i have a tp link adapter tl-wn727n and vu+ solo with bh 2.0.2 E, when i tried to install it, all the parameters are correct and the network is OK but no internet connection
i've done what says "http://www.vuplus-community.net/board/threads/wifi-drivers-how-to-report-problems.11437/" and i created a wifi.txt as said angelofsky1980.6
my solo is linked also with a bridge wifi like this
Thanks a lot for your help
i've done what says "http://www.vuplus-community.net/board/threads/wifi-drivers-how-to-report-problems.11437/" and i created a wifi.txt as said angelofsky1980.6
my solo is linked also with a bridge wifi like this
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ohci_hcd
S: Product=Broadcom STB OHCI
S: SerialNumber=ohci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ohci_hcd
S: Product=Broadcom STB OHCI
S: SerialNumber=ohci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ehci_hcd
S: Product=Broadcom STB EHCI
S: SerialNumber=ehci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=5370 Rev= 1.01
S: Manufacturer=TPlink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I:* If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ehci_hcd
S: Product=Broadcom STB EHCI
S: SerialNumber=ehci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
br0 Link encap:Ethernet HWaddr 00:1D:EC:04:36:BC
inet addr:192.168.1.3 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::21d:ecff:fe04:36bc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1284 errors:0 dropped:0 overruns:0 frame:0
TX packets:322 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90772 (88.6 KiB) TX bytes:28068 (27.4 KiB)
eth0 Link encap:Ethernet HWaddr 00:1D:EC:04:36:BC
inet6 addr: fe80::21d:ecff:fe04:36bc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1335 errors:0 dropped:0 overruns:0 frame:0
TX packets:332 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:131287 (128.2 KiB) TX bytes:30824 (30.1 KiB)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:68 errors:0 dropped:0 overruns:0 frame:0
TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5892 (5.7 KiB) TX bytes:5892 (5.7 KiB)
wlan0 Link encap:Ethernet HWaddr 90:F6:52:0B:1C:C4
inet6 addr: fe80::92f6:52ff:fe0b:1cc4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Ralink STA ESSID:"11n-AP" Nickname:"RT2870STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thrff Fragment thr
Encryption key
Link Quality=10/100 Signal level:0 dBm Noise level:0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
wlan0 Scan completed :
Cell 01 - Address: 64:68:0C:0A:29:62
Protocol:802.11b/g
ESSID:"*******"
Mode:Managed
Frequency:2.412 GHz (Channel 1)
Quality=57/100 Signal level=-67 dBm Noise level=-92 dBm
Encryption key
Bit Rates:54 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Success! Registering the characther device success with 0
blackhole initialised
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
EBI CS0: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=00000101, nandConfig=55042200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000100, nandConfig=55042200
Block size=00020000, erase shift=17
NAND Config: Reg=55042200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0
Found NAND on CS0: ACC=d3000000, cfg=55042200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0200 128MB @00000000
B4: NandSelect=40000100, nandConfig=55042200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000100, nandConfig=55042200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000100
brcmnand_scan: After nand_select = 40000100
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 2.0 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
nand_read_bbt: Bad block at 0x016a0000
nand_read_bbt: Bad block at 0x070c0000
Creating 7 MTD partitions on "brcmnand.0":
0x000000000000-0x000007400000 : "rootfs"
0x000007400000-0x000007800000 : "kernel"
0x000007800000-0x000007c00000 : "boot"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
usb 2-1: new high speed USB device number 2 using ehci-brcm
UBI: max. sequence number: 3533
UBI: attached mtd0 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 116 MiB
UBI: number of good PEBs: 926
UBI: number of bad PEBs: 2
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 926
UBI: number of PEBs reserved for bad PEB handling: 9
UBI: max/mean erase counter: 33/3
UBI: image sequence number: 1048773279
UBIFS: parse sync
UBI: background thread "ubi_bgt0d" started, PID 37
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 114532352 bytes (111848 KiB, 109 MiB, 902 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:12.
