VU DUO+ HELP!!

[hoffmann]

hello guys! MEOBOOT was trying to use and I think I put it in flash,now appears to me starting unit only and does not leave it! How do I recover the same.

Thanks
hoffmann

 

[a911]

I would recommend that U re-install the BH image, then go to>the Device Manger >mount the USB that you will use for Meoboot >> save (E2 will restart)!
Now U'r ready to install Meoboot, at External Flash (USB media)!

RgdZ
a911

 

[hoffmann]

Good Day Friend! The problem that the decoder is just starting ... on the LCD and it does not stay in the network, so do not have access to anything or DCC!

 

[angelofsky1980]

Good Day Friend! The problem that the decoder is just starting ... on the LCD and it does not stay in the network, so do not have access to anything or DCC!

If you have a USB stick connected, remove it.... The box should start correctly ....

 

[hoffmann]

Hi angelofsky1980!
I'm not with any USB flash drive connected to it! I ask for help!

 

[angelofsky1980]

Hi angelofsky1980!
I'm not with any USB flash drive connected to it! I ask for help!

Ok.
Usually the common problem of "Starting ..." is the presence of a uncompatible USB stick.
I suggest to reflash your box. If this doesen't work you can try to flash using a serial cable. If it fail, the only thing to do is to inspect your box with a serial cable and view what goes wrong on boot process.