vu+ solo 2 and ssd 2.5 sata

[youssef]

Solid-state drive do you work on vu+solo 2 ?

 

[angelofsky1980]

Solid-state drive do you work on vu+solo 2 ?

SSDs disks are SATA disks: they should work correctly.

 

[eda]

Vuplus 2.2.0 + BlackHole 1.7.9 vusolo2
 
vusolo2 login: root
root@vusolo2:~# hdparm -i /dev/sda1
 
/dev/sda1:
 
Model=OCZ-VERTEX3 LP                          , FwRev=2.22    , SerialNo=OCZ-08U5V2J31GUSQ18M
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes:  pio0 pio1 pio2 pio3 pio4
DMA modes:  mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: unknown:  ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7
 
* signifies the current active mode
 
 
root@vusolo2:~# hdparm -tT /dev/sda1
 
/dev/sda1:
Timing cached reads:  1300 MB in  2.00 seconds = 649.84 MB/sec
Timing buffered disk reads:  508 MB in  3.01 seconds = 168.75 MB/sec
root@vusolo2:~#

 

[youssef]

Thank you