vu+ solo2 i cant flash any image but openpli

[mqhmoud2003]

Dears
any one can help me i try to flash any image rather than openpli but always any image stuck at starting (vu plus solo2 is orginal)
then i have to flash again openpli to make vu work again
i use usb to flash image

i do try meoboot but the sam problem no image work rather than open pli
at informtion
openpli 4
dvb drivers 1.12.2015
python version 2.7.3
kernel version 3.13.5

there is hhd toshiba 320 gb
i do some try to remove hdd and try to flash other image but also not working rather than openpli

 

[angelofsky1980]

Dears
any one can help me i try to flash any image rather than openpli but always any image stuck at starting (vu plus solo2 is orginal)
then i have to flash again openpli to make vu work again
i use usb to flash image

i do try meoboot but the sam problem no image work rather than open pli
at informtion
openpli 4
dvb drivers 1.12.2015
python version 2.7.3
kernel version 3.13.5

there is hhd toshiba 320 gb
i do some try to remove hdd and try to flash other image but also not working rather than openpli

Have you followed correct howto about flashing?
http://www.vuplus-community.net/board/threads/howto-flash-update-vu-images.11819/

 

[mqhmoud2003]

thank you dear sir for your respond , yeas i do exactly the same steps but noyhing can be flash rather than openpli iamge.
when flash other image same step i do and i do press power on display and its write update uisp and erase and every command show but when finish it stuck on starting

 

[angelofsky1980]

thank you dear sir for your respond , yeas i do exactly the same steps but noyhing can be flash rather than openpli iamge.
when flash other image same step i do and i do press power on display and its write update uisp and erase and every command show but when finish it stuck on starting

Have you tried to format your USB stick with Windows in full mode to avoid problems?
Have you removed safety the USB stick from your windows PC?

 

[sabril]

hello do you have hdd internal or external if yes initialise it so your hdd is clean then switch off and try to update image

 

[flow69000]

Have you tried to unplug the Ethernet cable from the box when booting it up?

 

[mqhmoud2003]

yes i have internal HDD and i unplug it and unplug every thing but still only image is openpli
i format USB by PC as quick format fat 32

 

[mqhmoud2003]

note i can update openpli image directly through image

 

[sabril]

it is clone ?????

 

[sabril]

try to do factory reset go to plugins try to remove any plugins you have add in flash ????

 

[Wendy]

Did you choose your BH Image directly from this Forum?
Are you sure you're not trying with a backup Image?

 

[mqhmoud2003]

its original
i do try just now vti image but the same happen stuck on starting
i do hdd intializing
no i didnot do backup iamge
even i try to flash orginal image but same problem happen
yes i do take bh from forum

 

[mqhmoud2003]

openpli image is small size about 76mb
ut other image is more than 100 mb

 

[mqhmoud2003]

mybe internal flash is full idont know really

 

[mqhmoud2003]

i just try last bh image H but same problem stuck at starting

 

[Wendy]

Try a different usb stick.

 

[yura21]

mqhmoud2003,
Before flashing BH image flash the original http://code.vuplus.com/index.html?action=image&image=30&model=vusolo2

 

[nunigaia]

i just try last bh image H but same problem stuck at starting

Don´t use a usb 3.0 device, even if it says is usb 3.0 compatible with 2.0 .
Use a purely USB 2.0 device.

Format it under windows as fat32!

Try flash with this image --> http://code.vuplus.com/index.html?action=image&image=21&model=vusolo2

best regards
nunigaia