angelofsky1980
BlackHole Driver Specialist
I will attach on this post the ipk files and a package for BlackHole image to implement PCSC smartcard readers if you need another reader.
Install is very simple.
Prerequisites:
- copy all mipsel.ipk files into your box (usually /tmp folder)
- if you have Duo box, copy bm750.ipk files into your box (usually /tmp folder)
- if you have Solo box, copy vusolo.ipk files into your box (usually /tmp folder)
- connect your PCSC device before installation
Install from Image:
- using the image package manager, install ipk files in the filename order (1 to 8)
- install the bh.tgz file only after the ipk installation
- reboot your box
Install from telnet:
- go to into folder you are uploaded the files (usually /tmp)
- do the following command:
- using your image package manager, install bh.tgz package
- reboot your box
Post-install verification steps:
- login into your box via telnet or ssh
- do the following commands:
If the report (at least in the output text):
the installtion is done and you can use your new reader.
Report what reader you use if works correctly.
Please respect rules of this board
Install is very simple.
Prerequisites:
- copy all mipsel.ipk files into your box (usually /tmp folder)
- if you have Duo box, copy bm750.ipk files into your box (usually /tmp folder)
- if you have Solo box, copy vusolo.ipk files into your box (usually /tmp folder)
- connect your PCSC device before installation
Install from Image:
- using the image package manager, install ipk files in the filename order (1 to 8)
- install the bh.tgz file only after the ipk installation
- reboot your box
Install from telnet:
- go to into folder you are uploaded the files (usually /tmp)
- do the following command:
Code:
ipkg install *.ipk
- reboot your box
Post-install verification steps:
- login into your box via telnet or ssh
- do the following commands:
Code:
ps aux | grep hald
ps aux | grep pcscd
If the report (at least in the output text):
Code:
/usr/sbin/hald
/usr/sbin/pcscd
the installtion is done and you can use your new reader.
Report what reader you use if works correctly.
Please respect rules of this board
Attachments
-
1_hal-info_20090414-r0_all.ipk21.4 KB · Views: 114
-
2_libdbus-glib-1-2_0.82-r0.0_mipsel.ipk47 KB · Views: 92
-
3_libusb-1.0-0_1.0.4-r0_mipsel.ipk22.7 KB · Views: 89
-
4_libusb-0.1-4_0.1.2-r0_mipsel.ipk7 KB · Views: 87
-
5_hal_0.5.11-r6_bm750.ipk344 KB · Views: 90
-
6_pcsc-lite_1.5.2-r0_mipsel.ipk44.2 KB · Views: 90
-
7_libpcsclite1_1.5.2-r0_mipsel.ipk21 KB · Views: 89
-
8_ccid_1.3.8-r0_mipsel.ipk48.8 KB · Views: 90
-
pcscd_init_bh.tgz479 bytes · Views: 106
-
hal_0.5.11-r6_vusolo.ipk344.9 KB · Views: 58