lnb unicable problem

ninja636

Vu+ Newbie
Hello
I have one solo4k one solo2 and one solo4kSE
all with black hole image (the last one)
now i bought a unicable lnb
and set up on the ground4K tunerA and tunerB (FBC tuner)
but I only have two tuners I can not see quad-pipes (only two channels)
if you set all tuner
A-scr1
B-scr2
C - scr3 and so to the tunerH I can already see in the quadpip the 4 channels

lnb 12.png

on uno4kSE I did the same thing
I will set the tuner A and the B and I stayed only with two tuners
if I want to have all I have to configure all the tuner with scr 3,4,5,6, ... etc
on the sameSEv2 the same thing scr 18, scr19, ...
Where am I to fail?

my lnb that (seems that does not work very well I lost 8% to 12% of signal)
It's this one:

GT-SAT Unicable-LNB GT-S3dCSS24 24UB mit 3 Legacy-Ausgang für DVB-S2 4K
13221
How do I configure this lnb?
I have 5-2400Mhz spliter to exit the lnb for all the boxes
then for the one I have splitter and for the one I have splitter and for the solose splitter too

someone can help me?
 

Tururu

BH Lover
@ninja636

Hispasat.
LNB.- GT-S3dCSS24 24UB.- 24SCR+3Legacy
VU+Solo4K Tuner FBC 4+4
VU+Uno4kSE Tuner FBC 4+4
VU+Solo2/VU+Solo SEV2, 2 Tuner normal.

VU+solo4K Tuner FBC 4+4 (8)
Tuner A. 975 (scr1)
Tuner B.1025 (scr2) +connected tuner A/conectado tuner A
Tuner C.1075 (scr3)
Tuner E.1125 (scr4)
Tuner F.1175 (scr5)
Tuner G.1225 (scr6)
Tuner H.1275 (scr7)
Tuner I.1325 (scr8)

VU+Uno4kSE Tuner FBC 4+4 (8)
Tuner A.1375 (scr9)
Tuner B.1425 (scr10) +connected tuner A/conectado tuner A
Tuner C.1475 (scr11)
Tuner E.1525 (scr12)
Tuner F.1575 (scr13)
Tuner G.1625 (scr14)
Tuner H.1675 (scr15)
Tuner I.1725 (scr16)

VU+solo2/VU+Solo SEV2, 2 Tuner normal/normal tuner
With normal LNB.
Cable to each A/B tuner to the Hispasat satellite.
--------
Con LNB normal/legacy (heredado)/With normal / legacy LNB
Cable a cada tuner A/B al satelite Hispasat/Cable to each A/B tuner to the Hispasat satellite.

Con el LNB unicable/ With the unicable LNB
Tuner A.1775 (scr17)
Tuner B.1825 (scr18) +connected tuner A/conectado tuner A


Free/Libres.- 1875 (scr19), 1925 (scr20), 1975 (scr21), 2025 (scr22), 2075 (scr23), 2125 (scr24)


As you have 3 normal outputs, use the Vu+Solo2/VU+solo SEV2 to verify the correct adjustment of the antenna/LNB position (counterpoised LNB/turn).

Where you have the receivers with a splitter/distributor of 4 outputs with power pass you have enough, there is a free mouth.

From the splitter, a cable to the Tuner A of each receiver.
The second tuner takes the signal using the internal loop (loop) that has the VU +.

Only the VU+Solo2/VU+Solo SEV2 has blind search, I do not know if it is used, I comment it with the unicable LNB does not work.
You can use it only if it is connected to a normal LNB.
If you use manual search using the relationship of tp/frequencies that the receiver has, there is no problem. It also works with unicable LNB.

The VU+uno4K does not touch it, but I have the same tuner in the Ultimo4k
The VU+solo2/VU+Solo4K I have it and the VU+Solo SEV2 has the same tuner as the VU+DUO2.
Apologies for the translation into English.
-------------
Como tienes 3 salidas normales, usa el Vu+Solo2/VU+Solo SEV2 para verificar el correcto ajuste de la posicion de la antena/LNB (contrapolado del LNB/giro).

Donde tienes los receptores con un splitter/repartidor de 4 salidas con paso de alimentacion tienes suficiente, queda una boca libre.

Del splitter un cable al Tuner A de cada receptor.
El segundo tuner toma la señal usando el bucle interno (loop) que tiene los VU+.

Solo el VU+Solo2/VU+Solo SEV2 tiene busqueda ciega, no se si la usa, lo comento pues con los LNB unicable no funciona.
Solo si esta conectada a un LNB normal la puedes utilizar.
Si usas busqueda manual usando la relacion de tp/frecuencias que tiene el receptor, no hay problema. funciona tambien con LNB unicable.

El VU+uno4K no lo toque, pero tengo el mismo tuner en el Ultimo4k
El VU+solo2/VU+Solo4K lo tengo y el VU+Solo SEV2 tiene el mismo tuner que el VU+DUO2.
 
