questo al seguente avvio
BL=00000003
RC1=00000000
RC2=00000018
3
COPY CODE
AS567
CP16=80040483,BEA3519F,80000167
BCM97325B0 CFE v2.27, CFE core v2.12, Endian Mode: Little
Build Date: Thu Feb 18 20:58:28 2010 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
DDR Freq: 398MHz
CPU speed: 333MHz
Memory Config: 32-bit UMA
Device Tech: 1Gb
Total memory: 256MB
Total flash: 128MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
CFE initialized.
checking usb
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:rootfstype=jffs2 root=/de
v/mtdblock0 rw mem=0x8000000
Loading: !!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
Failed.
Could not load : I/O error
CFE>
BCM73250010
012
K1
K2
K3
K4
K5
Shmoo Version=3.6
DDR Freq=0x0000018E
%00000001%
RC1=00000005
WC1=FFFFFFF6
RC2=00000019
WC2=00000043
RC3=0000000F
WC3=FFFFFFF6
RC4=0000000F
WC4=00000043
NWC=0000001C
RC5=00000005
WC5=0000001C
RC6=00000018
WC6=0000001C
NRC=0000000E
RW=00000014
WW=0000004E
G=00000000 R=0000000E W=0000001C
BL=00000000
RC1=00000005
RC2=0000001B
BL=00000001
RC1=00000005
RC2=00000019
BL=00000002
RC1=00000002
RC2=0000001A
BL=00000003
RC1=00000000
RC2=00000019
3
COPY CODE
AS567
CP16=80040483,BEA3519F,80000167
BCM97325B0 CFE v2.27, CFE core v2.12, Endian Mode: Little
Build Date: Thu Feb 18 20:58:28 2010 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
DDR Freq: 398MHz
CPU speed: 333MHz
Memory Config: 32-bit UMA
Device Tech: 1Gb
Total memory: 256MB
Total flash: 128MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
CFE initialized.
USB: New device connected to bus 0 hub 1 port 1
USB: Resetting device on bus 0 port 1
USB: Locating Class 08 Vendor 0011 Product 7788: Mass-Storage Device
USBMASS: Unit 0 connected
checking usb
Reading usbdisk0:/vuplus/solo/cfe_cfe_auto.bin: >> Skipping...: File not found
Reading usbdisk0:/vuplus/solo/root_cfe_auto.jffs2: >> Skipping...: File not fou
nd
Reading usbdisk0:/vuplus/solo/boot_cfe_auto.jffs2: >> Skipping...: File not fou
nd
Reading usbdisk0:/vuplus/solo/kernel_cfe_auto.bin: >> Skipping...: File not fou
nd
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:rootfstype=jffs2 root=/de
v/mtdblock0 rw mem=0x8000000
Loading: !!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
Failed.
Could not load : I/O error
CFE>
BCM73250010
012
K1
K2
K3
K4
K5
Shmoo Version=3.6
DDR Freq=0x0000018E
%00000001%
RC1=00000005
WC1=FFFFFFF6
RC2=00000019
WC2=00000035
RC3=0000000F
WC3=FFFFFFF6
RC4=0000000F
WC4=0000003E
NWC=0000001A
RC5=00000005
WC5=0000001A
RC6=00000018
WC6=0000001A
NRC=0000000E
RW=00000014
WW=00000049
G=00000000 R=0000000E W=0000001A
BL=00000000
RC1=00000005
RC2=0000001A
BL=00000001
RC1=00000005
RC2=00000019
BL=00000002
RC1=00000002
RC2=0000001B
BL=00000003
RC1=00000000
RC2=00000018
3
COPY CODE
AS567
CP16=80040483,BEA3519F,80000167
BCM97325B0 CFE v2.27, CFE core v2.12, Endian Mode: Little
Build Date: Thu Feb 18 20:58:28 2010 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
DDR Freq: 398MHz
CPU speed: 333MHz
Memory Config: 32-bit UMA
Device Tech: 1Gb
Total memory: 256MB
Total flash: 128MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
CFE initialized.
USB: New device connected to bus 0 hub 1 port 1
USB: Resetting device on bus 0 port 1
USB: Locating Class 08 Vendor 0011 Product 7788: Mass-Storage Device
USBMASS: Unit 0 connected
checking usb
Reading usbdisk0:/vuplus/solo/cfe_cfe_auto.bin: >> Skipping...: File not found
Reading usbdisk0:/vuplus/solo/root_cfe_auto.jffs2: >> Done. 50213032 bytes read
========================================================================
nand_erase_block 0x19fa0000 0x20000 done
nand_erase_block skipping: at blk addr = 0x19fa0000
nand_erase_block 0x1b160000 0x20000 done
nand_erase_block skipping: at blk addr = 0x1b160000
========================================================================
Programming...
done. 50213032 bytes written0x20000 done
Reading usbdisk0:/vuplus/solo/boot_cfe_auto.jffs2: >> Done. 580 bytes read
========================================================================
========================================================================
Programming...
done. 580 bytes written0000 0x20000 done
Reading usbdisk0:/vuplus/solo/kernel_cfe_auto.bin: >> Done. 1641961 bytes read
Programming...
