VU+ BH 1.7.8 e Technisat USB

stich86 · Nov 6, 2012

ciao ragazzi,

finalmente ho preso il bimbo.. ho caricato subito la BH 1.7.8 perchè il firmware originale non trovava nulla (era del 2011). Funziona perfettamente con l'Unicable e spero a breve di poter mettere su dei settings fatti come si deve (ci ho giocato poco perchè sono fuori per una settimana

). Mentre lo provavo, ho inserito nella porta USB posteriore una scheda Technisat USB HD2 (quella nera per capirci), ma andando nei Tuner non la vedeva. Ma è supportata? O devo comprare una S660?

In attesa del tuner Twin, la mia intenzione era quella di collegare una seconda TV con XBMC PVR per vedere i canali sia in salone che in camera senza dover comprare un'altro dec..

La macchina dovrebbe farcela no? Visto che comunque sarà possibile montarci sopra il Twin

Grazie!

alfa_omega · Nov 6, 2012

stich86 said:
Mentre lo provavo, ho inserito nella porta USB posteriore una scheda Technisat USB HD2 (quella nera per capirci), ma andando nei Tuner non la vedeva. Ma è supportata? O devo comprare una S660?

Io non so se sia supportata o no, ma come minimo devi riavviare il decoder....

stich86 · Nov 6, 2012

alfa_omega said:
Io non so se sia supportata o no, ma come minimo devi riavviare il decoder....

addirittura?!? è linux... poi è una periferica USB, ad esempio la chiavetta wifi l'ha vista a caldo
credo proprio che non ci siano i driver, purtroppo non ho avuto modo di fare un SSH per vedere cosa vedeva..

ho comunque preso una S660 su ebay a 40€, vediamo come va con quella

angelofsky1980 · Nov 6, 2012

stich86 said:
addirittura?!? è linux... poi è una periferica USB, ad esempio la chiavetta wifi l'ha vista a caldo
credo proprio che non ci siano i driver, purtroppo non ho avuto modo di fare un SSH per vedere cosa vedeva..

ho comunque preso una S660 su ebay a 40€, vediamo come va con quella

Appena hai possibilità, posta qualche info riguardo la HD2.

stich86 · Nov 7, 2012

angelofsky1980 said:
Appena hai possibilità, posta qualche info riguardo la HD2.

perfetto, appena torno a casa posto un lsusb e un cat di /proc

angelofsky1980 · Nov 7, 2012

stich86 said:
perfetto, appena torno a casa posto un lsusb e un cat di /proc

Il cat di /proc/bus/usb/devices è fondamentale

stich86 · Nov 7, 2012

no problem, venerdì sera posto tutto

stich86 · Nov 10, 2012

niente, agganciandola non trova nulla

dmesg:

usb 2-1: new high speed USB device number 2 using ehci-brcm

cat /proc/bus/usb/devices:

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ohci_hcd
S: Product=Broadcom STB OHCI
S: SerialNumber=ohci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ohci_hcd
S: Product=Broadcom STB OHCI
S: SerialNumber=ohci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ehci_hcd
S: Product=Broadcom STB EHCI
S: SerialNumber=ehci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=14f7 ProdID=0500 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 0 Alt= 1 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 0 Alt= 2 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=02(O) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 0 Alt= 3 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=02(O) Atr=01(Isoc) MxPS= 512 Ivl=125us
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=01(Isoc) MxPS= 512 Ivl=125us
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.01
S: Manufacturer=Linux 3.1.1 ehci_hcd
S: Product=Broadcom STB EHCI
S: SerialNumber=ehci_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=8172 Rev= 2.00
S: Manufacturer=Manufacturer Realtek
S: Product=RTL8191S WLAN Adapter
S: SerialNumber=00e04c000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=r8712u
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0d(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

a quanto pare non c'è nemmeno un driver

angelofsky1980 · Nov 10, 2012

stich86 said:
niente, agganciandola non trova nulla

dmesg:

cat /proc/bus/usb/devices:

a quanto pare non c'è nemmeno un driver

Allora visti gli output, visti gli ID USB, ho trovato un interessante pagina sul web che specifica il corretto supporto....

