Transponder problem SR 3000 continues

[tobar67]

Hi
I have upgraded my UNO with TS_pro.dat and he continues to not scan this transponder :

Hispasat 1C 11731.00 H DVB-S2 8PSK 30000 3/4
Hispasat 1C 12012.00 H DVB-S2 8PSK 30000 3/4
Hispasat 1C 12092.00 H DVB-S2 8PSK 30000 3/4

only this transponder has been scan and ok
Hispasat 1C 12052.00 H DVB-S2 8PSK 30000 3/4

the provider is Meo, I have try with varios images and is the same.
the upgrade of firmware resolve all or some frequency transponder problem?

thanks

 

[angelofsky1980]

Hi
I have upgraded my UNO with TS_pro.dat and he continues to not scan this transponder :

Hispasat 1C 11731.00 H DVB-S2 8PSK 30000 3/4
Hispasat 1C 12012.00 H DVB-S2 8PSK 30000 3/4
Hispasat 1C 12092.00 H DVB-S2 8PSK 30000 3/4

only this transponder has been scan and ok
Hispasat 1C 12052.00 H DVB-S2 8PSK 30000 3/4

the provider is Meo, I have try with varios images and is the same.
the upgrade of firmware resolve all or some frequency transponder problem?

thanks

If the two screenshots posted are the tune settings you use, please select DVB-S2 instead of DVB-S.

 

[tobar67]

It´s the same.
With the Frequency 12052 it's ok and when i change to 12012 not ok

 

[tobar67]

Does anyone have the same problem ?

 

[kabise]

i can confirm that problem , only found out yesterday

cheers
kabise

 

[tobar67]

Is there any solution ?

 

[angelofsky1980]

Is there any solution ?

I will make some tests on the TPs indicated in a post below this ...

 

[tobar67]

Thanks

 

[tobar67]

Any new ?

 

[zarbman]

Friends these transponders correspond to the MEO service and if they work only have to apply the Vu+ UNO Firmware Upgrade this line http://www.vuplus-community.net/board/threads/vu-uno-firmware-upgrade.2955/....

So I have it ... greetings

 

[kabise]

@zarbman

can you post your config and if possible the screenshot , although i apply the update only MEO transponder have a problem. do you use VU+ Uno?

cheers

 

[zarbman]

Friend Kabis I also I have the VU + UNO and it works perfectly just that to have those sr 30000 transponders have to install the upgrade but there is no way ... I have installed the latest 1.6.5 imagem BH and did the upgrade directly to the plugin that comes in this imagem

 

[tobar67]

Friends these transponders correspond to the MEO service and if they work only have to apply the Vu+ UNO Firmware Upgrade this line http://www.vuplus-community.net/board/threads/vu-uno-firmware-upgrade.2955/....

So I have it ... greetings

already made with varios image BH 1.6.5 and version 5.11 and no result.

 

[zarbman]

Friend you have to do this upgrade option for pluging directly, asking you to save you specify on the pen, then run and remains at work, I say it because it had also been disappointed transponders for channels sr meo are all 30000 and with VU + UNO does not work, check this forum I saw it was this option and I did ... if you do not put this upgrade does not work that frequency with any imagem ..... .... greetings

 

[zarbman]

The configuration of the dish for channels is not easy Meo as they require more fine tuning to gain access to all channels ... put the channel list if you have no signal, applying the upgrade is not for the VU + but the dish is not picking up enough strength and quality these transponders

Hispasat 1C 11731.00 H DVB-S2 8PSK 30 000 3 / 4
Hispasat 1C 12012.00 H DVB-S2 8PSK 30 000 3 / 4
Hispasat 1C 12092.00 H DVB-S2 8PSK 30 000 3 / 4

I have this same list for the satellites only that astra19-Hispano - meo channels hotbird and work perfectly ...

 

[tobar67]

I adjust the dish again and already works.

Thanks to all