Hello,
I owned these two keys (especially for sdr) : Terratec Tstick+ (rtl2832u+e4000) and august T205 (rtl2832u+fc0012 or 13)
With latest v4l compiled (http://git.linuxtv.org/media_build.git) drivers, they work on my ubuntu.
Is it possible to have them working on my vu uno (bh2.0.3) working ?
I compiled the recipe (bitbake vuplus-dvb-modules) but the drivers are not included, is there a way to take the drivers from v4l and have them compile into openvuplus (i'm a beginner) ?
Thanks in advance.
Just a tip that i observed on my vuuno, with an extension usb cable on my key (elgato dtt v2) i have no more BER errors. Without it, a lot of BERs...
The info for my keys:
August T205:
lsusb command
Bus 001 Device 002: ID 1f4d:a803 G-Tek Electronics Group
lsmod command:
fc0013 17619 1
rtl2832 13647 1
dvb_usb_rtl28xxu 23888 0
rtl2830 17871 1 dvb_usb_rtl28xxu
dvb_usb_v2 23940 1 dvb_usb_rtl28xxu
dvb_core 106020 3 rtl2830,rtl2832,dvb_usb_v2
and dmesg command :
[ 15.039626] DVB: registering new adapter (Crypto ReDi PC 50 A)
[ 15.054367] usb 1-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 15.067393] fc0013: Fitipower FC0013 successfully attached.
[ 15.108718] Registered IR keymap rc-empty
[ 15.108809] input: Crypto ReDi PC 50 A as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc0/input6
[ 15.108888] rc0: Crypto ReDi PC 50 A as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc0
[ 15.118688] usb 1-1: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 15.121971] IR NEC protocol handler initialized
[ 15.123234] IR JVC protocol handler initialized
[ 15.123739] IR Sony protocol handler initialized
[ 15.124271] IR SANYO protocol handler initialized
[ 15.124817] IR RC6 protocol handler initialized
[ 15.125460] IR RC5(x) protocol handler initialized
[ 15.127422] lirc_dev: IR Remote Control driver registered, major 250
[ 15.128693] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input7
[ 15.128874] IR MCE Keyboard/mouse protocol handler initialized
[ 15.135803] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 15.135810] IR LIRC bridge handler initialized
[ 15.160873] usb 1-1: dvb_usb_v2: 'Crypto ReDi PC 50 A' successfully initialized and connected
For the terratec TStick+:
lsusb command:
Bus 001 Device 003: ID 0ccd:00d7 TerraTec Electronic GmbH
lsmod command:
e4000 13006 1
nls_utf8 12557 1
isofs 39815 1
ir_lirc_codec 12859 0
lirc_dev 19166 1 ir_lirc_codec
ir_mce_kbd_decoder 12723 0
ir_rc5_decoder 12507 0
ir_sanyo_decoder 12513 0
ir_sony_decoder 12510 0
ir_jvc_decoder 12507 0
ir_rc6_decoder 12507 0
ir_nec_decoder 12507 0
fc0013 17619 0
rtl2832 13647 1
dvb_usb_rtl28xxu 23888 0
rtl2830 17871 1 dvb_usb_rtl28xxu
dvb_usb_v2 23940 1 dvb_usb_rtl28xxu
dvb_core 106020 3 rtl2830,rtl2832,dvb_usb_v2
and dmesg:
usb 1-1: dvb_usb_v2: 'Crypto ReDi PC 50 A' successfully deinitialized and disconnected
[ 1431.012134] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 1431.295924] usb 1-1: New USB device found, idVendor=0ccd, idProduct=00d7
[ 1431.295930] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1431.295934] usb 1-1: Product: RTL2838UHIDIR
[ 1431.295939] usb 1-1: Manufacturer: Realtek
[ 1431.295943] usb 1-1: SerialNumber: 00000001
[ 1431.435245] usb 1-1: dvb_usb_v2: found a 'TerraTec Cinergy T Stick+' in warm state
[ 1431.582024] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 1431.582041] DVB: registering new adapter (TerraTec Cinergy T Stick+)
[ 1431.588293] usb 1-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 1431.743835] i2c i2c-0: e4000: Elonics E4000 successfully identified
[ 1431.773115] Registered IR keymap rc-empty
[ 1431.773237] input: TerraTec Cinergy T Stick+ as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc1/input8
[ 1431.773495] rc1: TerraTec Cinergy T Stick+ as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc1
[ 1431.773637] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input9
[ 1431.774608] rc rc1: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 1431.774615] usb 1-1: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 1431.810513] usb 1-1: dvb_usb_v2: 'TerraTec Cinergy T Stick+' successfully initialized and connected
I owned these two keys (especially for sdr) : Terratec Tstick+ (rtl2832u+e4000) and august T205 (rtl2832u+fc0012 or 13)
With latest v4l compiled (http://git.linuxtv.org/media_build.git) drivers, they work on my ubuntu.