Mò ci guardo

angelofsky1980 · Nov 10, 2012

Da quanto visto nella configurazione del kernel e nella BH, il tuo dispositivo risulta essere già compreso tra quelli supportati.
Ho bisogno dell'output completo del comando "dmesg" con il dispositivo USB DVB collegato e box appena riavviato.

stich86 · Nov 11, 2012

angelofsky1980 said:
Da quanto visto nella configurazione del kernel e nella BH, il tuo dispositivo risulta essere già compreso tra quelli supportati.
Ho bisogno dell'output completo del comando "dmesg" con il dispositivo USB DVB collegato e box appena riavviato.

ecco a te.. spento tutto, attaccata la scheda e riacceso, ma nada :\

Vuplus 2.2.0 + BlackHole 1.7.8 vuuno

vuuno login: root
Password:
root@vuuno:~# dmesg
Linux version 3.1.1 (amedeo@localhost.localdomain) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Sep 24 08:44:00 CEST 2012
Fetching vars from bootloader... found 11 vars.
Early serial console at MMIO32 0x10400b00 (options '115200n8')
bootconsole [uart0] enabled
Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 pci=1 smp=1 moca=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
bootconsole [early0] enabled
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 17 MB LINUX region at 6 MB (0x01139000@0x006c7000)
bmem: adding 232 MB RESERVED region at 24 MB (0x0e800000@0x01800000)
bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00030000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x00010000
0: 0x00020000 -> 0x00030000
On node 0 totalpages: 131072
Normal zone: 1536 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 129536 pages, LIFO batch:31
PERCPU: Embedded 7 pages/cpu @81407000 s4384 r8192 d16096 u32768
pcpu-alloc: s4384 r8192 d16096 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
Memory: 275196k/524288k available (5436k kernel code, 249092k reserved, 1135k data, 244k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
SMP: CPU1 is running
Brought up 2 CPUs
NET: Registered protocol family 16
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
pci 0000:01:00.0: [14e4:8602] type 0 class 0x000101
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 5: set to [mem 0x10510000-0x10510fff] (PCI address [0x10510000-0x10510fff])
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 32
Registering unionfs 2.5.11 (for 3.1.10)
NTFS driver 2.1.30 [Flags: R/W].
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 537
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
sata_brcmstb 0000:01:00.0: version 4.0
brcm-pm: enabling sata clocks
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 0000:01:00.0 to 64
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1d:ec:02:ef:20)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
brcm-pm: enabling usb clocks
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata1: SATA link down (SStatus 4 SControl 300)
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Success! Registering the characther device success with 0
blackhole initialised
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
EBI CS0: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Block size=00020000, erase shift=17
NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0
usb 1-1: new high speed USB device number 2 using ehci-brcm

Found NAND on CS0: ACC=f7ff1010, cfg=15142200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0302 128MB @00000000
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
Creating 8 MTD partitions on "brcmnand.0":
0x000000000000-0x000007200000 : "rootfs"
0x000007200000-0x000007600000 : "kernel"
0x000007600000-0x000007a00000 : "boot"
0x000007a00000-0x000007c00000 : "splash"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
usb 1-2: new high speed USB device number 3 using ehci-brcm
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number: 455
UBI: attached mtd0 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 114 MiB
UBI: number of good PEBs: 912
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 912
UBI: number of PEBs reserved for bad PEB handling: 9
UBI: max/mean erase counter: 3/0
UBI: image sequence number: 814929972
UBI: background thread "ubi_bgt0d" started, PID 46
UBIFS: parse sync
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 112754688 bytes (110112 KiB, 107 MiB, 888 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:12.
Freeing unused kernel memory: 244k freed
NET: Registered protocol family 10
rtw driver version=v3.4.3_4369.20120622
Build at: Sep 24 2012 08:58:46
usbcore: registered new interface driver rtl8192cu
procmk_init
dvb_bcm7413: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vuuno)
enable MII = 0
Booted !
NEXUS_Frontend_GetUserParameters 0 0
bcm7413: hotplug_callback():
Hotplug - status.connected 1
bcm7413: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
[GPIO]Default
[GPIO]RST Default
[GPIO]fpga secu
[GP]:brcm_pwm_init

brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: <6>bcm7335_video_init
[AUD]: <6>bcm7335_audio_init
DVB: registering adapter 0 frontend 0 (Vuplus FE)...
bcm7413: bcm7335_frontend_init(): vtuner1 : 2
[MPVR]: >> misc_pvr_init
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
[CI]:0 1

[CI]: registered ci0 0
[CI]: registered ci1 0
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4

