RT3070 driver v2.5.0.1

[angelofsky1980]

Here is a list of supported devices for the rt3070 driver.
Please report in this thread your experience!

Current driver version: 2.5.0.1

USB: 0411:00E8 MelCo., Inc. Buffalo WLI-UC-G300N Wireless LAN Adapter
USB: 0471:200F Philips (or NXP) 802.11n Wireless Adapter
USB: 04BB:0945 I-O Data Device, Inc. WN-GDN/US3 Wireless LAN Adapter
USB: 04BB:0947 I-O Data Device, Inc. WN-G150U Wireless LAN Adapter
USB: 04BB:0948 I-O Data Device, Inc. WN-G300U Wireless LAN Adapter
USB: 04E8:2018 Samsung Electronics Co., Ltd WIS09ABGN LinkStick Wireless LAN Adapter
USB: 050D:8053 Belkin Components F5D8053 N Wireless USB Adapter v1000/v4000 [Ralink RT2870]
USB: 050D:805C Belkin Components F5D8053 N Wireless Adapter v3000 [Ralink RT2870]
USB: 050D:815C Belkin Components F5D8053 N Wireless USB Adapter v3000 [Ralink RT2870]
USB: 050D:825B Belkin Components F5D8055 N+ Wireless Adapter v2000 [Ralink RT3070]
USB: 050D:935B Belkin Components F6D4050 N150 Enhanced Wireless Network Adapter v2000 [Ralink RT3070]
USB: 0586:3416 ZyXEL Communications Corp. NWD-210N 802.11b/g/n-draft wireless adapter
USB: 0789:0162 Logitec Corp. LAN-WN22/U2 Wireless LAN Adapter
USB: 0789:0163 Logitec Corp. LAN-WN12/U2 Wireless LAN Adapter
USB: 0789:0164 Logitec Corp. LAN-W150/U2M Wireless LAN Adapter
USB: 0789:0166 Logitec Corp. LAN-W300N/U2 Wireless LAN Adapter
USB: 07AA:002F Corega K.K. CG-WLUSB2GNL
USB: 07AA:003C Corega K.K. CG-WLUSB2GNL
USB: 07AA:003F Corega K.K. CG-WLUSB300AGN
USB: 07B8:2770 AboCom Systems Inc 802.11n/b/g Mini Wireless LAN USB2.0 Adapter
USB: 07B8:2870 AboCom Systems Inc 802.11n/b/g Wireless LAN USB2.0 Adapter
USB: 07B8:3070 AboCom Systems Inc 802.11n/b/g Mini Wireless LAN USB2.0 Adapter
USB: 07B8:3071 AboCom Systems Inc 802.11n/b/g Mini Wireless LAN USB2.0 Adapter
USB: 07B8:3072 AboCom Systems Inc 802.11n/b/g Mini Wireless LAN USB2.0 Adapter
USB: 07D1:3C09 D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870]
USB: 07D1:3C0A D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT2870] [OK]
USB: 07D1:3C0D D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
USB: 07D1:3C0E D-Link System WUA-2340 USB Adapter(rev.B)
USB: 07D1:3C0F D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.E) [Ralink RT2870] [OK]
USB: 07D1:3C11 D-Link System DWA-160 Xtreme N Dual Band USB Adapter(rev.B) [Ralink RT2870]
USB: 07D1:3C16 D-Link System DWA-125 Wireless N 150 Adapter(rev.A2) [Ralink RT2870]
USB: 07D1:3C17 D-Link System (Device name unknown)
USB: 07FA:7712 DrayTek Corp. (Device name unknown)
USB: 083A:6618 Accton Technology Corp. 802.11n Wireless Adapter
USB: 083A:7511 Accton Technology Corp. Arcadyan 802.11N Wireless Adapter
USB: 083A:7512 Accton Technology Corp. Arcadyan 802.11N Wireless Adapter
USB: 083A:7522 Accton Technology Corp. Arcadyan 802.11N Wireless Adapter
USB: 083A:8522 Accton Technology Corp. Arcadyan 802.11N Wireless Adapter
USB: 083A:A618 Accton Technology Corp. SMCWUSBS-N EZ Connect N Draft 11n Wireless Adapter [Ralink RT2870]
USB: 083A:A701 Accton Technology Corp. SMCWUSBS-N3 EZ Connect N Wireless Adapter [Ralink RT3070]
USB: 083A:A702 Accton Technology Corp. (Device name unknown)
