BlackHole Vu+ Duo 1.6.6

Status
Not open for further replies.
G

goofy gorilla

Vu+ Newbie
ok guys...i cant seem to get ****** 1.35a or 1.37 to work...***** works fine....i edited the newcamd.list with my N line and entered and save dthe following
CWS= 123.165.456.21 12345 test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 ..picture dont clear....however when i switch to ***** everything works fine...ive edited the line for obvious reasons..any ideas.ta
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
goofy gorilla said:
ok guys...i cant seem to get ****** 1.35a or 1.37 to work...***** works fine....i edited the newcamd.list with my N line and entered and save dthe following
CWS= 123.165.456.21 12345 test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 ..picture dont clear....however when i switch to ***** everything works fine...ive edited the line for obvious reasons..any ideas.ta
Click to expand...

NO CAM SUPPORT OR TALK HERE !!!! RESPECT RULES !!!!!!

ANOTHER POST LIKE YOUR QUOTED HERE AND YOU ARE OUT. THIS IS A WARNING.
 
Matrix10

Matrix10

Administrator
goofy gorilla said:
ok guys...i cant seem to get ****** 1.35a or 1.37 to work...***** works fine....i edited the newcamd.list with my N line and entered and save dthe following
CWS= 123.165.456.21 12345 test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 ..picture dont clear....however when i switch to ***** everything works fine...ive edited the line for obvious reasons..any ideas.ta
Click to expand...

Very serious warning
We do not tolerate the EMU discussion on this forum.

Read forum rules.

Thanks
 
B

bono9999

Vu+ Newbie
Hi guys, thank you for such a great job again. However, I has trouble using this 1.6.6 Version ... had to roll back to 1.6.5 due to "black screen" problem after reflashing. I flashed twice & using 2 different sticks but got no results, so rolled back.

Of course i did the duo_cfe_3_0_usb required update first, as my /proc/mtd files shows.

root@bm750:/proc# cat mtd
dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00200000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
mtd4: 00080000 00020000 "mac"
mtd5: 00080000 00020000 "env"
mtd6: 00100000 00020000 "nvm"

Any idea about the cause? Thanks again and keep it up!
 
Mito

Mito

Administrator
bono9999 said:
Hi guys, thank you for such a great job again. However, I has trouble using this 1.6.6 Version ... had to roll back to 1.6.5 due to "black screen" problem after reflashing. I flashed twice & using 2 different sticks but got no results, so rolled back.

Of course i did the duo_cfe_3_0_usb required update first, as my /proc/mtd files shows.

root@bm750:/proc# cat mtd
dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00200000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
mtd4: 00080000 00020000 "mac"
mtd5: 00080000 00020000 "env"
mtd6: 00100000 00020000 "nvm"

Any idea about the cause? Thanks again and keep it up!
Click to expand...
mtd1 should have a different value after the Boot Loader upgrade:
mtd1: 00400000 00020000 "kernel"

Try to upgrade again the Boot Loader.
 
Matrix10

Matrix10

Administrator
Mito said:
mtd1 should have a different value after the Boot Loader upgrade:
mtd1: 00400000 00020000 "kernel"

Try to upgrade again the Boot Loader.
Click to expand...

bootloader update and image install
very easy

you need to make update/install twice
bootloader first and after bootloader update image update/image install.
USB procedure is the same .

Format USB stick

1. Unzip the duo_cfe_3_0_usb.zip to USB stick.(There should be /vuplus/duo/cfe_cfe_auto.bin)
2. Insert USB stick into the USB port of duo and power on the box.
3. It takes just a few secs to update.
4. If Duo displays the message "Finished..reboot", remove the USB stick and restart box.
5. Format USB stick again.
6. Unzip BH image and copy to USB stick (standard procedure)
7. Insert USB stick into the USB port of duo and power on the box.
(standard procedure).
8.If Duo displays the message "Finished..reboot", remove the USB stick and restart box.

http://archive.vuplus.com/image/2011/6.0/duo_cfe_3_0_usb.zip
 
B

bono9999

Vu+ Newbie
Opps ... I see i've followed a misleading after-install boot checking indication. Gonna try it again, will check it using those parameters. Thanks for your ultra-prompt assistance ;)
 
hih64

hih64

Vu+ User
Great Image Like Always Thanks a Lot guys , hopping also for Anaglyph request for next update also :evil:
 
javier007

javier007

Vu+ User
Hi:
after update boot it shows me this:

dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00400000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
mtd4: 00080000 00020000 "mac"
mtd5: 00080000 00020000 "env"
mtd6: 00100000 00020000 "nvm"

but after update image it puts:

dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00400000 00020000 "kernel"
mtd2: 00200000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
mtd4: 00080000 00020000 "mac"
mtd5: 00080000 00020000 "env"
mtd6: 00100000 00020000 "nvm"

it´s normal the value of mtd2??or i have to do anything more...

thanks for advance..
 
Status
Not open for further replies.
Top