[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
udevd (104): /proc/104/oom_adj is deprecated, please use /proc/104/oom_score_adj instead.
r8712u: module is from the staging directory, the quality is unknown, you have been warned.
r8712u: DriverVersion: v7_0.20100831
r8712u: register rtl8712_netdev_ops to netdev_ops
r8712u: USB_SPEED_HIGH with 4 endpoints
r8712u: Boot from EFUSE: Autoload OK
r8712u: CustomerID = 0x0000
r8712u: MAC Address from efuse = 00:1f:1f:a3:df:8b
usbcore: registered new interface driver r8712u
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
r8712u: 1 RCR=0x153f00e
r8712u: 2 RCR=0x553f00e
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
r8712u: [r8712_got_addbareq_event_callback] mac = 00:26:b0:fd:ff:41, seq = 0, tid = 0
bcmemac: eth0 NIC Link is Down
wlan0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
svc: failed to register lockdv1 RPC service (errno 124).
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[LCD]: unknown cmd 0x1015
[CI]:ci_dev_open

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

root@vuuno:~#

non mi sembra che se la fili molto, ho provato si sull'USB davanti che quella dietro (una è già occupata dalla chiavetta wifi) ma nada

calcola cmq che questa scheda è abbastanza schizzinosa anche sotto un linux classico e necessita di un firmware che si carica dopo il modulo del kernel..
resto cmq in attesa per la prox settimana della Tevii S660 che a quanto ho capito è compatibile con questo box

se ti servono altre info dimmi pure, e grazie per l'aiuto!

angelofsky1980 · Nov 11, 2012

Il driver e il relativo firmware sono presenti nella immagine ....
Usi un hub USB?
Prova a toglierla, reinserirla e posta un nuovo "dmesg"....

stich86 · Nov 11, 2012

angelofsky1980 said:
Il driver e il relativo firmware sono presenti nella immagine ....
Usi un hub USB?
Prova a toglierla, reinserirla e posta un nuovo "dmesg"....

Ciao angelo, la scheda la ho collegata direttamente.. Prima alla porta dietro poi a quella anteriore ed il risultato del dmesg è sempre lo stesso

Inoltre facendo al prova di attacco/stacco a caldo, nel dmesg vedo solo il trigger dell'hub ehci dove viene inserita una nuova periferica ma non viene caricato il relativo driver (che se non erro se è come sulle altre distribuzioni dovrebbe essere dvb_s2_technisatusb o una cosa del genere)

da quanto ho capito, il kernel in questione mi sembra molto monolitico, in quanto nella /lib/modules non trovo moltissimi driver..sopratutto quello per le varie schede USB, correggimi se sbaglio

Grazie!

angelofsky1980 · Nov 11, 2012

stich86 said:
Ciao angelo, la scheda la ho collegata direttamente.. Prima alla porta dietro poi a quella anteriore ed il risultato del dmesg è sempre lo stesso
Inoltre facendo al prova di attacco/stacco a caldo, nel dmesg vedo solo il trigger dell'hub ehci dove viene inserita una nuova periferica ma non viene caricato il relativo driver (che se non erro se è come sulle altre distribuzioni dovrebbe essere dvb_s2_technisatusb o una cosa del genere)

da quanto ho capito, il kernel in questione mi sembra molto monolitico, in quanto nella /lib/modules non trovo moltissimi driver..sopratutto quello per le varie schede USB, correggimi se sbaglio

Grazie!

Sbagli

Questo è il contenuto dei driver del kernel di una BH 1.7.8 per Duo:

Code:

.
./fs
./fs/ext2
./fs/ext2/ext2.ko
./fs/fuse
./fs/fuse/fuse.ko
./fs/nfsd
./fs/nfsd/nfsd.ko
./fs/exportfs
./fs/exportfs/exportfs.ko
./net
./net/802
./net/802/stp.ko
./net/llc
./net/llc/llc.ko
./net/ipv6
./net/ipv6/ipv6.ko
./net/bridge
./net/bridge/bridge.ko
./net/mac80211
./net/mac80211/mac80211.ko
./drivers
./drivers/net
./drivers/net/slhc.ko
./drivers/net/ppp_async.ko
./drivers/net/tun.ko
./drivers/net/wireless
./drivers/net/wireless/ath
./drivers/net/wireless/ath/ath9k
./drivers/net/wireless/ath/ath9k/ath9k_common.ko
./drivers/net/wireless/ath/ath9k/ath9k_hw.ko
./drivers/net/wireless/ath/ath9k/ath9k_htc.ko
./drivers/net/wireless/ath/ath.ko
./drivers/net/wireless/ath/carl9170
./drivers/net/wireless/ath/carl9170/carl9170.ko
./drivers/net/wireless/hostap
./drivers/net/wireless/hostap/hostap.ko
./drivers/net/wireless/rtl818x
./drivers/net/wireless/rtl818x/rtl8187
./drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko
./drivers/net/wireless/rtlwifi
./drivers/net/wireless/rtlwifi/rtl8192c
./drivers/net/wireless/rtlwifi/rtl8192c/rtl8192c-common.ko
./drivers/net/wireless/rtlwifi/rtl8192cu
./drivers/net/wireless/rtlwifi/rtl8192cu/rtl8192cu.ko
./drivers/net/wireless/rtlwifi/rtlwifi.ko
./drivers/net/wireless/zd1211rw
./drivers/net/wireless/zd1211rw/zd1211rw.ko
./drivers/net/wireless/rt2x00
./drivers/net/wireless/rt2x00/rt73usb.ko
./drivers/net/wireless/rt2x00/rt2x00usb.ko
./drivers/net/wireless/rt2x00/rt2500usb.ko
./drivers/net/wireless/rt2x00/rt2x00lib.ko
./drivers/net/ppp_generic.ko
./drivers/net/ppp_synctty.ko
./drivers/net/ppp_deflate.ko
./drivers/mtd
./drivers/mtd/nand
./drivers/mtd/nand/nandsim.ko
./drivers/usb
./drivers/usb/serial
./drivers/usb/serial/usbserial.ko
./drivers/usb/serial/cp210x.ko
./drivers/usb/serial/pl2303.ko
./drivers/usb/serial/ftdi_sio.ko
./drivers/usb/storage
./drivers/usb/storage/uas.ko
./drivers/linux
./drivers/linux/drivers
./drivers/linux/drivers/misc
./drivers/linux/drivers/misc/altera-stapl
./drivers/linux/drivers/misc/altera-stapl/altera-stapl.ko
./drivers/linux/drivers/staging
./drivers/linux/drivers/staging/media
./drivers/linux/drivers/staging/media/as102
./drivers/linux/drivers/staging/media/as102/dvb-as102.ko
./drivers/media
./drivers/media/rc
./drivers/media/rc/bh-rc-core.ko
./drivers/media/i2c
./drivers/media/i2c/cx2341x.ko
./drivers/media/i2c/tveeprom.ko
./drivers/media/i2c/saa7115.ko
./drivers/media/i2c/msp3400.ko
./drivers/media/i2c/tvp5150.ko
./drivers/media/i2c/mt9v011.ko
./drivers/media/i2c/ir-kbd-i2c.ko
./drivers/media/pci
./drivers/media/pci/ttpci
./drivers/media/pci/ttpci/ttpci-eeprom.ko
./drivers/media/usb
./drivers/media/usb/dvb-usb
./drivers/media/usb/dvb-usb/dvb-usb-dibusb-common.ko
./drivers/media/usb/dvb-usb/dvb-usb-dw2102.ko
./drivers/media/usb/dvb-usb/dvb-usb-cxusb.ko
./drivers/media/usb/dvb-usb/dvb-usb-friio.ko
./drivers/media/usb/dvb-usb/dvb-usb-af9005.ko
./drivers/media/usb/dvb-usb/dvb-usb-dib0700.ko
./drivers/media/usb/dvb-usb/dvb-usb-dibusb-mb.ko
./drivers/media/usb/dvb-usb/dvb-usb-dibusb-mc.ko
./drivers/media/usb/dvb-usb/dvb-usb-opera.ko
./drivers/media/usb/dvb-usb/dvb-usb-gp8psk.ko
./drivers/media/usb/dvb-usb/dvb-usb-dtv5100.ko
./drivers/media/usb/dvb-usb/dvb-usb-digitv.ko
./drivers/media/usb/dvb-usb/dvb-usb-ttusb2.ko
./drivers/media/usb/dvb-usb/dvb-usb-a800.ko
./drivers/media/usb/dvb-usb/dvb-usb-m920x.ko