Freeing unused kernel memory: 208k freed
NET: Registered protocol family 10
procmk_init
dvb_bcm7325: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vusolo)
bcm7335: hotplug_callback():
Hotplug - status.connected 1
bcm7335: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: <6>bcm7335_video_init
[AUD]: <6>bcm7335_audio_init
DVB: registering adapter 0 frontend 0 (BCM7335 FE)...
[MPVR]: >> misc_pvr_init
input: dreambox remote control (native) as /devices/virtual/input/input0
[LCD]: registered
[LCD]ower led off
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[CI]: registered ci0
[CI]: registered ci1
[DFP]: registered dbox fp
[DFP]:max9597_Shutdown data = 0x80
[SC]: registered sci0
system_time_set wakeup mode get
[LCD]:bm730_dbox_lcd_write_read_data len: 8
[LCD]:rtc data received 4
system_time_set wakeup mode get 0xc4
udevd (106): /proc/106/oom_adj is deprecated, please use /proc/106/oom_score_adj instead.
rtusb init rt2870 --->
=== pAd = c1261000, size = 558768 ===
<-- RTMPAllocAdapterBlock, Status=0
Efuse Size=0x2d [2d0-2fc]
NVM is EFUSE
NICLoadFirmware: We need to load firmware
<-- RTMPAllocTxRxRingMemory, Status=0
RTMP_TimerListAdd: add timer obj c12a97f8!
RTMP_TimerListAdd: add timer obj c12a9828!
RTMP_TimerListAdd: add timer obj c12a9858!
RTMP_TimerListAdd: add timer obj c12a97c8!
RTMP_TimerListAdd: add timer obj c12a9738!
RTMP_TimerListAdd: add timer obj c12a9768!
RTMP_TimerListAdd: add timer obj c12630dc!
RTMP_TimerListAdd: add timer obj c1263124!
RTMP_TimerListAdd: add timer obj c126316c!
RTMP_TimerListAdd: add timer obj c12631b4!
RTMP_TimerListAdd: add timer obj c1273d6c!
RTMP_TimerListAdd: add timer obj c126309c!
RTMP_TimerListAdd: add timer obj c12631f8!
RTMP_TimerListAdd: add timer obj c1273e10!
RTMP_TimerListAdd: add timer obj c1273d0c!
RTMP_TimerListAdd: add timer obj c1273ddc!
-->RTUSBVenderReset
<--RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 5
2. Phy Mode = 5
NVM is Efuse and its size =2d[2d0-2fc]
phy mode> Error! The chip does not support 5G band 15!
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 9
AntCfgInit: bTxRxSwAntDiv 0
[mAntCfgInit: primary/secondary ant 0/1
[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 37, RF_R17 = 0
AsicSetRxAnt, switch to main antenna
bAutoTxAgcG = 0
---> InitFrequencyCalibration
InitFrequencyCalibration: frequency offset in the EEPROM = 37
<--- InitFrequencyCalibration
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
usbcore: registered new interface driver rt2870
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
device eth0 entered promiscuous mode
br0: port 1(eth0) entering forwarding state
br0: port 1(eth0) entering forwarding state
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
svc: failed to register lockdv1 RPC service (errno 124).
eth0: no IPv6 routers present
br0: no IPv6 routers present
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
br0: port 1(eth0) entering forwarding state
[LCD]:dbox_lcd_open
[LCD]:dbox_lcd_ioctl cmd : 4117
[LCD]: unknown cmd 0x1015
[DFP]:dbox_fp_open
[CI]:ci_dev_open
[CI]:Opening A GPIO's for 7325 platform
[CI]:Opening A GPIO's for 7325 platform....done
[CI]:entering.. A NEXUS_DvbCi_Open
[CI]:NEXUS_DvbCi_Open done..
[CI]:Installing callbacks
[CI]:Forcing card check
[CI]:Card insertion status changed
[CI]:Opening B GPIO's for 7325 platform
[CI]:Opening B GPIO's for 7325 platform....done
[CI]:entering.. B NEXUS_DvbCi_Open
[CI]:NEXUS_DvbCi_Open done..
