Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LCD4Linux Uno4K SE ,Ultimo4K,Solo4K ,Duo4K ,BH server

Discussion in 'Vu+ Skins & Bootlogos' started by WebMan, Jan 30, 2018.

  1. Evgen

    Evgen Vu+ Newbie

    Messages:
    8
    If I cost 50, then the delay in opening the channel is about 8-10 seconds. If set to 0, then the delay is approximately 2 seconds, as well as without the plugin.
    Test on Ultimo 4k.
     
  2. Nikei

    Nikei Vu+ Newbie

    Messages:
    12
    Set the delay 600 ms.
     
  3. nunigaia

    nunigaia Moderator

    Messages:
    5,428
    Can you please post your config files?

    I just need:

    1. Lcd4config
    2. skin_user.xml
    Both located at:

    Code:
    
    /etc/enigma2
    
    
    Use an FTP tool to copy the files to your PC ... ZIP IT ... and upload it here! :)

    best regards
    nunigaia
     
  4. Evgen

    Evgen Vu+ Newbie

    Messages:
    8
    Yes, I will publish the files today.
    My problem is exactly described in post # 68.
    I took the solution from the post # 70.
    After that, everything worked fine.
    The problem is with the Eutelsat 36A Satellite.
     
  5. Evgen

    Evgen Vu+ Newbie

    Messages:
    8
     

    Attached Files:

  6. pnobrega

    pnobrega Vu+ Newbie

    Messages:
    9
    awsome.. first time i got it to work without crashing... have the latest version of the plugin and of the firmware BH... Just one question, are this config files to the uno 4k se? because half the bottom screen doesn't show.. In the lcd4linux config / preview i see other info that i can't see in the actual lcd.

    thanks
     
  7. pnobrega

    pnobrega Vu+ Newbie

    Messages:
    9
    Got it.. already changed the size="400,240" in the skin_user but still the image appears croped... any thoughts?
     
  8. nunigaia

    nunigaia Moderator

    Messages:
    5,428
    If you have the right config files, just reboot your uno 4k se, and no dought´s.

    best regards
    nunigaia
     
  9. complexity

    complexity Vu+ Newbie

    Messages:
    15
    Hello,
    The plugin seem to work only on LCD. I have nice color letters on my LCD.
    The web interface is NOT working.
    When i go to
    http://192.168.1.80/lcd4linux/config
    i get HTTP 404 Not Found
    The Open Source Web Interface works OK. But not lcd4linux path.
    I have uninstalled and reinstalled plugin/config. No luck. Constantly get error 404.

    Ultimo 4K, latest Black Hole image 3.0.9.
    Thanks.
     
  10. complexity

    complexity Vu+ Newbie

    Messages:
    15
    Ultimo 4K, latest Black Hole image 3.0.9.
    Also, the USB flash drives are not mounted by default or after reboot. They never mount to /media/usb
    Only when i insert a flash, the receiver asks, if i want to play mp3 files from it. If i press OK, then it is mounted under
    /autofs/sdb1
    /dev/sdb1 on /autofs/sdb1 type vfat (rw,sync,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
    And when i exit Media Player, it gets automatically unmounted.
     
  11. Alexwilmac

    Alexwilmac Vip

    Messages:
    5,050
    By the image GUI, check the GLOBAL section, WEBIF allowed: set it as
    192.168.1.*
    (as I see your box address is 192.168.1.80) and see if it works.
     
  12. complexity

    complexity Vu+ Newbie

    Messages:
    15
    Hello,
    in the config file i have mentioned my network:
    config.WebIfAllow=127 192.168.
    I don't have access denied, i have 404 not found. :(
    Thanks,
     

    Attached Files:

  13. complexity

    complexity Vu+ Newbie

    Messages:
    15
    OK, i have put this 192.168.1.* into the file, restarted enigma, and i continue to get 404 error.
     
  14. Alexwilmac

    Alexwilmac Vip

    Messages:
    5,050
    Can you please post the plugin setup screen grab from the Addons?
     
  15. nunigaia

    nunigaia Moderator

    Messages:
    5,428
    This is your file ( attached ).

    1) Unzip the attached "lcd4config.zip", to obtain the file --> lcd4config

    2) Send it back to:

    Code:
    
    /etc/enigma2
    
    
    3) reboot your uno4kse

    4) You might have acess via OpenWebif to LCD4linux Setup, or by:

    Code:
    
    http://192.168.1.9/lcd4linux/config
    
    
    Where 192.168.1.9 is the address of my Uno4KSe ... you must use the IP of yours ... on your Network.

    best regards
    nunigaia

    Note: The issue is the adress:

    config.WebIfAllow=127 192.168. ... indeed is not this one but this:

    Code:
    
    config.WebIfAllow=127. 192.168. 172. 10.
    
    
     

    Attached Files:

    a911 likes this.
  16. ion_sc

    ion_sc Vu+ Newbie

    Messages:
    12
    Hello!

    Is possible to show program timeline on LCD display? I've Uno 4K SE

    Thanks
     
  17. ion_sc

    ion_sc Vu+ Newbie

    Messages:
    12
    Auto-answer.

    Yes, Is possible. I created this for VU+ UNO 4K SE:

    Captura de pantalla 2020-01-11 a las 3.14.41.png Captura de pantalla 2020-01-11 a las 3.08.21.png Captura de pantalla 2020-01-11 a las 3.07.59.png
     

    Attached Files:

    josagi and newgolfer like this.
  18. daroal

    daroal Vu+ Newbie

    Messages:
    20
    Buenos dias no entro mucho por motivos personales, pero soy miembro de este foro desde hace años,
    tengo un VU duo2 que tien,e varios años y funciona perfecto, queria probar el VUuno4kse y lo compre la semana pasada
    con este tengo un problema en instalar
    lcd4linux para VU uno4kse sigo los paso de lo que se comenta en estos tutoriales,
    voy a complementos a descargar lcd4linux y para instalar lcdlinux conf. al instalar el primer
    como se dice aqui una vez instalada me pone purse ok para reiniciar el intefal y hay biene el problema.-
    se bloquea y me sale una pantalla en verde el circulo buscando para iniciar pero no inicia pues lo he dejado
    varias horas y nada sigue bloqueado, temia averlo perdido y con una bakup lo he recuperado tres veces que intente
    instalar lcd4linux, el que descargo es para vuuno4kse = Lcd4linux v5.0-r6 es el que me sale a mi, y
    Lcd4linux config Uno4kse only (Black Hole E2) este no lo he podido instalar nunca por bloquearse el deco,
    ruego a ver si alguien me puede ayudar para solucionar este problema quizas alga algo mal no se pero sigo todos los paso indicados,
    si hay otra manera de hacer la instalacion con la ipk correctas que no se me bloque el deco, muchisimas gracias por vuestro trabajo
    y doy las Gracias por adelando. daroal
     
  19. daroal

    daroal Vu+ Newbie

    Messages:
    20
    ha perdon la imagen instalada Black Hole 3.0.9 si necesita más información la dare con mucho gusto
    gracias
     
  20. daroal

    daroal Vu+ Newbie

    Messages:
    20
    a mi me pasa lo mismo descargue de complementos tal como dices y se me bloqueo cada vez que lo intento
    hay otra forma de poder instalar, VUuno4kse Black Hole 3.0.9.L gracias
     

Share This Page