USB: 083A:A703 Accton Technology Corp. (Device name unknown)
USB: 083A:B522 Accton Technology Corp. SMCWUSBS-N2 EZ Connect N Wireless Adapter [Ralink RT2870]
USB: 0B05:1731 ASUSTek Computer, Inc. 802.11n Network Adapter
USB: 0B05:1732 ASUSTek Computer, Inc. 802.11n Network Adapter
USB: 0B05:1742 ASUSTek Computer, Inc. 802.11n Network Adapter
USB: 1761:0b05 ASUS USB-N11 [OK]
USB: 0B05:1784 ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter [Ralink RT2870]
USB: 0CDE:0022 Z-Com 802.11b/g/n Wireless Network Adapter
USB: 0CDE:0025 Z-Com 802.11b/g/n USB Wireless Network Adapter
USB: 0DB0:3820 Micro Star International (Device name unknown)
USB: 0DB0:3821 Micro Star International (Device name unknown)
USB: 0DB0:3822 Micro Star International (Device name unknown)
USB: 0DB0:3870 Micro Star International (Device name unknown)
USB: 0DB0:3871 Micro Star International (Device name unknown)
USB: 0DB0:6899 Micro Star International 802.11bgn 1T1R Mini Card Wireless Adapter
USB: 0DB0:821A Micro Star International (Device name unknown)
USB: 0DB0:822A Micro Star International (Device name unknown)
USB: 0DB0:822B Micro Star International (Device name unknown)
USB: 0DB0:822C Micro Star International (Device name unknown)
USB: 0DB0:870A Micro Star International (Device name unknown)
USB: 0DB0:871A Micro Star International (Device name unknown)
USB: 0DB0:871B Micro Star International (Device name unknown)
USB: 0DB0:871C Micro Star International (Device name unknown)
USB: 0DB0:899A Micro Star International (Device name unknown)
USB: 0DF6:0017 Sitecom Europe B.V. WL-182 Wireless-N Network USB Card
USB: 0DF6:002B Sitecom Europe B.V. WL-188 Wireless Network 300N USB Adapter
USB: 0DF6:002C Sitecom Europe B.V. WL-301 Wireless Network 300N USB Adapter
USB: 0DF6:002D Sitecom Europe B.V. WL-302 Wireless Network 300N USB dongle
USB: 0DF6:0039 Sitecom Europe B.V. WL-315 Wireless-N USB Adapter
USB: 0DF6:003E Sitecom Europe B.V. WL-343 Wireless USB Adapter 150N X1
USB: 0DF6:003F Sitecom Europe B.V. WL-608 Wireless USB Adapter 54g
USB: 0DF6:0042 Sitecom Europe B.V. WL-345 Wireless USB adapter 300N X3
USB: 0DF6:0047 Sitecom Europe B.V. WL-352v1 Wireless USB Adapter 300N 002
USB: 0DF6:0048 Sitecom Europe B.V. WL-349v1 Wireless USB Adapter 150N 002
USB: 0E66:0001 Hawking Technologies HWUN1 Hi-Gain Wireless-300N Adapter w/ Upgradable Antenna [Ralink RT2870]
USB: 0E66:0003 Hawking Technologies HWDN1 Hi-Gain Wireless-300N Dish Adapter [Ralink RT2870]
USB: 100D:9031 Netopia, Inc. Motorola 802.11n Dualband USB Wireless Adapter
USB: 1044:800B Chu Yuen Enterprise Co., Ltd GN-WB30N 802.11n WLAN Card
USB: 1044:800D Chu Yuen Enterprise Co., Ltd GN-WB32L 802.11n USB WLAN Card
USB: 129B:1828 CyberTAN Technology Gigaset USB Adapter 300
USB: 13D3:3247 IMC Networks 802.11 n/g/b Wireless LAN Adapter
USB: 13D3:3273 IMC Networks 802.11 n/g/b Wireless LAN USB Mini-Card
USB: 13D3:3305 IMC Networks (Device name unknown)
USB: 13D3:3307 IMC Networks (Device name unknown)
USB: 13D3:3321 IMC Networks (Device name unknown)
USB: 1482:3C09 (Vendor name unknown) (Device name unknown)
USB: 148F:2070 Ralink Technology, Corp. RT2070 Wireless Adapter
USB: 148F:2770 Ralink Technology, Corp. RT2770 Wireless Adapter
