: Blackhole Personal Backup


i put usb in front of receiver, but it give error when i press Option 1........ please help me




sorry no device found to store backup. please check your media in black hole devices panel

where is device panel ??? give me location plz
 
ok. i have seen backup option in main menu..

option 1: Blackhole Full Backup
option 2: Blackhole Personal Backup


i put usb in front of receiver, but it give error when i press Option 1........ please help me






where is device panel ??? give me location plz


mate, you have to mount your usb first as media/usb
then
you can backup all of your settings including your image onto that usb
there is a big tutorial
http://www.vuplus-community.net/boa...d-usb-in-the-black-hole-devices-manger.10050/
and you will see there is your
DEVICES PANEL
under
(press) blue > blue > devices manager
 
Top