Diseqc Swtich 10x 1 With Vu Duo 2

[kakultube]

Can we Use 10x1 programmable DiseqC switch with VU Duo 2 Recivcer casue i Saw only 4 Port in Diseqc Switch Settings

Fully DiSEqC 1.0, 1.1, 1.2, 2.0, 2.1, 2.2 compliant
Multiprotocol programmable
For switching between 10 Satellites
Frequency Range: 950~2150MHz
Insertion Loss: 3dB
Power Passing: 500mA (max)
For outdoor usage

 

[a911]

@ Mode Use LNB1 ,LNB2 ,LNB3,,,,etc!

 

[kakultube]

@ Mode Use LNB1 ,LNB2 ,LNB3,,,,etc!

Thanks You I Saw That Settings But Never Sure about that cause i never use diseqc switch more then 1x4
are You Agreed with Those setting dude

 

[a911]

Thanks You I Saw That Settings But Never Sure about that cause i never use diseqc switch more then 1x4
are You AgreedView attachment 15166 with Those setting dude

Personally, I never tried more than 3 LNBs, try few settings till you reach what U looking for dude...

 

[kakultube]

Yes Bro I already Put 16X1 Diseqc and its just working fine . and retailer told me that i can add 32 LNB on Single Tuner .. ( 2 x 1x16 Diseqc Switch with 2 Way Combiner )

Retailer Source Says
VU Duo 2
1 Tuner = 32 LNB
4 Tuners = 128 LNBS

 

[lousat]

hi bro i saw the settings more up but i try to understand where is my mistake.i try to connect diseqc switch 10x1 in vusolo pro.i make the comand as i saw more up but somethink is wrong and not working.the committed diseqc comand must be input16 or somethink else?

 

[Mick12334]

There is no such official receiver, as a VU+ Solo pro:
Official VU+ Models:
VU+ Solo 4K
VU+ Duo 2
VU+ Solo 2
VU+ Solo SE
VU+ Zero
VU+ Duo
VU= Solo
VU+ Ultimo
VU+ Uno

Please confirm your model as the forum doesn't support clones.

 

[lousat]

vu+ uno

 

[lousat]

vu+ uno

hardware write:vusolo(1400E8)

 

[lousat]

There is no such official receiver, as a VU+ Solo pro:
Official VU+ Models:
VU+ Solo 4K
VU+ Duo 2
VU+ Solo 2
VU+ Solo SE
VU+ Zero
VU+ Duo
VU= Solo
VU+ Ultimo
VU+ Uno

Please confirm your model as the forum doesn't support clones.

vu=solo

 

[Mick12334]

When configuring a Diseqc switch, with more than 4 connections, tou need to use the advanced options, in the tuner setup, and match the relevant diseqc port, to the information entered, using Diseqc 1.1.
It will be trial, and error, to get it working.

 

[Steffan]

Use, Advanced settings/ uncommitet/ Diseqc 1.1/ Lnb1, Lnb2, Lnb3 etc....I used this settings for a long time on different images and Dreamboxes, Vu+Duo, VuDuo2 and also cloned VuSoloPro....working all the time...

 

[lousat]

Use, Advanced settings/ uncommitet/ Diseqc 1.1/ Lnb1, Lnb2, Lnb3 etc....I used this settings for a long time on different images and Dreamboxes, Vu+Duo, VuDuo2 and also cloned VuSoloPro....working all the time...

i make it in tuner conf advance settings but i cannot find uncommitet where is write maybe i dodnt have this in the menu here.in advance conf the 3rt line write Lnb i put 1 in the diseqc 1.1 command i put Lnb1 or something else?at diseqc 1.0 and toneburst what i put?i cannot find uncommitet where is.

 

[lousat]

i make it in tuner conf advance settings but i cannot find uncommitet where is write maybe i dodnt have this in the menu here.in advance conf the 3rt line write Lnb i put 1 in the diseqc 1.1 command i put Lnb1 or something else?at diseqc 1.0 and toneburst what i put?i cannot find uncommitet where is.

is it possible to dodnt have uncommitet in the screen?

 

[Mick12334]

What image do you have loaded, on your receiver?

 

[lousat]

What image do you have loaded, on your receiver?

open pli 4

 

[Steffan]

i make it in tuner conf advance settings but i cannot find uncommitet where is write maybe i dodnt have this in the menu here.in advance conf the 3rt line write Lnb i put 1 in the diseqc 1.1 command i put Lnb1 or something else?at diseqc 1.0 and toneburst what i put?i cannot find uncommitet where is.

Sorry my mistake. OpenPli4 ( and OpenBlackHole) uses different "picture"...but you are on the right track...

Advanced
Sat name - (ex Hotbird)
Lnb - Lnb1 (or 2 etc..for other 8 sats)
xxx- Auto
Lof - Universal Lnb
xxx - polarisation
xxx - No
xxx - Band
xxx - 1.1
Fast DiseqC - No
Toneburst - None
DiseqC 1.0 - None
DiseqC 1.1 - Input 1 (or 2 etc..for other 8 sats)
DiseqC 1.1 repeats - None
xxx - No

 

[lousat]

Sorry my mistake. OpenPli4 ( and OpenBlackHole) uses different "picture"...but you are on the right track...

Advanced
Sat name - (ex Hotbird)
Lnb - Lnb1 (or 2 etc..for other 8 sats)
xxx- Auto
Lof - Universal Lnb
xxx - polarisation
xxx - No
xxx - Band
xxx - 1.1
Fast DiseqC - No
Toneburst - None
DiseqC 1.0 - None
DiseqC 1.1 - Input 1 (or 2 etc..for other 8 sats)
DiseqC 1.1 repeats - None
xxx - No

where i have to put commitet uncommitet and toneburst or nowhere?

 

[Steffan]

Nowhere on this image, just put the settings I wrote. Somehow it works without commitet or uncommitted

 

[lousat]

Nowhere on this image, just put the settings I wrote. Somehow it works without commitet or uncommitted

thank you very much brother are working all very good,excelent thanks a lot.