Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

NO R/W on Samsung 850EVO 250Gb on Ultimo4K

Discussion in 'Hard Disks internal / external' started by Hans Christian Kragh, Nov 29, 2017.

  1. Hans Christian Kragh

    Hans Christian Kragh Vu+ Newbie

    Messages:
    15
    Hi
    I have upgrated my VU+ Ultimo to an Ultimo4K, but I have not been able to use my Samsung 850EVO 250Gb in the new Ultimo4K.
    I use BlackHole-3.0.4-vuultimo4k Upgrated to "E", but I make to work with the SSD.

    Is there a driver missing for the SSD i 3.0.4 / ultimo4K?
     
  2. Matrix10

    Matrix10 Administrator

    Messages:
    8,849
    As far as I know, it does not need any special driver.

    Did you initialize it, mount it
    whether it is seen in the BH device manager ????
     
  3. Hans Christian Kragh

    Hans Christian Kragh Vu+ Newbie

    Messages:
    15
    It was not possible to initialize it. ├Źnitialize not visible in menu
     
  4. Matrix10

    Matrix10 Administrator

    Messages:
    8,849
    I do not have SSD in box but in principle have to work like every other disk.

    Are you sure it's well connected?
    If you have a chance you might try to first format it on a PC
     
  5. Alexwilmac

    Alexwilmac Vip

    Messages:
    4,170
    An SSD is nothing different from a HDD. So, if you don't see it listed, it means it's damaged or you did not connect it properly.
    After you see it listed (menu INFO / devices) and you have initialised it, you need to map it as /media/hdd.
    And, yes, format it under a PC if you can, by a Linux LiveCD as ExtFs4
     
  6. Hans Christian Kragh

    Hans Christian Kragh Vu+ Newbie

    Messages:
    15
    It did work properly in my old ultimo.
    I have now had mounted on my PC made a format, mounted on a Raspberry Pi 3 and formated in Extfs4.
    I will try in the upcoming weekend to mount it in my ultimo4k.
    I have an backup af my running 3.0.4.E on another SSD 128Gb as a fallback
     
  7. Hans Christian Kragh

    Hans Christian Kragh Vu+ Newbie

    Messages:
    15
    Update:
    My ATA(LITEON IT LCS-12) did the same, so I recon that it was the skin (not default) that made the error. I have now reinstalled with default skin, and have no errors.
     
    xteam likes this.

Share This Page