Vu+ Zero 4K - a second USB

resident

Vu+ Newbie
Cool. Thanks.
1. How did You discover it? Can You open another secrets?
2. And what about other pins of this contact?
As I understand, they must contain 12V and GND?
 

gaga24

Vu+ Newbie
Im guessing ther is no 12V pins here, PVR kit is usb 2.0 external case with sata to usb converter. 2.5" SATA hdd will need 5V / 500-1000mA power, my guess is that other pins are not in use.
 

PaPs

Vu+ Newbie
Search for this type of plugin. Here are 24 pieces :)

Code:
https://m.ebay.co.uk/itm/24-Pcs-Dual-Row-10-Pin-Right-Angle-2-54mm-Box-Header-Connector-IDC-Male-Sockets/183144264811?_mwBanner=1&ul_ref=https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F183144264811&rvr_id=0&rvr_ts=14ff2ada1640a9cb2037d18afffbb254&ul_noapp=true
 
Last edited by a moderator:

nunigaia

Moderator
Search for this type of plugin. Here are 24 pieces :)

Code:
https://m.ebay.co.uk/itm/24-Pcs-Dual-Row-10-Pin-Right-Angle-2-54mm-Box-Header-Connector-IDC-Male-Sockets/183144264811?_mwBanner=1&ul_ref=https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F183144264811&rvr_id=0&rvr_ts=14ff2ada1640a9cb2037d18afffbb254&ul_noapp=true

Please pay attention, external live links are not allowed on our board,

best regards
nunigaia
 

resident

Vu+ Newbie
Can someone tell me the name of this 10pin connector? I wanna try to find it on ebay.
As I see all of Vu internal connectors are Amphenol FCI (formerly known as Mini-PV, FCI, Berg, DuPont) style connectors with 0.1inch (2.54mm pitch).
This pitch is standart and you can buy any connnectors.

1) You can buy ten "Dupont wire" and demount them for cripmped wires.
2) Insert them into "Dupont housing 2 10". (2 rows * 5 pins)
Housing.png

Wire1.png


OneRow.png
 

raboha

Vu+ Newbie
my zero 4k conect just with putty but i dont know what i do
____________________________
That's what the putty gave me
)))))))))))))))))))))))))))

▒CPU 01
BCM72600000
PRID07260400
v1.32
RR:00000003
BFW
seclib-1.11
BBL v3.1.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 1 0002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON
I2C @ f0417380.
BID: no ack!

single board
select_image: addr_offset: 00056000 part_offset: 00000000 bootStatus: 302b2500
MEMSYS-ALT
SHMOO 03040016 BLD:memsys_7260a_3.4.0.0_take2-39-gc791dfd02 HW:hpg0_b2p1 shmoo_v er:3.4.0.22
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=000003ec(1004)
temperature=0000926d(37485)
PV=00000359(857)
MV=000003f1(1009)
CPU: Current voltage=000003ef(1007)
temperature=0000926d(37485)
PV=0000034f(847)
MV=000003ef(1007)
AVS FW rev=30353078 [0.5.0.x]
OK
DDR0: !@ ffe07800 <= ffe06c70 MEMSYS-0 @ f1100000 OK
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 2025252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v4.2.3
INFO v00000003
COPY CODE... DONE
MICH: disable success
SSBL
SEC: jtag debug status: 000000af
PINMUX
CACHE FLUSH OK
CLR PSCI MEM @ 06400000 OK
INSTALL smm64@06400000 OK
MMU ON
CACHE FLUSH OK
_fbss 070661c0
_ebss 0706b558
_end 0706b578
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 070661c0 to 0706b558 OK
CLR SRAM OK
CACHE FLUSH OK
CPU CLKSET OK
GO!
PSCI: Init...
PSCI: config @ 0000000006402d00 cpus:2 cpu idx:0
cpu 0 state:5
cpu 1 state:0
PSCI: v0.2

,/
,'/___, BOLT v1.32 v1.32 LOCAL BUILD
.'__ ,' (2017-09-04 21:30:37 Vuplus team)
/,' Copyright (C) 2017 Broadcom
/'