Last edited:

Tururu

BH Lover
If the VU+Solo2 you use with a single cable with LNB legacy, important.
Tuner B.- Hispasat (antenna cable) <---OK

Tuner A.- connected/loop Tuner B

If it really is a VU+Solo SE V2 Twin tuner.
Tuner A.- Hispasat (antenna cable) <--OK
Tuner B.- connected / loop Tuner A
--------
Si el VU+Solo2 lo usas con un solo cable con LNB legacy, importante.
Tuner B.- Hispasat (cable antena) <--OK
Tuner A.- conectado/loop Tuner B

Si realmente es un VU+Solo SE V2 Twin tuner.
Tuner A.- Hispasat (antenna cable) <--OK
Tuner B.- conectado/loop Tuner A
 

ninja636

Vu+ Newbie
Hello
I have configured it so now
solo4k - dual tuner (fbc) + single tuner total3 tuners
tuner --- A --- scr1
tuner --- B --- scr2
tuner --- C --- scr3
tuner --- D --- scr4
tuner --- E --- scr5
tuner --- F --- scr6
tuner --- G --- scr7
tuner --- H --- scr8
tuner --- I --- scr9

uno4kse dual tuner (fbc)
tuner --- A --- scr10
tuner --- B --- scr11
tuner --- C --- scr12
tuner --- D --- scr13
tuner --- E --- scr14
tuner --- F --- scr15
tuner --- G --- scr16
tuner --- H --- scr17

solosev2 dual normal tuner

tuner --- A --- scr18
tuner --- B --- scr19

and so what should be configured?
tuner FBC sets up the A and the rest works?
I did so just A and B and stayed with only two tuners

I did not want to use legacy

translated by Google
 

Tururu

BH Lover
@ninja636
solo4k - dual tuner (fbc) + single tuner, FBC 4+4,+single = 9 Tuner.
tuner --- A --- scr1
tuner --- B --- scr2
tuner --- C --- scr3
tuner --- D --- scr4
tuner --- E --- scr5
tuner --- F --- scr6
tuner --- G --- scr7
tuner --- H --- scr8
tuner --- I --- scr9 (usar la boca libre del splitter/use the free mouth of the splitter)

uno4kse dual tuner (fbc) FBC 4+4 = 8 Tuner.
tuner --- A --- scr10
tuner --- B --- scr11+connected tuner A/conectado tuner A
tuner --- C --- scr12
tuner --- D --- scr13
tuner --- E --- scr14
tuner --- F --- scr15
tuner --- G --- scr16
tuner --- H --- scr17

VU+solosev2 dual normal tuner = 2 Tuner.
tuner --- A --- scr18
tuner --- B --- scr19+connected tuner A/conectado tuner A

***************************************************
and so what should be configured?
tuner FBC sets up the A and the rest works?
I did so just A and B and stayed with only two tuners
--------------------------------------------------------------------------------
y entonces, ¿qué debería ser configurado?
tuner FBC configura la A y el resto funciona?
Lo hice solo A y B y me quedé con solo dos sintonizadores
****************************************************

All the tuner of each receiver, with patience, similar to this with another LNB.
Todos los tuner de cada receptor, con paciencia, similar a esto con otro LNB.


FBC_3.jpg
 

Tururu

BH Lover
@ninja636
solo4k - dual tuner (fbc) + single tuner, FBC 4+4,+single = 9 Tuner.
tuner --- A --- scr1 (antena)
tuner --- B --- scr2+connected tuner A/conectado tuner A <-- ok
tuner --- C --- scr3
tuner --- D --- scr4
tuner --- E --- scr5
tuner --- F --- scr6
tuner --- G --- scr7
tuner --- H --- scr8
tuner --- I --- scr9 (usar la boca libre del splitter/use the free mouth of the splitter)
 

ninja636

Vu+ Newbie
hello turu
Thank you so much for the help you have given.
I begin to better understand the unibcable
but I still have a question

Does it mean I do not need to connect a cable to the B-Tuner?

I connect one cable to the tuner A and another to the tuner I and the tuner B does not connect a cable?

solo4k tuner fbc.png

like this?
thank you
 

kredka74

Vu+ Newbie
hello turu
Thank you so much for the help you have given.
I begin to better understand the unibcable
but I still have a question

Does it mean I do not need to connect a cable to the B-Tuner?

I connect one cable to the tuner A and another to the tuner I and the tuner B does not connect a cable?

View attachment 37084

like this?
thank you
Hi!
Looks ok when U use settings "loop thrue" B to A and D to C and U should use terminator 75Ohm for splitter non use port!
Regards:
Kredka74
 

AlexWilMac

Moderator
Well, two considerations:
1) ninja636 will be surely happy to get help after only 2 years by your post. What for?
2) ninja636 clearly showed he did not know, at the time, what's the behaviour of a SCR/Unicable LNB as he was so surprised he should not use a second cable or a splitter or anything connected to the other tuner. So it seems for you: a terminator? what for?
A single LNB acts like 4 or 8 or 16 or 32 LNBs, depending on your model. One cable, one physical (FBC) tuner; but FBC means many virtual tuners to use with the several SCR channels.
That's all and that's it.
 
Top