Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OpenBH 4.1 Vu+ Solo4K

Discussion in 'OpenBH Vu+ Solo4K Images' started by Ev0, Nov 21, 2017.

  1. Alexwilmac

    Alexwilmac Vip

    Messages:
    4,196
    Well, in my case, as there is (for instance) the file settings where you can find references to some plugins' configurations, you might have troubles if you copy it in a new image where some of these plugins are not also installed. So, you should install the same plugins you had in the old image before copying.
    Be aware that this procedure IS NOT SURE it won't cause any error messages or issues, IS NOT OFFICIAL, is just what I sometimes do if I'm too lazy to rebuild and re-set every personal parameters. As I said, it works for me conditioned to what I said. You should copy in your PC the whole content of this folder before experimenting so that you can replace it if it doesn't work.
    But, if it works, you'll find a lot of aspects already set, starting from the tuners configuration.
     
    hadiskamal likes this.
  2. Gold_66

    Gold_66 Vu+ User

    Messages:
    217
    This alone, is worth trying as I do the same boring adjustments for 12 sats each time. :rolleyes:
    Thanks for suggestions, I'll carefully try this next time.
     
  3. paperino61

    paperino61 Vu+ User

    Messages:
    439
    HI to all and thanks for great job..... I've problem with this image:

    You can see below my old post describing a problem with OBH 1.09..... with OBH 4.1 another camera has the same problem.
    Summing up:
    • using BH303 or PLI or BH04 I can see every streaming camera - all works fine
    • using OBH 1.09 I've the problem ONLY with ONE camera streaming (see below with reference to original post and example)
    • using OBH 4.1 I've the problem with two cameras in same way

    Some help please? I'd like to use OBH but for me is necessary can see the camera streaming

    tks in advance
    g.



    The only problem left for me is that described in post:
    http://www.vuplus-community.net/board/threads/problemi-con-flusso-da-telecamera.31307/#post-223727
    I try to translate:
    I'm trying to see a camera streaming like this :
    rtsp://192.168.168.54:554/11
    with bh303 or other (example PLI) it works fine but with OBH impossible to see, with last version too
     
  4. RamasG

    RamasG Vu+ Newbie

    Messages:
    5
    thanks for a good job
     
  5. hadiskamal

    hadiskamal Vu+ Newbie

    Messages:
    43
    FELLOWS IT MAY BE RIDICULOUS ASKING THIS QUESTION HERE BUT I CAN'T HELP IT FIND SOME PROPER THREADS:
    IS IT POSSIBLE FOR THE TEAM OR HAS THE ARM CHIPSETS GOT THE ABILITY FOR AN ANDROID PLATFORM
    i mean a hybrid set-top-box that could handle the ANDROID? for example in VU SOLO 4K or in ULTIMO 4K?
     
  6. Ev0

    Ev0 Administrator

    Messages:
    2,704
    In theory it is possible for the chipset to run Android.

    But this is something Vu+ would need to do, not the BH team.
     
    hadiskamal likes this.
  7. hadiskamal

    hadiskamal Vu+ Newbie

    Messages:
    43
    thank you Ev0 for the reply but could you please say what is needed for the android project for the start?knowing that the ANDROID is a derivation of LINUX.
     
  8. Ev0

    Ev0 Administrator

    Messages:
    2,704
    I have no idea, that is why I said it would be for Vu+ to do it and not the BH team
     
    hadiskamal likes this.
  9. hadiskamal

    hadiskamal Vu+ Newbie

    Messages:
    43
    hello friends i want to connect my bluetooth headphones to the vu+ solo 4k. is it possible by connecting the vu+ bluetooth 4.0 dongle?does this dongle support the audio stream?or i have to find other ways for connecting my headphones?
     
  10. Matrix10

    Matrix10 Administrator

    Messages:
    8,849
    As far as I know it is for remote.
     
    hadiskamal likes this.
  11. hadiskamal

    hadiskamal Vu+ Newbie

    Messages:
    43
    so i have to buy it to determine if it works. and as it is so important for me i will.but i think the vu+ company takes it so hard by making every aspect of the hardware and software(eventhough opensource) a mysterious story.i believe the developers' are working so good but for example the vpn . there's is just the openvpn.there is too many other easiest ways.or for the skins and other prohibited things(softcams)there is not a real easy working emu.TAKE IT EASY to the VU+ and to MYSELF.LOL
     
  12. Matrix10

    Matrix10 Administrator

    Messages:
    8,849
    There are no mysteries here
    I have not read anywhere that the vu+ bluetooth 4.0 dongle you can use for audio.

    and no exceptions, and discussion about emulators/softcams is here not allowed
    Read the rules of the forum
     
    Spany and hadiskamal like this.
  13. hadiskamal

    hadiskamal Vu+ Newbie

    Messages:
    43
    EXCUSE ME for the emulator talking but as everybody know one of the important and easiest functions of a bluetooth device is AUDIO transferring capability(sending and receiving audio)
     
  14. Matrix10

    Matrix10 Administrator

    Messages:
    8,849
    Not exactly
    vu+ bluetooth 4.0 dongle here has a different function.
    And so it's advertised.

    if you want audio you should buy bluethoot transmitter with optical input
    at least I think so with Solo 4K

    Description for "VU + Wireless USB Bluetooth 4.1 USB Dongle"
    The VU + Bluetooth dongle allows the extension of all VU + receivers for operation with the VU + Bluetooth remote control, making you independent of the conventional infrared control. Operate your receiver without any problems, even with concealed installation.

    optimized for the VU + Bluetooth remote control
    low power consumption
    Bluetooth 4.10

    Bluetooth 4.1 USB dongle suitable for:
    Uno 4K
    Solo 4K
     
    hadiskamal likes this.
  15. Alexwilmac

    Alexwilmac Vip

    Messages:
    4,196
    The best way to use headphones is an HDMI audio extractor and then connect to it any normal headphones, included the wireless ones. This is what I did.
     
    hadiskamal likes this.
  16. jomobe62

    jomobe62 Vu+ Newbie

    Messages:
    4
    Excellent image,Thanks
     
  17. hadiskamal

    hadiskamal Vu+ Newbie

    Messages:
    43
    hello friends i want to change the font of my solo 4k what should i do?i have transferred the font.ttf file to the address usr/share/font
     
  18. hadiskamal

    hadiskamal Vu+ Newbie

    Messages:
    43
    to the dear administrator
    would you please inform us about the latest updates of this beautifully developed image in this thread or in a new thread UPDATE MONITOR FOR OPENBH?
    thank your for the hard work
     
  19. bogdanm

    bogdanm Moderator

    Messages:
    2,204
    When is update is see in skin in left side skin; you see grean color .
     
    hadiskamal likes this.
  20. bogdanm

    bogdanm Moderator

    Messages:
    2,204
    Why you can change fonts ?
     
    hadiskamal likes this.

Share This Page