Vu Solo is not able to flash

[mardoka]

Hi,
I used wrong flash file (duo_cfe_3_0_usb) for my VU+ SOLO. Now I not able to use correct reflash cfe_solo_2.0.zip. My VU+ SOLO not able to read USB during start. Have a some idea?
Thanks.

 

[sidTM]

Hi,
I used wrong flash file (duo_cfe_3_0_usb) for my VU+ SOLO. Now I not able to use correct reflash cfe_solo_2.0.zip. My VU+ SOLO not able to read USB during start. Have a some idea?
Thanks.

Hello

Since you have used a duo bootloader flash on a solo I'm sure there is nothing you can do about it, think you may need to buy a new box I'm afraid

Maybe someone in the community can confirm this please?

 

[paolino]

Only J-TAG could help.

 

[angelofsky1980]

Hi,
I used wrong flash file (duo_cfe_3_0_usb) for my VU+ SOLO. Now I not able to use correct reflash cfe_solo_2.0.zip. My VU+ SOLO not able to read USB during start. Have a some idea?
Thanks.

Other members have answered to your question.
You have tried the CFE bootloader on Solo box and you have bricked them. JTAG or contact your seller for replacement.

 

[mardoka]

Thank. Could I put new image into solo via RS232 (serial interface)?

 

[angelofsky1980]

Thank. Could I put new image into solo via RS232 (serial interface)?

No because serial interface talk with box via CFE.

 

[mardoka]

Thx for answer. May I "reset or set" on mainboard with some pin. Something like as if is it a new in factory . Example start communication via some interface.

 

[angelofsky1980]

Thx for answer. May I "reset or set" on mainboard with some pin. Something like as if is it a new in factory . Example start communication via some interface.

There are some experimental studies on the web to recover bad flashed boxes like your via JTAG but I've not yet tested it