Panc88
Vu+ Newbie
Hello everyone,
I recently bought a VU + Uno (my first Linux-based STB) and being a Ubuntu user for many years I cannot wait to begin to shape it to my needs.
My ambitions abruptly met though with a tuner configuration problem.
I begin to describe my setup (forgive any inaccuracy): on the roof of the building there are 2 dishes, one with a single LNB (13 E) leading down to the multiswitch on my floor, a second with dual feed 19.2E and 23.5E, both cables leading to the same multiswitch, from which a single cable carries the signal to the decoder. On my old receiver MVision HD300 the tuner is configured as a diseqc A on 13E, diseqc C on 19.2E and diseqc D on 23.5E and and all channels are found. If I use the same settings on the UNO, non-advanced mode, everything ok for 13E and 19.2 E, but I found only about 14 channels on a single transponder on 23.5E. What do I do wrong?
I recently bought a VU + Uno (my first Linux-based STB) and being a Ubuntu user for many years I cannot wait to begin to shape it to my needs.
My ambitions abruptly met though with a tuner configuration problem.
I begin to describe my setup (forgive any inaccuracy): on the roof of the building there are 2 dishes, one with a single LNB (13 E) leading down to the multiswitch on my floor, a second with dual feed 19.2E and 23.5E, both cables leading to the same multiswitch, from which a single cable carries the signal to the decoder. On my old receiver MVision HD300 the tuner is configured as a diseqc A on 13E, diseqc C on 19.2E and diseqc D on 23.5E and and all channels are found. If I use the same settings on the UNO, non-advanced mode, everything ok for 13E and 19.2 E, but I found only about 14 channels on a single transponder on 23.5E. What do I do wrong?