Problem with wireless network - tp-link

Q

qwe010

Vu+ Newbie
Hello all

I have (TL-WN321G)

i have installed and works well

But sometimes does not work

I went to the network status

And shows it is connected and then loses connection

More than once

even that the signal is good 45/100

any idea ?
 
Logan

Logan

Vip
I have not idea.
Someone has tryed to leave enabled both wlan interface and lan interface and reports that this make the wifi connection more stable.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
qwe010 said:
Does this mean that solo has a problem with encrypted wireless ?
Click to expand...

I've used your wifi adapter recently with Solo and Duo boxes.
My WiFi network is WPA encrypted and works regularly.

The main problem of this wifi device is that is not very tollerable when is connected to an Hub USB: connected directly to the box the wifi link is not lost for 3 last days.

I've connected the TPLink wifi device on the front USB port.
 
Q

qwe010

Vu+ Newbie
angelofsky1980 said:
I've used your wifi adapter recently with Solo and Duo boxes.
My WiFi network is WPA encrypted and works regularly.

The main problem of this wifi device is that is not very tollerable when is connected to an Hub USB: connected directly to the box the wifi link is not lost for 3 last days.

I've connected the TPLink wifi device on the front USB port.
Click to expand...

thank you angelofsky1980

i use the back
 
Q

qwe010

Vu+ Newbie
Thank you all

I did like what he said logan

( leave enabled both wlan interface and lan interface )

and use (wifi-bridge + TPLink wifi )

the connection became more stability !
 
Q

qwe010

Vu+ Newbie
now

The problem back

i make the modem very close to solo

Same problem

Now the connection does not become stable only after a while

I think the problem is due to encryption

because

In ( wireless network status )

I see ( encryption = unsupported )


And the connection not become stable until the word become is enabled

( encryption = enabled )

any idea ?
 
N

nazaradeh

Vu+ Newbie
hi dear Friends
i have Same problem
when encryption disable work fine
but when enable encryption = unsupported and not connect tyr (wep-wpa-wpa2)
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
nazaradeh said:
hi dear Friends
i have Same problem
when encryption disable work fine
but when enable encryption = unsupported and not connect tyr (wep-wpa-wpa2)
Click to expand...

We need some infos to help you :)
What kind of WIFI device do you use?
What image version do you use?
 
N

nazaradeh

Vu+ Newbie
dear angelofsky1980
Hi again
I'm embarrassed to ask all these questions.
i have two wifi first tp-link tl-wn321g v-4.1 dont have driver add next imag
second buy tp-link tl-wn321g v-3.6
linksys accesspoint wrt-160n and smc and wrg-160n

balck hole 1.5 and 1.46

i have 3 solo

thanks a lot
 
N

nazaradeh

Vu+ Newbie
dear angelofsky1980
Hi again
I'm embarrassed to ask all these questions.
i have two wifi first tp-link tl-wn321g v-4.1 dont have driver add next imag
second buy tp-link tl-wn321g v-3.6
linksys accesspoint wrt-160n and smc and wrg-160n

balck hole 1.5 and 1.46

i have 3 solo

thanks a lot
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
nazaradeh said:
dear angelofsky1980
Hi again
I'm embarrassed to ask all these questions.
i have two wifi first tp-link tl-wn321g v-4.1 dont have driver add next imag
second buy tp-link tl-wn321g v-3.6
linksys accesspoint wrt-160n and smc and wrg-160n

balck hole 1.5 and 1.46

i have 3 solo

thanks a lot
Click to expand...

Could you please report the output of the following command?

Code: 
cat /proc/bus/usb/devices
 
N

nazaradeh

Vu+ Newbie
hi
thank you angelofsky1980


Vuplus 2.0.5 + BlackHole 1.4.6 vusolo

vusolo login: root
root@vusolo:~# cat /proc/bus/usb/devices

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=2573 Rev= 0.01
S: Manufacturer=Ralink
S: Product=54M.USB.......
S: SerialNumber=12345
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt73
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@vusolo:~#
Click to expand...
OpenEmbedded Linux vusolo


Vuplus 2.0.5 + BlackHole 1.5 vusolo

vusolo login: root
root@vusolo:~# cat /proc/bus/usb/devices

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=2573 Rev= 0.01
S: Manufacturer=Ralink
S: Product=54M.USB.......
S: SerialNumber=12345
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt73
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0608 Rev= 9.01
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms

T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=187f ProdID=0201 Rev= 0.04
S: Manufacturer=MDTV Receiver
S: Product=MDTV Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=smsusb
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@vusolo:~#
Click to expand...
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
Seems that your device is correctly detected (rt73 driver).
Have you used the correct encrypted configuration in Wifi setup ?
If you have a WPA only wifi network you should use WPA settings: this should be applied if you have a WPA2 only network.

I hope this concept is clear: my English is not very good :(
 
N

nazaradeh

Vu+ Newbie
Hi again
dear angelofsky1980

yes my device is work correctly with no encryption
when set encryption on Wireless network (ap) all device work Except solo
in Wireless network (ap) set wpa on solo set wpa , ap set wpa2 in solo set wpa2 or set in (ap) wep in solo set wep but no (some time show connect in adaptor setting not get ip Address status Gray not green

wireless network status I see encryption = unsupported but setting is correct
And the connection not become stable until the word become is enabled

i think Something has a problem with encrypted wireless

best regards
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
nazaradeh said:
Hi again
dear angelofsky1980

yes my device is work correctly with no encryption
when set encryption on Wireless network (ap) all device work Except solo
in Wireless network (ap) set wpa on solo set wpa , ap set wpa2 in solo set wpa2 or set in (ap) wep in solo set wep but no (some time show connect in adaptor setting not get ip Address status Gray not green

wireless network status I see encryption = unsupported but setting is correct
And the connection not become stable until the word become is enabled

i think Something has a problem with encrypted wireless

best regards
Click to expand...

Vu+Solo and wncrypted Wifi doesen't have problems: I have some Wifi sticks for my tests and all works correctly with my WPA wiFi network.
The setting I use on the box for encryption is "WPA or WPA2".

The issue you are encountered seems a wrong wifi password inserted .....
 
N

nazaradeh

Vu+ Newbie
dear angelofsky1980
hi
Thanks a lot
Thank you for your attention and answers
This is my picture settings.
If solo dont have problem of this comment
I try again to see the problem is resolved
best regards
i268146_screenshot.jpg

i268145_3.jpg

i268144_1.jpg
 
You must log in or register to reply here.
Top