vu+ solo2 - 2.1.5 - no tuner working
- Thread starter ctrl
- Start date
a911
The BH Lover
U may have a corrupted Downloaded BH 2.1.5 file, try again with a new file!
tried already 3 times
twin lnb and b is "same as A"
angelofsky1980
BlackHole Driver Specialist
Use two indipendent configurations and not use "Same as".
Are you using a motorized dish, or fixed dish, on one satellite?
If using a Motorized dish, and twin LNB, with two cables going to your receiver, one to Tuner A, the second to Tuner B, and using a Usals motor, then set the Tuner, connected to your motor, e.g. Tuner A, as Simple, Mode = positioner, and enter your latitude, and longitude details, you then set the other tuner, in this case tuner B, to second cable of motorized dish.
If it's a fixed dish then it's just simple, fixed, and the satellite, e.g. Thor 0.8W, and the second tuner as equal to Tuner A.
If using a Motorized dish, and twin LNB, with two cables going to your receiver, one to Tuner A, the second to Tuner B, and using a Usals motor, then set the Tuner, connected to your motor, e.g. Tuner A, as Simple, Mode = positioner, and enter your latitude, and longitude details, you then set the other tuner, in this case tuner B, to second cable of motorized dish.
If it's a fixed dish then it's just simple, fixed, and the satellite, e.g. Thor 0.8W, and the second tuner as equal to Tuner A.