Official Vu+ Wireless dongle 300 Mbps problem on BH 2.0.1 !

angelofsky1980

angelofsky1980

BlackHole Driver Specialist
yadranko said:
As it seems working also with WEP encryptation, what I maybe find strange is this line:
"Encryption key: (the key) [2] Security mode:restricted Security mode:eek:pen"
Is it correct to have 2 security mode? It shouldn't be just one or the other? I always found security mode: open connected with WEP, but I am not an expert, so probably I am completely wrong...
Thanks!
Click to expand...

About "Encryption key" I've tested some drivers and the result is too different from one driver to another.
One driver (Atheros) report "Encryption key: off" but the network uses WPA2 crypt ..... I think it's not a problem ....
 
R

remek3333

Vu+ Newbie
angelofsky1980 said:
About "Encryption key" I've tested some drivers and the result is too different from one driver to another.
One driver (Atheros) report "Encryption key: off" but the network uses WPA2 crypt ..... I think it's not a problem ....
Click to expand...
When You fix the problem with my official Vu + 300 Mbps wireless dongle on my VU + Solo2 with Black Hole 2.0.1?
 
Y

yadranko

Vu+ Newbie
Thank you Angelofsky.
I tried the new IPK but it still doesn't work with WPA2.
I enclose the wifi.txt file if could help.
 

Attachments

  • wifi.txt
    19.6 KB · Views: 33
Y

yadranko

Vu+ Newbie
angelofsky1980 said:
Seems that your stick doesen't detect correctly your SSID. Verify the Access Point/Wireless Router configuration.
Click to expand...
Thanks!
I check it and everything is working right.
Other devices can connect without any problem.
The network is crypted in WPA2-PSK (AES).
I tried (as I did with the previous driver) to disable the encryption and in this case the dongle works perfectly.
So it seems that the problem is still connected with the WPA encryption.
I enclose the wifi.txt file made with disabled encryption so you could compare them.
 

Attachments

  • wifi.txt
    19.3 KB · Views: 12
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
yadranko said:
Thanks!
I check it and everything is working right.
Other devices can connect without any problem.
The network is crypted in WPA2-PSK (AES).
I tried (as I did with the previous driver) to disable the encryption and in this case the dongle works perfectly.
So it seems that the problem is still connected with the WPA encryption.
I enclose the wifi.txt file made with disabled encryption so you could compare them.
Click to expand...

Could you please post some details about your wireless configuration taken from your wireless router when you configure WPA encryption? Don't post your WPA PSK of course :)

Verify also if your wireless router has the latest firmware version and post here producer, model and current firmware version.
 
Y

yadranko

Vu+ Newbie
angelofsky1980 said:
Could you please post some details about your wireless configuration taken from your wireless router when you configure WPA encryption? Don't post your WPA PSK of course :)

Verify also if your wireless router has the latest firmware version and post here producer, model and current firmware version.
Click to expand...

@Angelofsky1980
Netgear Router DGN2200
Latest firmware: V1.0.0.46_7.0.44 (the router on login checks if there are any updates)
Wireless settings
Name (SSID): WIZARD
SSID broadcast is disabled
Region: Europe
Ch. 1
Mode: Up to 300 Mbps
Security Options: WPA2-PSK (AES)
 
bootsma

bootsma

Vu+ Newbie
Hello i have the same problem only whit the 150 Mbps type works fine whit BH 1.7.9,
but will not work with BH 2.0.1 version it also the official type for the vu+,
maybe there are more people whit the same problem.
Maybe you can also check this version also thanks for the latest BH 2.0.1 like it very much!!!
Thanks for the good job !!!
 
F

Foxy21

Vu+ Newbie
Hello,

Is there any chance that we will get this problem fixed in the next few days or should I consider rolling back to BH 1.7.9-3 version? it has been now almost 1 month since the problem has been reported!

Thank you for your feedback
 
paolino

paolino

Vu+ User+++
yadranko said:
@Angelofsky1980
Netgear Router DGN2200
Latest firmware: V1.0.0.46_7.0.44 (the router on login checks if there are any updates)
Wireless settings
Name (SSID): WIZARD
SSID broadcast is disabled
Region: Europe
Ch. 1
Mode: Up to 300 Mbps
Security Options: WPA2-PSK (AES)
Click to expand...

SSID to visible, Channel to Auto.
 
paolino

paolino

Vu+ User+++
Foxy21 said:
Hello,

Is there any chance that we will get this problem fixed in the next few days or should I consider rolling back to BH 1.7.9-3 version? it has been now almost 1 month since the problem has been reported!

Thank you for your feedback
Click to expand...

None was born wise, BH is trying to be.

Is your dongle working with official image? BH is based on that one and is trying to do the best.

DISCLAIMER​

THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.​
 
Y

yadranko

Vu+ Newbie
paolino said:
SSID to visible, Channel to Auto.
Click to expand...
I was sure that these settings weren't the problem, but in order to be 100% certain I tried what you suggested.
I can confirm you that these settings are OK.
The problem is not connected with SSID or channel.
Otherwise the dongle will never connect, instead it doesn't work only with WPA encryption.
 
paolino

paolino

Vu+ User+++
@Vu+: is it possible to know, what chipset the official WLAN 802.11 b/g/n 300 MBps dongles have?

remek3333 reports RT5372, official Duo Ultimo (Artorius and Shiro) RTL8192CU, yadranko RT2870STA, athlon64x2 RT5372 ?

Which one is really official? Is more versions on market? I smell clones ...

Official Eastern Europe dealer photo of WLAN Adapter
 

Attachments

  • WIFI_VU+.jpg
    WIFI_VU+.jpg
    57.7 KB · Views: 20
You must log in or register to reply here.
Top