Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

satellite / tuner setup

Discussion in 'Black Hole General' started by 2style, Feb 2, 2011.

  1. 2style

    2style Vu+ Newbie

    Messages:
    3
    Hello,

    I just received my VU+ Solo with Enigma 2 image.

    I have problem for configuring the satellite setup.

    My dish is using 3 LNB for Hotbird 13, Amos 2/3 and EutelSat.

    I received all the channel from Hotbird, but nothing from Amos or EutelSat.

    I have configured my Tuner with DiSeqC A/B/C/D

    When I make a (manual) scan,

    (I select "type of scan=single satellite", and I select "satellite = Amos 2/3")

    after 3 minutes of scanning no service is added.

    With my previous demodulator, I was receiving these Amos channels.

    Could I get any help ? I don't know at all how to setup/configure Tuner and make the scan...

    Thanks very much for any help
    Patrick
     
  2. Mito

    Mito Administrator

    Messages:
    6,689
    Maybe there is a mistake into ports configuration.
    You should have something like to the attached screenshot.
     

    Attached Files:

    getzpk likes this.
  3. 2style

    2style Vu+ Newbie

    Messages:
    3
    Thanks very much Mito for your reply, it is working perfectly now [​IMG]
     
  4. reza_mousaviifee4563

    reza_mousaviifee4563 Vu+ Newbie

    Messages:
    20
    hello every body
    I have a Vu+ duo and one motorized Dish with 1 LNB, I have one Cabele connected to tuner a and Iwant to use that for my both tuners, and wach one channel when I record another Movie on different transponder and same SAT , I config tuner B, equal to tuner A or I tryed other opthins, but it doesnt work ...
    Please help me, how can I do this ?
     
  5. Mito

    Mito Administrator

    Messages:
    6,689
    If you have only one LNB, you can't see at the same time two channel from two different transponders.

    In any case, you have to configure your Tuner B as loopthrough to Tuner A not equal to Tuner A.
     
  6. cozma75

    cozma75 Vu+ Newbie

    Messages:
    4
    But if you use 7 LNB how to make configure. I configure my dish with 7 LNB but I received chanel from only 4 satellites. The satellites are : sirius5 ,hotbird 13, eutelsat 16, thor 0.9, astra 19, amos 4.0, eutelsat 7.0, Could you help me to configure corectly in the meniu? thank you
     
  7. Mito

    Mito Administrator

    Messages:
    6,689
    Sorry, really I don't know ho to setup the tuner for a switch DISEqC 8/1.
    As far I know, you can configure only switch DISEqC 2/1 or 4/1.

    Anyway, if you use a Vu+Duo, I think the easiest way to solve your issue is to use two switch 4/1.
    You may connect 4 LNB to the first switch DISEqC and the other three LNB to the second switch DISEqC, then you may connect the first switch to the Tuner A and the second switch to the Tuner B.
     
  8. cozma75

    cozma75 Vu+ Newbie

    Messages:
    4
    thank you for answer
     
  9. adetec

    adetec Vu+ Newbie

    Messages:
    4
    Hello room,I have V+ duo,pls I need someone to point me to how to set it up.
     
  10. a911

    a911 The BH Lover

    Messages:
    5,367
    Hi adetec,

    Can U please be more sprcific!
    Image setup or Dish setup!!

    Have Fun W/BH
     
  11. adetec

    adetec Vu+ Newbie

    Messages:
    4
    I have set the image up with the *****,but nothing is showing.I was getting channels before.but the bloke who set the system up for me is away.please just let me know how to link back to his server.thanks
     
  12. adetec

    adetec Vu+ Newbie

    Messages:
    4
    sorry for the error.******
     
  13. adetec

    adetec Vu+ Newbie

    Messages:
    4
    I allready have a dish set up.
     
  14. a911

    a911 The BH Lover

    Messages:
    5,367
    Please read the forum rules....!
    http://www.vuplus-community.net/rules.html
     
  15. Matrix10

    Matrix10 Administrator

    Messages:
    8,941
    I do not know precisely to tell you because i use a motor
    but to config 7 LNBs you have to use advanced mode in reception/tuner settings
    separately for each LNB.

    I'm sure that on the net (use google search) you can find information for 8 LNB
    which is the same configuration for 7 LNB
     
  16. Zupy

    Zupy Moderator

    Messages:
    802
    What dieseqc do you use?
    here is few ways depends of type of switch that you use

    version 1 - this is more frequently used

    lnb1----->diseqc1.1------>AA Uncommited input 1
    lnb2----->diseqc1.1------>AB Uncommited input 1
    lnb3----->diseqc1.1------>BA Uncommited input 1
    lnb4----->diseqc1.1------>BB Uncommited input 1

    lnb5----->diseqc1.1------>AA Uncommited input 2
    lnb6----->diseqc1.1------>AB Uncommited input 2
    lnb7----->diseqc1.1------>BA Uncommited input 2
    lnb8----->diseqc1.1------>BB Uncommited input 2

    Here is example screenshot of this adjustment in vu
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Option 2

    lnb1----->Uncommited input 1
    lnb2----->Uncommited input 2
    lnb3----->Uncommited input 3
    lnb4----->Uncommited input 4
    lnb5----->Uncommited input 5
    lnb6----->Uncommited input 6
    lnb7----->Uncommited input 7
    lnb8----->Uncommited input 8

    example for this
    [​IMG]

    [​IMG]
    etc....
     
  17. yashar1357

    yashar1357 Vu+ Newbie

    Messages:
    93
    Hi friends
    Possible to get different outs for different inputs? I means for example component for input A and HDMI fort input B. Could this be done by image developing?
     
  18. giamburrasca

    giamburrasca Vu+ Newbie

    Messages:
    13
     
  19. Zupy

    Zupy Moderator

    Messages:
    802
    What type of diseqc switch do you use??
     
  20. giamburrasca

    giamburrasca Vu+ Newbie

    Messages:
    13
    I just noted that for OPTION 2 there's no need to enter AA, AB, BC etc for "Commited DiseqC command", there should be "None". Hence, I mistakenly entered AA, AB for OPTION 2. Later I'll be home and try OPTION 2 without entering AA, AB... Hope it will solve my problem
     

Share This Page