done. 1641961 bytes written 0x20000 done
please remove usb first and reboot
BCM73250010
012
K1
K2
K3
K4
K5
Shmoo Version=3.6
DDR Freq=0x0000018E
%00000001%
RC1=00000005
WC1=FFFFFFF6
RC2=00000018
WC2=00000043
RC3=0000000E
WC3=FFFFFFF6
RC4=0000000E
WC4=00000043
NWC=0000001C
RC5=00000005
WC5=0000001C
RC6=00000018
WC6=0000001C
NRC=0000000E
RW=00000014
WW=0000004E
G=00000000 R=0000000E W=0000001C
BL=00000000
RC1=00000005
RC2=0000001B
BL=00000001
RC1=00000006
RC2=00000018
BL=00000002
RC1=00000002
RC2=0000001B
BL=00000003
RC1=00000000
RC2=00000018
3
COPY CODE
AS567
CP16=80040483,BEA3519F,80000167
BCM97325B0 CFE v2.27, CFE core v2.12, Endian Mode: Little
Build Date: Thu Feb 18 20:58:28 2010 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
DDR Freq: 398MHz
CPU speed: 333MHz
Memory Config: 32-bit UMA
Device Tech: 1Gb
Total memory: 256MB
Total flash: 128MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
CFE initialized.
checking usb
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:rootfstype=jffs2 root=/de
v/mtdblock0 rw mem=0x8000000
Loading: 0x80001000/3174552 0x80308098/130932 Entry address is 0x802ea000
Starting program at 0x802ea000
<5>Linux version 2.6.18-7.3 (
amedeo@localhost.localdomain) (gcc version 4.4.3 (G
CC) ) #1 Wed Oct 12 13:52:55 CEST 2011
Fetching vars from bootloader... OK (E,d,B,C)
board_init_once: regval=23440802, ddr0_strap=2, , ddr1_strap=2, pci_size=0
Detected 128 & 128 MB on board, total 256 MB
CFE EnvVar: LINUX_FFS_STARTAD: 00000000, LINUX_FFS_SIZE: 07400000
CFE EnvVar: LINUX_PART_STARTAD: 07400000, LINUX_PART_SIZE: 00400000
g_board_RAM_size=256MB
Options: sata=0 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
CPU revision is: 0101954c
FPU revision is: 01739300
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
User-defined physical RAM map:
node [00000000, 07000000: RAM]
node [07000000, 09000000: RSVD]
<5>Reserving 144 MB upper memory starting at 07000000
<7>On node 0 totalpages: 65536
<7> DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists. Total pages: 65536
<5>Kernel command line: rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 c
onsole=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 128kB, 8-way, linesize 128 bytes.
SCM configuration: 00fac688 41d4d617 00f07100 8fff0d00 81ff0100 0fff0fff
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
timer irq 100
PID hash table entries: 2048 (order: 11, 8192 bytes)
Found MIPS counter frequency: 167 Mhz
Using 166.501 MHz high precision timer.
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 109056k/262144k available (2474k kernel code, 152948k reserved, 501k dat
a, 124k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
PCI->SDRAM window size: 512MB
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
brcm-pm: disabling power to USB block
brcm-pm: disabling power to ENET block
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A
loop: loaded (max 8 devices)
brcm-pm: enabling power to ENET block
Broadcom BCM7325 P20 Ethernet Network Device v2.0 Oct 12 2011 13:51:34
Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)
blackhole initialised
Broadcom STB NAND controller (BrcmNand Controller)
i=0, CS[0] = 0
NAND_CS_NAND_XOR=00000001
brcmnand_probe: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=55042200
NAND Config: Reg=55042200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB
Found NAND: ACC=d3000000, cfg=55042200, flashId=ecf10095, tim1=4232222d, tim2=00
000d94
BrcmNAND version = 0x0200 128MB @00000000
brcmnand_probe: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=55042200
Found NAND chip on Chip Select 0, chipSize=128MB, usable size=128MB, base=0x
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 2.0 NAND flash size 128MB @18000000
mtd->oobsize=64, mtd->eccOobSize=16
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
brcmnand_default_bbt: bbt_td = bbt_main_descr
brcmnandCET: Status -> Deferred
numchips=1, size=8000000
Creating 7 MTD partitions on "bcm7xxx-nand.0":
0x0000000000000000-0x0000000007400000 : "rootfs"
0x0000000007400000-0x0000000007800000 : "kernel"
0x0000000007800000-0x0000000007c00000 : "boot"
0x0000000007c00000-0x0000000007d00000 : "cfe"
0x0000000007d00000-0x0000000007d80000 : "mac"
0x0000000007d80000-0x0000000007e00000 : "env"
0x0000000007e00000-0x0000000007f00000 : "nvm"
usbmon: debugfs is not available
ehci_hcd_brcm_init: Initializing 2 EHCI controller(s)
brcm-pm: enabling power to USB block
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
- USB h/w setup mode <B>
- USB power enable set for active HIGH mode
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI
brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2
brcm-ehci-1 brcm-ehci-1.1: irq 63, io mem 0x10480500
brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3
brcm-ohci-0 brcm-ohci-0.0: irq 64, io mem 0x10480400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480608
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4
brcm-ohci-1 brcm-ohci-1.1: irq 59, io mem 0x10480600
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17