I have intsalled this Version On my box and all looks good, the only problem I have found is that after selecting restart from the menu
it hangs and nothing.
I have to turn the box off from the power and on again.
I attached a serial cable and this is what I found,
Hotplug - status.connected 0
CPU 0 Unable to handle kernel paging request at virtual address c0935370, epc == c0935370, ra == 80060844
Oops[#1]:
Cpu 0
$ 0 : 00000000 00000001 c0935370 00000000
$ 4 : 0000000d c0d19464 00020000 86fef615
$ 8 : 31008400 1000001f 804f35b0 00000001
$12 : 00000000 ffffffff 00000000 ffffff80
$16 : 865bc680 00010000 00000000 00000000
$20 : 00000001 0000000d 00000002 805e6460
$24 : 80607cf0 00000000
$28 : 86fd6000 86fd7c50 00010000 80060844
Hi : 0000002d
Lo : c6be91ca
epc : c0935370 0xc0935370
Tainted: P
ra : 80060844 handle_irq_event_percpu+0x5c/0x280
Status: 31008002 KERNEL EXL
Cause : 10800008
BadVA : c0935370
PrId : 0101954c (Brcm4380)
Modules linked in: procmk 8192cu ipv6
Process rcS (pid: 51, threadinfo=86fd6000, task=86f7f1f8, tls=77824490)
Stack : 000204d0 8060827c 00000054 80607f18 00000000 ffffffff 805e6460 00010000
00000020 00000000 00000002 b0001408 b0001410 b0001404 b000140c 80060aa0
ffffff6f 80070684 00000002 00000000 805e6460 80063830 00000000 00000041
80607cd0 00000000 80607cd0 00000000 00000001 80060408 00000000 80282434
00000041 00000002 80607cd0 80005818 00000001 8120220c 00000008 00000000
...
Call Trace:
[<80060aa0>] handle_irq_event+0x38/0x5c
[<80070684>] __alloc_pages_nodemask+0xec/0x670
[<80063830>] handle_level_irq+0x98/0x118
[<80060408>] generic_handle_irq+0x44/0x64
[<80282434>] kobject_get+0x1c/0x2c
[<80005818>] do_IRQ+0x18/0x24
[<800022b8>] plat_irq_dispatch+0x118/0x1e0
[<80003f6c>] ret_from_irq+0x0/0x4
[<80088094>] __pte_alloc+0x38/0x2d4
[<800250ec>] dup_mm+0x408/0x500
[<8001265c>] local_flush_tlb_mm+0x74/0xc4
[<800931a8>] anon_vma_fork+0x88/0x1dc
[<800250ec>] dup_mm+0x408/0x500
[<800baa64>] dup_fd+0x4c/0x360
[<80025a78>] copy_process+0x84c/0x10c4
[<80026378>] do_fork+0x88/0x220
[<8009e3d8>] filp_close+0x78/0xac
[<80008a80>] _sys_clone+0x8c/0xd0
[<8009e4b4>] sys_close+0xa8/0xd0
[<8000c5c4>] stack_done+0x20/0x40
Code: (Bad address in epc)
---[ end trace 5ad61efb332367df ]---
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 180 seconds..