sat positioner crashes

J

jrbmw

Vu+ User
Hi , having problems with the sat positioner. Altered my dish and when I tried to retune in the sats the box kept crashing.changed images to tune the sats and ok, so no problems with my dish setup. Have vu + duo and running 1.7.2

regards jrbmw
 
a911

a911

The BH Lover
jrbmw said:
Hi , having problems with the sat positioner. Altered my dish and when I tried to retune in the sats the box kept crashing.changed images to tune the sats and ok, so no problems with my dish setup. Have vu + duo and running 1.7.2

regards jrbmw
Click to expand...

Lets see the crash.log,,,!
 
a911

a911

The BH Lover
Use "upload a file" with your post!
And
Are U using a different skin? Other than the ones @ server image!
If the STB crashes with BH 1.7.1 and now with 1.7.2 ,,from the positioner!
Then U are using somthing incompatible with the BH image,:lamo: ,,May be its with the backup settings, U'r reloading to the BH images!
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
jrbmw said:
how do I upload that?. this problem with the positioner was also present on the 1.7.1 image ....It doesent work
Click to expand...
Upload is allowed with "upload a file" button.
I use an USALS rotor with success


Sent from my iPhone using Tapatalk
 
J

jrbmw

Vu+ User
a911 said:
Use "upload a file" with your post!
And
Are U using a different skin? Other than the ones @ server image!
If the STB crashes with BH 1.7.1 and now with 1.7.2 ,,from the positioner!
Then U are using somthing incompatible with the BH image,:lamo: ,,May be its with the backup settings, U'r reloading to the BH images!
Click to expand...
 
J

jrbmw

Vu+ User
been using bh images since day one and no problems until 1.7.1 ,used a clean image with nothing installed and the positioner crashes. Use the bh curve skin and a v box for positioner
 
J

jrbmw

Vu+ User
jrbmw said:
have the file in my downloads but when I try to upload it is not there
Click to expand...
<?xml version="1.0" encoding="utf-8"?>
<opendreambox>
<enigma2>
<crashdate>Wed Mar 21 19:03:20 2012</crashdate>
<compiledate>Feb 4 2012</compiledate>
<contactemail>crashlog</contactemail>
DEMUX_STOP - ttx - ok
[eDVBCAService] remove channel 0x720fced0
[eDVBLocalTimerHandler] remove channel 0x720fced0
[eEPGCache] remove channel 0x720fced0
tuning to transponder with data (10847, 23000, 1, 6, 2, 282, 1, 1, 3, 2)
(0)tune
RotorCmd ffffffff, lastRotorCmd 1c
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/PositionerSetup/plugin.py", line 358, in updateStatus
transponderdata = ConvertToHumanReadable(self.tuner.getTransponderData(), "DVB-S")
File "/usr/lib/enigma2/python/Tools/Transponder.py", line 44, in ConvertToHumanReadable
eDVBFrontendParametersSatellite.RollOff_alpha_0_20 : "0.20"}[tp["rolloff"]]
KeyError: 3
(PyObject_CallObject(<bound method PositionerSetup.updateStatus of <class 'Plugins.SystemPlugins.PositionerSetup.plugin.PositionerSetup'>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
]]>
</enigma2crashlog>
I have edit your LOG, MX
 
Matrix10

Matrix10

Administrator
Have you had this problem when you have install a clean image
without skin changes and no other changes?

So install a clean image and test no BACKUP.

A similar problem I've already seen on some other forums.

So clean image and the default skin and test ??
 
a911

a911

The BH Lover
jrbmw said:
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
Click to expand...

It may be coming from the settings!
Do as MX recommend and do a new settings!
 
J

jrbmw

Vu+ User
a911 said:
It may be coming from the settings!
Do as MX recommend and do a new settings!
Click to expand...
I have used a clean image of 1.7.1 and 1.7.2 both with the default skin and still crashes.To get all of my sat positions back I had to load a different image when the sat positioner worked with no crashes, then reload the bh image and restore the settings.
 
a911

a911

The BH Lover
jrbmw said:
I have used a clean image of 1.7.1 and 1.7.2 both with the default skin and still crashes.To get all of my sat positions back I had to load a different image when the sat positioner worked with no crashes, then reload the bh image and restore the settings.
Click to expand...

Restoring other images settings to BH image may not work!
So do new setting,,,,,Its a tiring and long process,,but may be worth it!
GDLuck!

RgdZ
a911
 
J

jrbmw

Vu+ User
a911 said:
Restoring other images settings to BH image may not work!
So do new setting,,,,,Its a tiring and long process,,but may be worth it!
GDLuck!

RgdZ
a911
Click to expand...
Thats what I cant do as the positioner doesent work, I only use the sat /positions from the other image all else is bh
 
You must log in or register to reply here.
Top