USB: 148F:2870 Ralink Technology, Corp. RT2870 Wireless Adapter
USB: 148F:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter [OK]
USB: 148F:3071 Ralink Technology, Corp. RT3071 Wireless Adapter
USB: 148F:3072 Ralink Technology, Corp. RT3072 Wireless Adapter
USB: 14B2:3C06 Ralink Technology, Corp. 802.11n adapter (V1)
USB: 14B2:3C07 Ralink Technology, Corp. 802.11n adapter
USB: 14B2:3C09 Ralink Technology, Corp. 802.11n adapter
USB: 14B2:3C12 Ralink Technology, Corp. (Device name unknown)
USB: 14B2:3C23 Ralink Technology, Corp. 802.11n adapter
USB: 14B2:3C25 Ralink Technology, Corp. 802.11n adapter
USB: 14B2:3C27 Ralink Technology, Corp. rt2870 802.11n WLAN
USB: 14B2:3C28 Ralink Technology, Corp. 802.11n adapter (V2)
USB: 157E:300E TRENDnet (Device name unknown)
USB: 15A9:0006 Gemtek Wireless 11n USB Adapter
USB: 15C5:0008 Advance Multimedia Internet Technology Inc. (AMIT) WL532U 802.11g Adapter
USB: 1690:0740 Askey Computer Corp. [hex] 802.11n Wireless LAN Card
USB: 1737:0070 Linksys WUSB100 v1 RangePlus Wireless Network Adapter [Ralink RT2870]
USB: 1737:0071 Linksys WUSB600N v1 Dual-Band Wireless-N Network Adapter [Ralink RT2870]
USB: 1737:0077 Linksys WUSB54GC v3 802.11g Adapter [Ralink RT2070L]
USB: 1740:9701 Senao EnGenius 802.11n Wireless USB Adapter
USB: 1740:9702 Senao EnGenius 802.11n Wireless USB Adapter
USB: 1740:9703 Senao EnGenius 802.11n Wireless USB Adapter
USB: 1740:9705 Senao EnGenius 802.11n Wireless USB Adapter
USB: 1740:9706 Senao EUB9706 802.11n Wireless Adapter [Ralink RT3072]
USB: 1740:9707 Senao (Device name unknown)
USB: 1740:9708 Senao (Device name unknown)
USB: 1740:9709 Senao (Device name unknown)
USB: 177F:0302 Sweex (Device name unknown)
USB: 18C5:0012 AMIT Technology, Inc. CG-WLUSB10 Corega Wireless USB Adapter
USB: 1A32:0304 Quanta Microsystems, Inc. 802.11n Wireless LAN Card
USB: 1D4D:000C PEGATRON CORPORATION Ralink RT3070 802.11b/g/n Wireless Lan USB Device
USB: 1D4D:000E PEGATRON CORPORATION Ralink RT3070 802.11b/g/n Wireless Lan USB Device
USB: 1EDA:2310 AirTies Wireless Networks 802.11n USB Wireless LAN Card
USB: 2001:3C09 D-Link Corp. (Device name unknown)
USB: 2001:3C0A D-Link Corp. (Device name unknown)
USB: 2019:AB25 PLANEX GW-USMini2N 802.11n Wireless Adapter [Ralink RT2870]
USB: 2019:ED06 PLANEX 802.11n Wireless LAN Adapter
USB: 2019:ED14 PLANEX GW-USMicroN
USB: 203D:1480 (Vendor name unknown) (Device name unknown)
USB: 203D:14A9 (Vendor name unknown) (Device name unknown)
USB: 20B8:8888 (Vendor name unknown) (Device name unknown)
USB: 5A57:0280 Zinwell 802.11a/b/g/n USB Wireless LAN Card
USB: 5A57:0282 Zinwell 802.11b/g/n USB Wireless LAN Card
USB: 5A57:0283 Zinwell 802.11b/g/n USB Wireless LAN Card
USB: 5A57:5257 Zinwell Metronic 495257 wifi 802.11ng
USB: 7392:7711 Edimax Technology Co., Ltd EW-7711UTn nLite Wireless Adapter [Ralink RT2870]
USB: 7392:7717 Edimax Technology Co., Ltd EW-7717UN 802.11n Wireless Adapter [Ralink RT2870]
USB: 7392:7718 Edimax Technology Co., Ltd EW-7718UN 802.11n Wireless Adapter [Ralink RT2870]
USB: 148F:3070 CCA technology Wireless LAN Network Adapter 802.11N 150Mbps with Detachable Antenna (RT3070 Chipset) [OK]

