PCSC-Lite packages for OE 1.6 Images (Duo and Solo)

gobi2000 · Apr 23, 2011

pcscd daemon logo

root@bm750:/# pcscd -f -d
00000000 pcscdaemon.c:267:main() pcscd set to foreground with debug send to stderr
00000240 debuglog.c:239ebugLogSetLevel() debug level=debug
00001776 pcscdaemon.c:505:main() pcsc-lite 1.5.2 daemon ready.
01567053 hotplug_libhal.c:490:HPRegisterForHotplugEvents() Could not initialise connection to hald.
00000109 hotplug_libhal.c:491:HPRegisterForHotplugEvents() Normally this means the HAL daemon (hald) is not running or not ready.
00000064 pcscdaemon.c:524:main() SVCServiceRunLoop returned
00000051 pcscdaemon.c:530:at_exit() cleaning /var/run/pcscd

angelofsky1980 · Apr 23, 2011

gobi2000 said:
And how to run pcscd daemon ?

If you have installed all the packages in this post (for your box of course) the PCSCD daemon is running when the box boot.
You can verify the daemon is running with

Code:

ps aux | grep pcscd

angelofsky1980 · Apr 23, 2011

gobi2000 said:
pcscd daemon logo

Have you installed the bh.tgz package on the first post?

gobi2000 · Apr 23, 2011

Yes !

angelofsky1980 · Apr 23, 2011

gobi2000 said:
Yes !

I've verified your box (thanks for your PM) and seems that you don't have installed the pcscd_init_bh.tgz package.

I've installed it for you and now pcscd daemon run correctly

gobi2000 · Apr 23, 2011

When he sees pcsc ***** start site
My set *****.server

Code:

enable                        = 1
protocol                      = pcsc
Device                        = 0

log for *****

Code:

2011/04/23 20:09:18 2AAC63B0 s anticascader thread started
2011/04/23 20:09:18 2B8934B0 r ERROR opening device 0
2011/04/23 20:09:18 2B8934B0 r Cannot open device: 0

Deburg pcscd

Code:

root@bm750:/usr/bin# pcscd -f -d
00000000 pcscdaemon.c:267:main() pcscd set to foreground with debug send to stderr
00000147 debuglog.c:239:DebugLogSetLevel() debug level=debug
00000996 pcscdaemon.c:337:main() file /var/run/pcscd/pcscd.pub already exists.
00000123 pcscdaemon.c:339:main() Another pcscd (pid: 3010) seems to be running.

Driver run ok
cat /proc/bus/usb/devices

Code:

T:  Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=1021 Rev= 1.00
S:  Manufacturer=OMNIKEY
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

angelofsky1980 · Apr 23, 2011

gobi2000 said:

When he sees pcsc ***** start site
My set *****.server

Code:

enable                        = 1
protocol                      = pcsc
Device                        = 0

log for *****

Code:

2011/04/23 20:09:18 2AAC63B0 s anticascader thread started
2011/04/23 20:09:18 2B8934B0 r ERROR opening device 0
2011/04/23 20:09:18 2B8934B0 r Cannot open device: 0

Deburg pcscd

Code:

root@bm750:/usr/bin# pcscd -f -d
00000000 pcscdaemon.c:267:main() pcscd set to foreground with debug send to stderr
00000147 debuglog.c:239:DebugLogSetLevel() debug level=debug
00000996 pcscdaemon.c:337:main() file /var/run/pcscd/pcscd.pub already exists.
00000123 pcscdaemon.c:339:main() Another pcscd (pid: 3010) seems to be running.

Driver run ok
cat /proc/bus/usb/devices

Code:

T:  Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=1021 Rev= 1.00
S:  Manufacturer=OMNIKEY
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Talk about EMU/SW Cam is not allowed on the Board.

To verify if pcscd is currently running please use

Code:

ps aux | grep pcscd

If you want to execute the daemon in foreground do the following commands:

Code:

killall pcscd
 pcscd -f -d

gobi2000 · Apr 25, 2011

In just moments pcsc that is run after a while it dies and never sees the cards, escte possibly a script to see if they are ok?

gobi2000 · Apr 27, 2011

Whay it not ismode al driver ?

Code:

T:  Bus=01 Lev=03 Prnt=04 Port=03 Cnt=03 Dev#= 17 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=05 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=a022 Rev= 2.03
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=05 Cnt=06 Dev#=  9 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=06 Cnt=07 Dev#= 10 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

angelofsky1980 · Apr 27, 2011

gobi2000 said:

Whay it not ismode al driver ?

Code:

T:  Bus=01 Lev=03 Prnt=04 Port=03 Cnt=03 Dev#= 17 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=05 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=a022 Rev= 2.03
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=05 Cnt=06 Dev#=  9 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=06 Cnt=07 Dev#= 10 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Because the software pcscd drives your devices and there is not kernel drivers for these devices (I will verify with my PCSCs this evening).

gobi2000 · Apr 27, 2011

The problem is not that, the driver if there is what might make this the ordered 7 times (as many readers have this just moments)
If I restart it manually e * mu reader does not see them falling needles su driver what happens?

Code:

bm750 login: root
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10265 root      2640 S    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10268 root      2640 R    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10270 root      2640 R    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10273 root      2640 R    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10276 root      2640 S    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10281 root      2640 S    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10285 root      2640 R    grep hald
root@bm750:~#

PCSC-Lite packages for OE 1.6 Images (Duo and Solo)

gobi2000

Vu+ User

angelofsky1980

BlackHole Driver Specialist

angelofsky1980

BlackHole Driver Specialist

gobi2000

Vu+ User

angelofsky1980

BlackHole Driver Specialist

gobi2000

Vu+ User

angelofsky1980

BlackHole Driver Specialist

gobi2000

Vu+ User

gobi2000

Vu+ User

angelofsky1980

BlackHole Driver Specialist

gobi2000

Vu+ User