[CI]:Installing callbacks
[CI]:Forcing card check
[CI]:Card B insertion status changed
[CI]: CI interface initialised
[CI]:ci1_dev_open
[CI]:NEXUS_Remux_Start
[CI]:>>close_mpod tuner:0
[CI]:remux stop
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:>>close_mpod tuner:1
[CI]:remux stop
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
wlan0: no IPv6 routers present
[DFP]:dbox_fp_open
[DFP]:dbox_fp_ioctl cmd : 0
[DFP]:dbox_fp_ioctl cmd : 256
[DFP]:dbox_fp_release
[DFP]:scart_select_tvvideotype TV = 0
[DFP]:max9597_fast_blanking data = 0x0
[DFP]:max9597_enable_output data = 0x6
[DFP]:scart_select_screentype aRatio = 1
[DFP]:max9597_slow_blanking data = 0x3
[DFP]:scart_select_tvout aTVOutType = 2
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[DFP]:scart_select_screentype aRatio = 2
[DFP]:max9597_slow_blanking data = 0x1
[LCD]:bm730_dbox_lcd_write_read_data len: 8
[LCD]:rtc data received 4
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2064196112
[AUD]: AUDIO_SET_MIXER -2064196112
[DFP]:dbox_fp_ioctl cmd : 7
[DFP]:dbox_fp_ioctl FP_IOCTL_GET_VCR
[DFP]:dbox_fp_release
[CI]:ci_dev_release
[CI]:ci_dev_release
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[LCD]:dbox_lcd_open
[LCD]:dbox_lcd_ioctl cmd : 4117
[LCD]: unknown cmd 0x1015
[DFP]:dbox_fp_open
[CI]:ci_dev_open
[CI]:ci1_dev_open
[CI]:NEXUS_Remux_Start
[CI]:>>close_mpod tuner:0
[CI]:remux stop
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:>>close_mpod tuner:1
[CI]:remux stop
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt count : 0
[CI]:get_remux_startcnt() count : 0
[DFP]:dbox_fp_open
[DFP]:dbox_fp_ioctl cmd : 0
[DFP]:dbox_fp_ioctl cmd : 256
[DFP]:dbox_fp_release
[DFP]:scart_select_tvvideotype TV = 0
[DFP]:max9597_fast_blanking data = 0x1
[DFP]:max9597_enable_output data = 0x6
[DFP]:scart_select_screentype aRatio = 1
[DFP]:max9597_slow_blanking data = 0x3
[DFP]:scart_select_tvout aTVOutType = 2
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[DFP]:scart_select_screentype aRatio = 2
[DFP]:max9597_slow_blanking data = 0x1
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2063868432
[AUD]: AUDIO_SET_MIXER -2063868432
[DFP]:dbox_fp_ioctl cmd : 7
[DFP]:dbox_fp_ioctl FP_IOCTL_GET_VCR
[CI]:>>slot 1 inserted
[CI]:bm750_slot_reset slot:1
[CI]:changing to DVB Mode slot 1
FE tune
[CI]:bm750_slot_ts_enable slot:1
[CI]: in_reset: register_slot(1)
[CI]: reset: new_tc(0)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0bc530c
[AUD]: setting mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 3
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 0 slot :1
!!!reset oldtime
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0bc530c
[AUD]: setting mute : 0
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 6 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:ci_dev_ioctl cmd : 0
[0;35m[CI]:[0;0munknown cmd 0x0000
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 8 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 8 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 6 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 6 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 6 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 35 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 12 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 4 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 6 reason : 2
[CI]:ci_dev_poll :: POLLIN
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :1
[CI]:>>bm750_transport_callback free : 65534, data_length : 14 reason : 2
[CI]:ci_dev_poll :: POLLIN
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[LCD]:bm730_dbox_lcd_write_read_data len: 8
[LCD]:rtc data received 4
!!!reset oldtime
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 139
Thanks a lot for your help
, i think the driver is in the new soft 