./drivers/media/usb/dvb-usb/dvb-usb-cinergyT2.ko
./drivers/media/usb/dvb-usb/dvb-usb-vp7045.ko
./drivers/media/usb/dvb-usb/dvb-usb-vp702x.ko
./drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko
./drivers/media/usb/dvb-usb/dvb-usb.ko
./drivers/media/usb/dvb-usb/dvb-usb-az6027.ko
./drivers/media/usb/dvb-usb/dvb-usb-technisat-usb2.ko
./drivers/media/usb/dvb-usb/dvb-usb-pctv452e.ko
./drivers/media/usb/dvb-usb/dvb-usb-umt-010.ko
./drivers/media/usb/dvb-usb/dvb-usb-dtt200u.ko
./drivers/media/usb/b2c2
./drivers/media/usb/b2c2/b2c2-flexcop-usb.ko
./drivers/media/usb/cx231xx
./drivers/media/usb/cx231xx/cx231xx.ko
./drivers/media/usb/cx231xx/cx231xx-dvb.ko
./drivers/media/usb/siano
./drivers/media/usb/siano/smsusb.ko
./drivers/media/usb/ttusb-budget
./drivers/media/usb/ttusb-budget/dvb-ttusb-budget.ko
./drivers/media/usb/tm6000
./drivers/media/usb/tm6000/tm6000-dvb.ko
./drivers/media/usb/tm6000/tm6000.ko
./drivers/media/usb/dvb-usb-v2
./drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.ko
./drivers/media/usb/dvb-usb-v2/mxl111sf-demod.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-mxl111sf.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-au6610.ko
./drivers/media/usb/dvb-usb-v2/dvb_usb_cypress_firmware.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-gl861.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-af9015.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-af9035.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-it913x.ko
./drivers/media/usb/dvb-usb-v2/dvb_usbv2.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-anysee.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-rtl28xxu.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-lmedm04.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-az6007.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-ce6230.ko
./drivers/media/usb/dvb-usb-v2/dvb-usb-ec168.ko
./drivers/media/usb/em28xx
./drivers/media/usb/em28xx/em28xx-rc.ko
./drivers/media/usb/em28xx/em28xx.ko
./drivers/media/usb/em28xx/em28xx-dvb.ko
./drivers/media/usb/ttusb-dec
./drivers/media/usb/ttusb-dec/ttusbdecfe.ko
./drivers/media/usb/ttusb-dec/ttusb_dec.ko
./drivers/media/v4l2-core
./drivers/media/v4l2-core/videobuf-dvb.ko
./drivers/media/v4l2-core/videobuf-vmalloc.ko
./drivers/media/v4l2-core/bh-videodev.ko
./drivers/media/v4l2-core/tuner.ko
./drivers/media/v4l2-core/v4l2-int-device.ko
./drivers/media/v4l2-core/bh-v4l2-common.ko
./drivers/media/v4l2-core/videobuf-core.ko
./drivers/media/dvb-core
./drivers/media/dvb-core/bh-dvb-core.ko
./drivers/media/dvb-frontends
./drivers/media/dvb-frontends/atbm8830.ko
./drivers/media/dvb-frontends/cxd2820r.ko
./drivers/media/dvb-frontends/ix2505v.ko
./drivers/media/dvb-frontends/ec100.ko
./drivers/media/dvb-frontends/lg2160.ko
./drivers/media/dvb-frontends/lnbp21.ko
./drivers/media/dvb-frontends/lnbp22.ko
./drivers/media/dvb-frontends/dib8000.ko
./drivers/media/dvb-frontends/bcm3510.ko
./drivers/media/dvb-frontends/isl6421.ko
./drivers/media/dvb-frontends/isl6423.ko
./drivers/media/dvb-frontends/mt312.ko
./drivers/media/dvb-frontends/dibx000_common.ko
./drivers/media/dvb-frontends/s921.ko
./drivers/media/dvb-frontends/itd1000.ko
./drivers/media/dvb-frontends/mt352.ko
./drivers/media/dvb-frontends/tda18271c2dd.ko
./drivers/media/dvb-frontends/zl10039.ko
