Problem with recording on VU+ DUO with Black Hole 1.6.5

sebastianw

sebastianw

Vu+ Newbie
Hey every body,
I have a problem with recording on my VU+ DUO with Black Hole 1.6.5.
When I make a timer on two channels, at the same time only the one is recording fine, the other record is begin made, but when I select "play" it starts, and it writing "END" on the TV, 5 sec. after I have pressed "play".

My installation/setup is like following:
Europe Dish 88 cm - Triax TD 88 with 4 LNB/discqC (1°W, 5°E, 13°E and 19°E)
2 WAY Splitter TR85550-A / 1 in 2 out
VU+ DUO Twin DVB-S2 Linuxbased with 500GB HDD.

my%20setup.png
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sebastianw said:
Hey every body,
I have a problem with recording on my VU+ DUO with Black Hole 1.6.5.
When I make a timer on two channels, at the same time only the one is recording fine, the other record is begin made, but when I select "play" it starts, and it writing "END" on the TV, 5 sec. after I have pressed "play".

My installation/setup is like following:
Europe Dish 88 cm - Triax TD 88 with 4 LNB/discqC (1°W, 5°E, 13°E and 19°E)
2 WAY Splitter TR85550-A / 1 in 2 out
VU+ DUO Twin DVB-S2 Linuxbased with 500GB HDD.

my%20setup.png
Click to expand...

With this kind of switch, you can record 2 channels on both polarization (V or H).
 
Mito

Mito

Administrator
With your configuration, you can make more than one recording, at the same time, only on the same transponder.

Moreover, you don't need to use an external splitter, you can use the internal splitter.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sebastianw said:
Okay so if I wan to record on 1°W and 19°E at same time, I need another setup ?
Click to expand...

You need a DiseCQ switch for every LNB of the box and a dual out LNB for every LNB you have installed on dish.
Code: 
                                      LNB 1W                                           LNB 19.2E
                                  Exit1    Exit2                                     Exit1     Exit2
The both Exit1 will be connected to DisecQ switch to one exit and make the both connections with Exit2 connected to the other box LNB connection.
 
sebastianw

sebastianw

Vu+ Newbie
So I actually need 2 LNB with 2 out put and 1 DiSEqC more, or can I do it, if I put the 2 way splitter on one of the LNBs with a direct cable to one of the tuners ?
 
Mito

Mito

Administrator
sebastianw said:
So I actually need 2 LNB with 2 out put and 1 DiSEqC more, or can I do it, if I put the 2 way splitter on one of the LNBs with a direct cable to one of the tuners ?
Click to expand...
There are several solution for your problem.

If you need to make more than one recording, at the same time, on the same single satellite, you need an LNB with two output.
The first LNB output have to be connected directly to a tuner and the second LNB output connected to the DiSEqC switch.

If you want to be able to make more than one recording, at the same time, on any satellite, you need four LNB with two output.
Both the LNB output have to be connected to a DiSEqC switch and either the DiSEqC switch have to be connected to a single tuner (A and B).

In any case, you need to have two cables connected to your satellite dish.
 
You must log in or register to reply here.
Top