NEWBIE IN NEED OF HELP!!

B

bon1demarco

Vu+ Newbie
Hi
I was wandering if someone could help me please?
I preformed an update on my vu+solo2 and when it was finished my boxes screen has gone black,
when i turned the box off and on it just went to a black screen again.
I have looked at a few threads and downloaded files to flash the box as was directed to do on forums,
but my box would not update it just preformed the same as if i had no usb in it.
i have other files from work on it could this be a factor.
Does the usb need to be clean.
All help would be very much appreciated

Kind Regards
bon1demarco
 
Pyromon

Pyromon

BH Lover
Instructions for updating the image of Vu + Solo² via USB


Image on PC save (USB version)
unpack file
USB stick with the FAT file system or format FAT32
/ Create folder vuplus / Solo2 on the stick
Copy the 5 files in the directory / vuplus / Solo2 to the stick
Off VU + STB
remove all USB devices from the box
USB Stick infect
VU + STB Switch
Wait for the message update please press "Power"
Press "Power" button on the front of Solo²
waiting for message "Finished, Removing USB"
Disconnect USB stick from the box
Off VU + STB and restart

Try this. Take the right Image for your Solo2

Pyromon
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
bon1demarco said:
Hi
I was wandering if someone could help me please?
I preformed an update on my vu+solo2 and when it was finished my boxes screen has gone black,
when i turned the box off and on it just went to a black screen again.
I have looked at a few threads and downloaded files to flash the box as was directed to do on forums,
but my box would not update it just preformed the same as if i had no usb in it.
i have other files from work on it could this be a factor.
Does the usb need to be clean.
All help would be very much appreciated

Kind Regards
bon1demarco
Click to expand...
Usually this happen on clone boxes...... have you a genuine one?
 
B

bon1demarco

Vu+ Newbie
Pyromon said:
Instructions for updating the image of Vu + Solo² via USB


Image on PC save (USB version)
unpack file
USB stick with the FAT file system or format FAT32
/ Create folder vuplus / Solo2 on the stick
Copy the 5 files in the directory / vuplus / Solo2 to the stick
Off VU + STB
remove all USB devices from the box
USB Stick infect
VU + STB Switch
Wait for the message update please press "Power"
Press "Power" button on the front of Solo²
waiting for message "Finished, Removing USB"
Disconnect USB stick from the box
Off VU + STB and restart

Try this. Take the right Image for your Solo2

Pyromon
Click to expand...
Hi thank you for your advice can y
 
M

Mick12334

Moderator
Your first post states that you have a VU+ Solo 2, this post mentions a VU+ Solo, both are different receivers, and require an image, specific for your VU+ model.
Please check which VU+ model you have and download the correct image.
 
B

bon1demarco

Vu+ Newbie
Ya sorry it is a vu+solo2 have tried a few downloads and any time i put the usb in the box will not read the update i am using
a 8gb usb does it have to be 32gb
 
B

bon1demarco

Vu+ Newbie
Mick12334 said:
Your first post states that you have a VU+ Solo 2, this post mentions a VU+ Solo, both are different receivers, and require an image, specific for your VU+ model.
Please check which VU+ model you have and download the correct image.
Click to expand...
Ya sorry it is a vu+solo2 have tried a few downloads and any time i put the usb in the box will not read the update i am using
a 8gb usb does it have to be 32gb
 
Robocop1967

Robocop1967

Vu+ User
No it doesn't.The sticks you are using are quite big just for flashing an image.I use Kingston 4gb but I have used larger ones in the past.Try a smaller stick and when you find one that works just keep that one for flashing.
 
B

bon1demarco

Vu+ Newbie
Robocop1967 said:
No it doesn't.The sticks you are using are quite big just for flashing an image.I use Kingston 4gb but I have used larger ones in the past.Try a smaller stick and when you find one that works just keep that one for flashing.
Click to expand...
will give it ago robo.. think its the box its just not reading the info off usb.
 
You must log in or register to reply here.
Top