 

[bigroma]

Hi
Are you sure for compatibility this driver with device on rt2870 chip?
It's strange for me. I compile different drivers for rt2870 & rt3070 for 2.6.18-7.4 kernel.
I know both drivers use dirver name rt2870 but ralink release different driver fot this chips.
I have good report on russian forum for work DWA-160 in 5GHz mode with rt2870 driver version 2..4.0.1 on VU+Duo.
But for setting up rt2870 with driver 2.4.0.1 from GUI needs patch not only for WirelessLan plugin. My patch rev 0.2 patching NetworkSetup.py too.
I have asus dongle on rt2870 but I can try compatibility with driver 3070 only in week(now I'm on vacation)


Sorry for my bad English

 

[angelofsky1980]

Hi
Are you sure for compatibility this driver with device on rt2870 chip?
It's strange for me. I compile different drivers for rt2870 & rt3070 for 2.6.18-7.4 kernel.
I know both drivers use dirver name rt2870 but ralink release different driver fot this chips.
I have good report on russian forum for work DWA-160 in 5GHz mode with rt2870 driver version 2..4.0.1 on VU+Duo.
But for setting up rt2870 with driver 2.4.0.1 from GUI needs patch not only for WirelessLan plugin. My patch rev 0.2 patching NetworkSetup.py too.
I have asus dongle on rt2870 but I can try compatibility with driver 3070 only in week(now I'm on vacation)


Sorry for my bad English

My adapter (DWA-140) works with this driver and is listed as RT2870 chipset.
The list is not exaustive and is taken around the web.
I've been seen your patch against NetworkSetup.py but I've not tested it at this time and I hope to make some tests in this weekend.

There are some busy days at work for me.

Good vacations

 

[heljik]

ok. Downloaded 1.4.4 to usb, plugged in and I now have black hole experimental 2011-01-14. I assume thats latest version with support for RT3070. On amazon.com I bought me a usb adapter with RT3070 : http://www.amazon.com/technology-Wi...5AYC/ref=sr_1_5?ie=UTF8&qid=1297330846&sr=8-5

This is plugged in. Now what do I do further?

 

[heljik]

Silly me, sorry for filling up this thread with mistakes. I will now install latest image correctly. Then I will try to connect to my wireless router netgear 3700. Anyone care to list on correct order the menus I shall open and what to fill in/leave blank/choose yes/no?

 

[angelofsky1980]

ok. Downloaded 1.4.4 to usb, plugged in and I now have black hole experimental 2011-01-14. I assume thats latest version with support for RT3070. On amazon.com I bought me a usb adapter with RT3070 : http://www.amazon.com/technology-Wi...5AYC/ref=sr_1_5?ie=UTF8&qid=1297330846&sr=8-5

This is plugged in. Now what do I do further?

The assurance of good working should be verified only with the device connected to the box but if the device use the chipset RT3070 should work now with VuPlus boxes.
I have a DWA140 (Dlink) and works very good and is a 150Mbit N-class device.

Silly me, sorry for filling up this thread with mistakes. I will now install latest image correctly. Then I will try to connect to my wireless router netgear 3700. Anyone care to list on correct order the menus I shall open and what to fill in/leave blank/choose yes/no?

