UNO 4K SE not boot (emmcflash0 problem)

[pestrac]

Hello, i tried to flash an image to Vu+ UNO 4K SE and i bricked the device.

Accesing by rs232 console i get this:

BOLT> show devices

Device Name          Description

-------------------  ---------------------------------------------------------

              uart0  16550 DUART at 0xf040a900 channel 0

               mem0  Memory

        flash0.bolt  SPI flash @ CS0: 0x00000000-0x00200000 (2048KB)

      flash0.macadr  SPI flash @ CS0: 0x00200000-0x00210000 (64KB)

       flash0.nvram  SPI flash @ CS0: 0x00210000-0x00220000 (64KB)

     flash0.devtree  SPI flash @ CS0: 0x00220000-0x00230000 (64KB)

             flash0  SPI flash @ CS0: 0x00000000-0x00400000 (4MB)

               eth0  GENET Internal Ethernet at 0xf0b00000

              mdio0  GENET MDIO at 0xf0b00800

              sata0  SATA3 AHCI Device

            uart_b0  16550 DUART B at 0xf040a980 channel 0

           usbdisk0  USB Disk unit 0

       tcpfastboot0  TCP Fastboot (port 1234)

        tcpconsole0  TCP Console (port 23)

*** command status = 0

Any solution to this problem?

Thanks!

 

[newgolfer]

VU+è Uno 4k SE ?
Smell like a CLONE !!!

 

[Mick12334]

The VU+ Uno 4K SE is an official VU+ receiver:

http://vuplus.com/sub/sub0117.php

 

[AlexWilMac]

If really every attemps fail, it's probably a hw failure for the flash memory.
But, before saying it, try several USB stick, partitioned and formatted as explained in our guides.

 

[newgolfer]

Isn't a clone: my mistake.