Board: BCM972604USFF
SYS_CTRL: product=72604, family=7260a0, strap=0000019e,00000011
otp @ 0xf0404030 = 0x000000e0: en_cr(0x00000060) en_testport(0x00000080)
otp @ 0xf0404034 = 0x00804000: macrovision_disable(0x00800000) mtsif_enc_ctl_dis able(0x00004000)
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 24 possible causes)
RTS0: 0x21101004, 256 clients, ok
BOX MODE: 4
CPU: 2x B53 [420f1000] 1503 MHz
SCB: 388 MHz
SYSIF: 1002 MHz
DDR0 @ 1200MHz
SPLASH: starting
SPLASH BMEM init @ 7dffffff
SPLASH: Old format file in flash. Use splash_create_flash_file to create newer f ormat.
Loaded BMP: W=1920 H=1080


CPU exception: ABT
r0 : 00000000
r1 : 00000003
r2 : 80000258
r3 : 80000708
r4 : 7df56e50
r5 : 00001680
r6 : 00000000
r7 : 07a6f7ce
r8 : 87a6fed6
r9 : 00000000
r10 : 07055b04
r11 : 000001e0
r12 : 0706b108
r13 (sp): 091fbe78
r14 (lr): 07010336
r15 (pc): 0701032e
cpsr : 600001d3
dfsr : 00000005
dfar : 87a6fed6
ifar : 37dfc53f
 

Matrix10

Administrator
It's totally unclear what you want.
If you use a USB stick attached to the connector at the bottom of the box
and he does not work.
This means you did not connect the usb stick properly
If you use a USB to SATA Bridge Controller to connect a Hard Drive
this again means something is not well connected.

check with the voltmeter USB female connector voltages
as shown in the picture in post 1

or

with resistance meter (ohmmeter) connection between the two connectors
Box and USB Female Connector
the box must be switched off

check twice the connection between the box connector
and a USB Female Connector as shown in the picture.
 
Last edited:

raboha

Vu+ Newbie
I try running like that in the picture above
Because I did not operate the nerve outlet that was behind for the problem I attached to the writing and gave it to me putty
I want to re-pass an original image via putty
Or the new port usb
 

raboha

Vu+ Newbie
Yes I have a bad English speaking
my problme is i try to change splash_auto.bin to full hd
i put the image oepnt atv 6.2 in the usb, The update was passed normally
but when i rebot my zero 4k he was stoped Permanently jaust the led in frontal marched
i try to change all image but the USB port on the back does not work
i try working with rs232 end putty, But I do not know how to deal with it
 

Matrix10

Administrator
If you want to use telnet commands for status checking
then use this command on the link

https://linuxhint.com/list-usb-devices-linux/

It can also be used
device manager to see if the USB stick is detected (Black Hole image Blue button>>blue>>Device Manager)
==================================================
If the USB stick is detected
then you can use USB format Wizard to format USB stick ((Black Hole image Blue button>>blue>>USB Format Wizard)
and then mount in Device Manager
====================================================
If the USB stick is not detected
this means something is wrong with your hardware modification
or USB stick is defective.
 

raboha

Vu+ Newbie
there is no image on the device in order to find
Only the white signal is stopped
I mean I want a solution to deal with putty
 

Matrix10

Administrator
Yes I have a bad English speaking
my problme is i try to change splash_auto.bin to full hd
i put the image oepnt atv 6.2 in the usb, The update was passed normally
but when i rebot my zero 4k he was stoped Permanently jaust the led in frontal marched
i try to change all image but the USB port on the back does not work
i try working with rs232 end putty, But I do not know how to deal with it

How Much I Know splash_auto.bin Photo/image it can only be 720x480 size format
Which means you've put in the image wrong format
and now he is blocked.

You can not put/flash image with Putty in the box.
You must use a USB port.

The reason you can not,it can be a USB stick.
Which means you have to try different USB sticks.
Best older USB sticks 2 MB or 4Mb in size.
Of course you have to format USB stick on PC (FAT format)
and to correctly copy the image flash files.

You have to follow flash process on the receiver lamp.
 

Matrix10

Administrator
there is no image on the device in order to find
Only the white signal is stopped
I mean I want a solution to deal with putty

There is no Solution with Putty that I know.
The fact that you got into box the wrong splash_auto.bin
does not mean that box can no be longer flash via USB port
 
Top