Saudia TV HD , nilesat or Badr

bady71

Vu+ Newbie
hello all ,

please , can someone help me
i cannot get the saudia tv hd on nilesat or Badr with my Vu Ultimo
when i tried with another receiver , the channels works

hope i can make the right tuner configuration


thanks to all
 

Mick12334

Moderator
You need to check your signal quality levels, some receivers have a more sensitive tuner, than others, I've noticed it takes more signal quality, to lock, and scan in, weaker quality levels, on my VU+ Duo 2, than my other receivers, but once tuned in the VU+ performs equally as well as my other receivers.

If it is a signal quality issue we need your general location, and dish size.
 

bady71

Vu+ Newbie
my location is Dubai , my dish size is 120cm
the other channels are perfectly work with my Vu ultimo , just the frequencies of this channels cannot be reach


thx to you ,
 

Mick12334

Moderator
Are you using a V-Box II, by any chance, or any other devices, which connect to your receiver?
You could also check if those frequencies are affected by a DECT telephone.
 

bady71

Vu+ Newbie
no other devices are connected to Vu+
when i transfer the channels with dreamboxEDIT , signal have 77% but no sound or picture
 

Mick12334

Moderator
Try manually scanning in the transopnders.
I have found a Saudi TV 1 HD listed on 26E, 12149 H 27500 DVB-S2 8PSK 5/6, and on
Yahsat 1A 52.5E, 11747 H 27500 DVB-S2 QPSK 8/9
 

Mick12334

Moderator
The Tuner configuration depends on your satellite set up, do you have a fixed dish, single LNB, pointing at 26E, motorized dish, multiple dishes, and LNB's, using a Diseqc switch?
 

bady71

Vu+ Newbie
i've one diseqc with 3 sat , 26e is in port 3
i capturing all frequencies in 26e , only this frequency not coming
 

Mick12334

Moderator
Try running a cable directly from the LNB to your receiver then try scanning in those frequencies, removing the Diseqc switrch, from the setup, just to confirm that the Diseqc switch isn't causing the problem.
 

Mick12334

Moderator
Just because it works with a different receiver doesn't mean that it's compatible with your VU+.
Only by trying everything, will you isolate the problem, including DECT telephone interference, as different receivers are more susceptible to interference.
 

bady71

Vu+ Newbie
still same problem ...

some channels not coming when i make an tuner automatic scanning , just when i do a blind scan plugin , they comes !!!!


you've idea ?!?!?
 

bady71

Vu+ Newbie
hi ,
still same problem
i changed lnb , i changed DiSEqC
i connect the lnb directly to receiver ,, not coming the mentioned channels

maybe the problem from receiver manufacturing

can someone give explication ,
 

thameur101

Vu+ User
hello all ,

please , can someone help me
i cannot get the saudia tv hd on nilesat or Badr with my Vu Ultimo
when i tried with another receiver , the channels works

hope i can make the right tuner configuration


thanks to all
Hello please remove lnb switch diseqc or change it
 

bogdanm

Moderator
still same problem ...

some channels not coming when i make an tuner automatic scanning , just when i do a blind scan plugin , they comes !!!!


you've idea ?!?!?
You no try used setting made by vaniball or other setting created by developers
 
Top