Need some help w/WLAN adapter

MSNBC

MSNBC

Vu+ Newbie
Greetings, sorry for bothering you guys but during I brief stay in my parents home I have to get a Solo² connecting to the Internet.

Open Black Hole 4.3.009 (installed all updates as of today using a LAN cable)

I have a D-Link DWA-125 Wireless N 150 USB-Adapter (Rev. A3) here.

I installed a bunch of drivers network-usb-r***** and network-usb-rt****

What do I do next?
 
MSNBC

MSNBC

Vu+ Newbie
This is What my Notebook Linux has to say...

51: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: Uc5H.VcTDYmemrUD
Parent ID: k4bc.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0
SysFS BusID: 1-4:1.0
Hardware Class: network
Model: "D-Link DWA-125 Wireless N 150 Adapter(rev.A3) [Ralink RT5370]"
Hotplug: USB
Vendor: usb 0x2001 "D-Link"
Device: usb 0x3c19 "DWA-125 Wireless N 150 Adapter(rev.A3) [Ralink RT5370]"
Revision: "1.01"
Serial ID: "1.0"
Driver: "rt2800usb"
Driver Modules: "rt2800usb"
Device File: wlxb8a386902aa9
Features: WLAN
Speed: 480 Mbps
HW Address: b8:a3:86:90:2a:a9
Permanent HW Address: b8:a3:86:90:2a:a9
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v2001p3C19d0101dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: rt2800usb is active
Driver Activation Cmd: "modprobe rt2800usb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #50 (Hub)
 
MSNBC

MSNBC

Vu+ Newbie
Observation: when connected to my Notebook the LED blinks. When connected to Solo² it doesn't...
 
You must log in or register to reply here.
Top