Is it possible to have them working on my vu uno (bh2.0.3) working ?
I compiled the recipe (bitbake vuplus-dvb-modules) but the drivers are not included, is there a way to take the drivers from v4l and have them compile into openvuplus (i'm a beginner) ?
Thanks in advance.
Just a tip that i observed on my vuuno, with an extension usb cable on my key (elgato dtt v2) i have no more BER errors. Without it, a lot of BERs...
The info for my keys:
August T205:
lsusb command
Bus 001 Device 002: ID 1f4d:a803 G-Tek Electronics Group
lsmod command:
fc0013 17619 1
rtl2832 13647 1
dvb_usb_rtl28xxu 23888 0
rtl2830 17871 1 dvb_usb_rtl28xxu
dvb_usb_v2 23940 1 dvb_usb_rtl28xxu
dvb_core 106020 3 rtl2830,rtl2832,dvb_usb_v2
and dmesg command :
[ 15.039626] DVB: registering new adapter (Crypto ReDi PC 50 A)
[ 15.054367] usb 1-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 15.067393] fc0013: Fitipower FC0013 successfully attached.
[ 15.108718] Registered IR keymap rc-empty
[ 15.108809] input: Crypto ReDi PC 50 A as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc0/input6
[ 15.108888] rc0: Crypto ReDi PC 50 A as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc0
[ 15.118688] usb 1-1: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 15.121971] IR NEC protocol handler initialized
[ 15.123234] IR JVC protocol handler initialized
[ 15.123739] IR Sony protocol handler initialized
[ 15.124271] IR SANYO protocol handler initialized
[ 15.124817] IR RC6 protocol handler initialized
[ 15.125460] IR RC5(x) protocol handler initialized
[ 15.127422] lirc_dev: IR Remote Control driver registered, major 250
[ 15.128693] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input7
[ 15.128874] IR MCE Keyboard/mouse protocol handler initialized
[ 15.135803] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 15.135810] IR LIRC bridge handler initialized
[ 15.160873] usb 1-1: dvb_usb_v2: 'Crypto ReDi PC 50 A' successfully initialized and connected
For the terratec TStick+:
lsusb command:
Bus 001 Device 003: ID 0ccd:00d7 TerraTec Electronic GmbH
lsmod command:
e4000 13006 1
nls_utf8 12557 1
isofs 39815 1
ir_lirc_codec 12859 0
lirc_dev 19166 1 ir_lirc_codec
ir_mce_kbd_decoder 12723 0
ir_rc5_decoder 12507 0
ir_sanyo_decoder 12513 0
ir_sony_decoder 12510 0
ir_jvc_decoder 12507 0
ir_rc6_decoder 12507 0
ir_nec_decoder 12507 0
fc0013 17619 0
rtl2832 13647 1
dvb_usb_rtl28xxu 23888 0
rtl2830 17871 1 dvb_usb_rtl28xxu
dvb_usb_v2 23940 1 dvb_usb_rtl28xxu
dvb_core 106020 3 rtl2830,rtl2832,dvb_usb_v2
and dmesg:
usb 1-1: dvb_usb_v2: 'Crypto ReDi PC 50 A' successfully deinitialized and disconnected
[ 1431.012134] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 1431.295924] usb 1-1: New USB device found, idVendor=0ccd, idProduct=00d7
[ 1431.295930] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1431.295934] usb 1-1: Product: RTL2838UHIDIR
[ 1431.295939] usb 1-1: Manufacturer: Realtek
[ 1431.295943] usb 1-1: SerialNumber: 00000001
[ 1431.435245] usb 1-1: dvb_usb_v2: found a 'TerraTec Cinergy T Stick+' in warm state
[ 1431.582024] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 1431.582041] DVB: registering new adapter (TerraTec Cinergy T Stick+)
[ 1431.588293] usb 1-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 1431.743835] i2c i2c-0: e4000: Elonics E4000 successfully identified
[ 1431.773115] Registered IR keymap rc-empty
[ 1431.773237] input: TerraTec Cinergy T Stick+ as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc1/input8
[ 1431.773495] rc1: TerraTec Cinergy T Stick+ as /devices/pci0000:00/0000:00:1f.5/usb1/1-1/rc/rc1
[ 1431.773637] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input9
[ 1431.774608] rc rc1: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 1431.774615] usb 1-1: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 1431.810513] usb 1-1: dvb_usb_v2: 'TerraTec Cinergy T Stick+' successfully initialized and connected