VuDuo: How to configure Double Tuners ?

[Charly Brown]

VuDuo: How to configure Double Tuners ?
Hi there !
I've got a problem to record and watch different channels on same satellite due to the fact
that Tuner B will be able for recording but I can only watch other channels available on
same transponders...
Do you guys know how to help me getting the good configuration of both tuners ?
I have Tuner A configured as Simple with ports for the three satellites that I use (A/Hispasat
30.0W, 2/Astra 19.2E, 3/nothing connected and 4/Hotbird 13.0E and Tuner B=Equal Tuner A.
Many thanks in advance for your help and know how !

 

[tobler]

you need a dual out lnb (2 connectors if you use that lnb just for one duo) for use the 2 different tuner
did yours lnbs has the dual out?

 

[Hanes69]

Two connectors at one LNB means TWO cables connected to receiver and of course two diSeq switches. Do you have this hardware configuration?

 

[alez]

@Charly Brown

You need:

- two output on all LNBs (2 on 30W, 2 on 13E and 2 on 19.2 E
- two DiSEqC switches

you must connect the cables that are coming out from DiSEqC to the Tuners A and B on the box

 

[tobler]

if you use usually just one sat position, you can change as well just the most used one with a twin output lnb (one wire connected as the previous one and the other wire to the tunerB input )
if you cannot add wires: give a look to the expensive scr unicable lnb and its switch