./drivers/media/dvb-frontends/dib7000m.ko
./drivers/media/dvb-frontends/dib7000p.ko
./drivers/media/dvb-frontends/dvb-pll.ko
./drivers/media/dvb-frontends/stv6110x.ko
./drivers/media/dvb-frontends/tda10023.ko
./drivers/media/dvb-frontends/tda10071.ko
./drivers/media/dvb-frontends/tda10086.ko
./drivers/media/dvb-frontends/tda1004x.ko
./drivers/media/dvb-frontends/stv0288.ko
./drivers/media/dvb-frontends/stv0297.ko
./drivers/media/dvb-frontends/stv0299.ko
./drivers/media/dvb-frontends/ds3000.ko
./drivers/media/dvb-frontends/m88rs2000.ko
./drivers/media/dvb-frontends/zl10353.ko
./drivers/media/dvb-frontends/si21xx.ko
./drivers/media/dvb-frontends/nxt200x.ko
./drivers/media/dvb-frontends/cx24113.ko
./drivers/media/dvb-frontends/cx24116.ko
./drivers/media/dvb-frontends/cx24123.ko
./drivers/media/dvb-frontends/dib0070.ko
./drivers/media/dvb-frontends/s5h1411.ko
./drivers/media/dvb-frontends/s5h1420.ko
./drivers/media/dvb-frontends/a8293.ko
./drivers/media/dvb-frontends/dib0090.ko
./drivers/media/dvb-frontends/stb0899.ko
./drivers/media/dvb-frontends/it913x-fe.ko
./drivers/media/dvb-frontends/stb6000.ko
./drivers/media/dvb-frontends/rtl2830.ko
./drivers/media/dvb-frontends/rtl2832.ko
./drivers/media/dvb-frontends/ves1820.ko
./drivers/media/dvb-frontends/lgdt3305.ko
./drivers/media/dvb-frontends/stb6100.ko
./drivers/media/dvb-frontends/cx22700.ko
./drivers/media/dvb-frontends/cx22702.ko
./drivers/media/dvb-frontends/tda8083.ko
./drivers/media/dvb-frontends/af9013.ko
./drivers/media/dvb-frontends/af9033.ko
./drivers/media/dvb-frontends/lgdt330x.ko
./drivers/media/dvb-frontends/stv0900.ko
./drivers/media/dvb-frontends/tda826x.ko
./drivers/media/dvb-frontends/stv090x.ko
./drivers/media/dvb-frontends/nxt6000.ko
./drivers/media/dvb-frontends/dib3000mb.ko
./drivers/media/dvb-frontends/dib3000mc.ko
./drivers/media/dvb-frontends/stv6110.ko
./drivers/media/dvb-frontends/drxd.ko
./drivers/media/dvb-frontends/drxk.ko
./drivers/media/dvb-frontends/lgs8gxx.ko
./drivers/media/tuners
./drivers/media/tuners/mt20xx.ko
./drivers/media/tuners/mxl5005s.ko
./drivers/media/tuners/mxl5007t.ko
./drivers/media/tuners/tda18212.ko
./drivers/media/tuners/tda18218.ko
./drivers/media/tuners/tda18271.ko
./drivers/media/tuners/tua9001.ko
./drivers/media/tuners/xc4000.ko
./drivers/media/tuners/tuner-xc2028.ko
./drivers/media/tuners/tuner-simple.ko
./drivers/media/tuners/max2165.ko
./drivers/media/tuners/mc44s803.ko
./drivers/media/tuners/qt1010.ko
./drivers/media/tuners/fc0011.ko
./drivers/media/tuners/fc0012.ko
./drivers/media/tuners/fc0013.ko
./drivers/media/tuners/tda9887.ko
./drivers/media/tuners/mt2060.ko
./drivers/media/tuners/mt2063.ko
./drivers/media/tuners/tuner-types.ko
./drivers/media/tuners/tda8290.ko
./drivers/media/tuners/tda827x.ko
./drivers/media/tuners/xc5000.ko
./drivers/media/tuners/mt2266.ko
./drivers/media/common
./drivers/media/common/b2c2
./drivers/media/common/b2c2/b2c2-flexcop.ko
./drivers/media/common/siano
./drivers/media/common/siano/smsmdtv.ko
./drivers/media/common/siano/smsdvb.ko
./drivers/staging
./drivers/staging/rtl8712
./drivers/staging/rtl8712/r8712u.ko
./drivers/staging/winbond
./drivers/staging/winbond/w35und.ko
./drivers/staging/wlan-ng
./drivers/staging/wlan-ng/prism2_usb.ko
./drivers/staging/rtl8192u
./drivers/staging/rtl8192u/r8192u_usb.ko

