Tune failed with open BH !!!

[devac]

After flashing UNO with OpenBlackHole-0.1-vuuno_usb_nightly_20150619_78a407f , i keep getting "tune failed" at some channels... Reception setting menu in new software is changed and i suppose that is where it went wrong... Here, some images of configuration in old software - BlackHole-2.1.6-vuuno_usb_release_20150521_6404c21: Besides Hotbird, there are four more lnbs in use: 16, 19.2, 23.5 and 28.2. and all worked well.
...And this is how i configured it in OBH:What's wrong?! plz help, anyone.....

 

[nunigaia]

After flashing UNO with OpenBlackHole-0.1-vuuno_usb_nightly_20150619_78a407f , i keep getting "tune failed" at some channels... Reception setting menu in new software is changed and i suppose that is where it went wrong... Here, some images of configuration in old software - BlackHole-2.1.6-vuuno_usb_release_20150521_6404c21:View attachment 23958 Besides Hotbird, there are four more lnbs in use: 16, 19.2, 23.5 and 28.2. and all worked well.
...And this is how i configured it in OBH:View attachment 23959What's wrong?! plz help, anyone.....

Try this config ...

I have only 2 diseqc positions, you can adapt it to your configuration.

First sat position ( see the screen shot .. ) Astra 19.2 East




Snd sat position ( see the screen shot .. ) Hotbird 13º East



Compare it, and adapt to that one that match your settings.

best regards
nunigaia

 

[devac]

Thanks for your help Nunigaia,

Found a configuration similar to mine explaind on internet. The only diference with my settings above was "sequence repeat" turned on!
I done that and put in a new channel list. So far, i checked one lnb and it all works!!! I doubt the channel list could have be the problem, but not 100% sure...
Anyway, i am happy to get it going again.


best regards,
devac