T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1fe1 ProdID=5456 Rev= 0.00
S: Manufacturer=Max
S: Product=GoTView Satellite HD
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=3030 Ivl=125us
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=2178 Ivl=125us
I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=2058 Ivl=125us
I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 970 Ivl=125us
I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 684 Ivl=125us
I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 940 Ivl=125us
I'm very happy to see your tuner is been detected now.Thank you very much. The tuner found:
View attachment 5848
And more:
View attachment 5849
This is the tuner B:
View attachment 5850
Manual scan:
View attachment 5851
But other problems arose:
View attachment 5852
Does not find services. What's the problem?
Seems all correct.Here.
Yes.Could you please test your device with an already set of settings ?
I haven't on my parent's house my TeVii S660 and I cannot make comparative tests.Antenna tuned to Sirius 4/Astra 1E (4.8)
View attachment 5854
Antenna is also configured to Sirius 4/Astra 1E (4.8)
View attachment 5855
Antenna is not turned.
And so on all satellites and frequencies - the signal is the same.
1.120 +static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
1.121 +{
1.122 + static u8 command_start[] = {0x00};
1.123 + static u8 command_stop[] = {0x01};
1.124 + struct i2c_msg msg = {
1.125 + .addr = SU3000_STREAM_CTRL,
1.126 + .flags = 0,
1.127 + .buf = onoff ? command_start : command_stop,
1.128 + .len = 1
1.129 + };
1.130 +
1.131 + i2c_transfer(&adap->dev->i2c_adap, &msg, 1);
1.132 +
1.133 + return 0;
1.120 +static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
1.121 +{
1.122 + static u8 command_start[] = {0x00};
1.123 + static u8 command_stop[] = {0x01};
1.124 + struct i2c_msg msg = {
1.125 + .addr = SU3000_STREAM_CTRL,
1.126 + .flags = 0,
1.127 + .buf = onoff ? command_start : command_stop,
1.128 + .len = 1
1.129 + };
1.130 +
1.131 + info("%s: %d\n", __func__, onoff);
1.132 + i2c_transfer(&adap->dev->i2c_adap, &msg, 1);
1.133 +
1.134 + return 0;
In my in TeVii S660, streaming is always present.
And SatelliteHD GOTVIEW must include a "dvb_usb_start_feed".
depmod.26
depmod
I'm sorry. Post # 40 - install, determined adapter. no did scan.
And now tried to scan - Now, did scan
The output driver DVBSKy S860, Cinergy S2 USB HD - are not suitable.
Under windows - also does not work.
In Windows, only with the native driver