...e i driver DVB USB sono localizzati in drivers/media ... e ce ne sono una bella quantità, compreso il dvb-usb-technisat-usb2.ko che è quello che dovrebbe gestire il tuo dispositivo.

stich86 · Nov 12, 2012

allora houston abbiamo un problema.. perchè anche facendo una find non trovo tutta quella roba.. :confused:

ho come l'impressione che l'immagine non si sia installata tanto bene....
stasera riprovo a smanettarci e ti faccio sapere

stich86 · Nov 13, 2012

allora, per la technisat ieri non sono riuscito più a provare, però mi è arrivata l'S660 che ha riconosciuto subito
il problema è che anche impostando la S660 come primaria (priorità 2 contro 1 del tuner integrato) vedo dei canali (ad Es Italia 1), ma appena vado su un canale cryptato e torno su quello FTA non vedo più nulla

e' normale? forse ho configurato male qualcosa...

stich86 · Nov 13, 2012

dunque.. ho news

allora attaccando la scheda a caldo e forzano un modprobe del modulo ottengo ciò:

technisat-usb2: set alternate setting
technisat-usb2: firmware version: 17.63
dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technisat SkyStar USB HD (DVB-S/S2))
dvb-usb: MAC address: 00:08:c9:f0:95:6d
stv6110x_attach: Attaching STV6110x
technisat-usb2: i2c-error: 60 = 7
DVB: registering adapter 1 frontend 0 (Technisat SkyStar USB HD (DVB-S/S2))...
IR keymap rc-technisat-usb2 not found
Registered IR keymap rc-empty
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/bh-rc/rc0/input1
rc0: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/bh-rc/rc0
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: Technisat SkyStar USB HD (DVB-S/S2) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_technisat_usb2

quindi il driver viene caricato e la periferica idem, peccato che la GUI non vede la scheda..
noto però che il driver non si carica in automatico quando si fa l'hotplug, quindi penso ci sia qualcosa che manca nel driver stesso (magari l'VID o PID non sono proprio uguali?)

che dici angelo?

se ti serve altro dimmi pure

angelofsky1980 · Nov 14, 2012

stich86 said:
dunque.. ho news
allora attaccando la scheda a caldo e forzano un modprobe del modulo ottengo ciò:

quindi il driver viene caricato e la periferica idem, peccato che la GUI non vede la scheda..
noto però che il driver non si carica in automatico quando si fa l'hotplug, quindi penso ci sia qualcosa che manca nel driver stesso (magari l'VID o PID non sono proprio uguali?)

che dici angelo?

se ti serve altro dimmi pure

Allora... Se mancavano gli id non avrebbe rilevato il de vice...
Devo guardare come viene effettuato il caricamento dei driver...

Inviato dal mio iPad con Tapatalk HD

stich86 · Nov 14, 2012

angelofsky1980 said:
Allora... Se mancavano gli id non avrebbe rilevato il de vice...
Devo guardare come viene effettuato il caricamento dei driver...

Inviato dal mio iPad con Tapatalk HD

si effettivamente perdonami, ho detto una castroneria ^_^
cmq come ti dicevo lo fa anche su un linux normalissimo (Ubuntu ad esempio o Debian), devo forzargli io il caricamento del modulo..
quindi non sò se è proprio all'interno del modulo stesso che c'è qualcosa che non va :\

angelofsky1980 · Nov 14, 2012

stich86 said:
si effettivamente perdonami, ho detto una castroneria ^_^
cmq come ti dicevo lo fa anche su un linux normalissimo (Ubuntu ad esempio o Debian), devo forzargli io il caricamento del modulo..
quindi non sò se è proprio all'interno del modulo stesso che c'è qualcosa che non va :\

Ora sono ancora in viaggio per lavoro ma appena rientro a casa verifico

Inviato dal mio iPad con Tapatalk HD

VU+ BH 1.7.8 e Technisat USB

Vu+ Newbie

BH Lover

Vu+ Newbie

BlackHole Driver Specialist

Vu+ Newbie

BlackHole Driver Specialist

Vu+ Newbie

Vu+ Newbie

BlackHole Driver Specialist

BlackHole Driver Specialist

Vu+ Newbie

BlackHole Driver Specialist

Vu+ Newbie

BlackHole Driver Specialist

Vu+ Newbie

Vu+ Newbie

Vu+ Newbie

BlackHole Driver Specialist

Vu+ Newbie

BlackHole Driver Specialist