The correct steps are:
- shutdown the box
- connect the wifi dongle
- power on the box
- go to Menu->Settings->System->Network
- if "Wireless lan connection" appear you can configure it according to your wifi home network (IP, DNS, security and passphrase).

 

[heljik]

did it I can confirm that the el cheapo usb adapter from amazon, works. HD videos from youtube st0ps after a few minutes, but I doubt it has anything with the adapter. Now I need to find the best EPGs.

 

[angelofsky1980]

did it I can confirm that the el cheapo usb adapter from amazon, works. HD videos from youtube st0ps after a few minutes, but I doubt it has anything with the adapter. Now I need to find the best EPGs.

Could you please post the output of the following command?

cat /proc/bus/usb/devices

I need the USB device ids of your WiFi devices

 

[heljik]

Could you please post the output of the following command?

cat /proc/bus/usb/devices

I need the USB device ids of your WiFi devices

sure. How do I launch the command? Have not found any C:> yet...

 

[angelofsky1980]

sure. How do I launch the command? Have not found any C:> yet...

The commando exposed above in my post should be launched into a telnet session on the box:

- connect via telnet at your box (using telnet utility, putty or other tool to make telnet sessions)
- launch the commando
- report here the output

 

[heljik]

After several hours searching the menus in the box, including new image 1.4.5 etc etc. How do I launch a command like that ? This I have found: BLUE-BLUE-telnet panel-OK = running.

 

[angelofsky1980]

After several hours searching the menus in the box, including new image 1.4.5 etc etc. How do I launch a command like that ? This I have found: BLUE-BLUE-telnet panel-OK = running.

You must use a PC to connect to your box via telnet. Via menu you cannot issue the command I've reported.

 

[heljik]

Using putty, choosing telnet connecting to 192.168.1.2 port 22 I get a prompt asking for password :-(

at least I'm trying, and I'm looking at BM750 login:

 

[angelofsky1980]

Using putty, choosing telnet connecting to 192.168.1.2 port 22 I get a prompt asking for password :-(

at least I'm trying, and I'm looking at BM750 login:

The telnet port is 23.
Username = root
Password = (blank = no password, press ENTER/Return) or type your password if you change it

 

[heljik]

bm750 login: root
root@bm750:~# cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@bm750:~#
like this?

 

[angelofsky1980]

bm750 login: root
root@bm750:~# cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@bm750:~#
like this?

Yes!
I need this output

Thank you very much!

 

[tango110]

OpenEmbedded Linux bm750

Vuplus 2.0.4 + BlackHole 1.4.5 bm750
bm750 login: root
root@bm750:~# cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=07d1 ProdID=3c09 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
root@bm750:~#
This adapter i use is dlink dwa-140 rev b but it does not appear in my network hope this gives you some clues

 

[bigroma]

Try this driver and may be patch

I have success report about using this driver & patch on previous version.

I recomend uninstall rt3070 before install rt2870

Unfortunately I don't have VU+ and can't test patch on 1.4.5. When I sight BH modify WirelessLan plugin, but I don't know about modifying NetworkSetup.py

I think you can don't install patch, but if you install driver only you must execute
ifconfig wlan0 up
before run networkwizard from menu.


Sorry for my bad English

 

[angelofsky1980]

Try this driver and may be patch

I have success report about using this driver & patch on previous version.

I recomend uninstall rt3070 before install rt2870

Unfortunately I don't have VU+ and can't test patch on 1.4.5. When I sight BH modify WirelessLan plugin, but I don't know about modifying NetworkSetup.py

I think you can don't install patch, but if you install driver only you must execute
ifconfig wlan0 up
before run networkwizard from menu.


Sorry for my bad English

At the moment your patch to NetworkSetup.py is not included into BH 1.4.5 but will be inserted in the next image as a new RT3070 driver who cover more chipsets and devices.

 

[bigroma]

NetworkSetup.py patch need only for new driver rt2870 and rt3572. May be for new version rt3070 too but I didn't get stable work from new version.

Driver rt3070 2.1.1.0 works great without this patch.

I'll try rt2870 dongle with rt3070 2.1.1.0 driver this weekend.
But I'm not sure for this solution work.
I read rt3070 dongles work with rt2870 driver but only with addition firmware file.


Sorry for my bad English