Vu + Duo don't boot anymore

[deuxcase0]

Hi all,

I have a big problem with my Vu + Duo, after a reboot with the switch in the back, it don't boot, nothing appears on the display of Vu+, only a LED, on the top left, lights up.

I unplugged everything and have I left only the alimentation but the problem persists?

If anyone has a solution, let me know and thanks in advance!

@ + + +

--------------------------------------------------------------------------------------

Salut à tous,

Gros problème avec mon Vu+ Duo, après un reboot par l'interrupteur arrière, il ne boot plus, rien ne s'affiche sur l'afficheur, il n'y a que le voyant en haut gauche qui s'allume.

J’ai tout débranché et n’ai laissé que l’alim mais le problème persiste ?

Si quelqu'un a la solution, je suis preneur et le remercie par avance!

@+++

 

[a911]

Hi all,

I have a big problem with my Vu + Duo, after a reboot with the switch in the back, it don't boot, nothing appears on the display of Vu+, only a LED, on the top left, lights up.

I unplugged everything and have I left only the alimentation but the problem persists?

If anyone has a solution, let me know and thanks in advance!
quote]

What Ver. of BH Image you had on,,,and what color is the LED showing!
And try wait for minimum 30 mnts ,before you boot it up!

 

[deuxcase0]

hello,

Thank you for the answer!

The version of the image is BlackHole 1.7.3

The LED is red.

I did a test after several hours.

@ + + +

 

[a911]

To make the story short!
Red led is Bad!
---------------------------------------------------
However,
Try to re flash with new clean image!
If does not work,
then :-
Take it to the shop or seller for maintenance!
Hopefully its still under warranty!

GdLucK

 

[deuxcase0]

hello,

I have try to flash my VuUtil, the port of the PC is open but when I start the Vu + with the switch on the back, nothing happens (no serial connection) I just have the red LED, on the Vu + display.

That don't smell good!

@ + + +

 

[angelofsky1980]

hello,

I have try to flash my VuUtil, the port of the PC is open but when I start the Vu + with the switch on the back, nothing happens (no serial connection) I just have the red LED, on the Vu + display.

That don't smell good!

@ + + +

As reported by other users, you must contact your reseller and verify if they can repair your box. I don't know the reason for this kind of problem.

 

[deuxcase0]

Hi all,

I ordered the module CY7C68013A Cypress EZ-USB FX2LP USB2.0 and will try to inject per jtag, and you informe.

@ + + +

 

[angelofsky1980]

Hi all,

I ordered the module CY7C68013A Cypress EZ-USB FX2LP USB2.0 and will try to inject per jtag, and you informe.

@ + + +

It's the same thing I would like to do in the next weeks.

 

[deuxcase0]

It's the same thing I would like to do in the next weeks.

Hi,

You can find the module here:

http://www.ebay.co.uk/itm/110846255238

@+++

 

[elec]

As reported by other users, you must contact your reseller and verify if they can repair your box. I don't know the reason for this kind of problem.

The reseller I contacted told me not to bother to use the remote controller to shutdown my box. - Just use the the rear switch to shut down your box, he said!! I just love those kind of smart solutions!
Can there be a HW problem in the Power Supply or is it Kernel related?

 

[angelofsky1980]

The reseller I contacted told me not to bother to use the remote controller to shutdown my box. - Just use the the rear switch to shut down your box, he said!! I just love those kind of smart solutions!
Can there be a HW problem in the Power Supply or is it Kernel related?

I use always the RC to shutdown my boxes and all works regularly.
The reseller response is very strange....

 

[fumbduck]

Found this posted on another forum for those that can't fix their 'red led only problem'
just replace C807 220uF 16v with a new one or with 330uF 16v on the motherboard
Haven't tried this myself yet but will tomorrow.

 

[deuxcase0]

Found this posted on another forum for those that can't fix their 'red led only problem'
just replace C807 220uF 16v with a new one or with 330uF 16v on the motherboard
Haven't tried this myself yet but will tomorrow.

Hello,
Thank you for the answer, but I can not find C807 on the motherboard?
See you soon.
----------------------------------------------------------------------------------
Bonjour,
Merci pour la réponse, mais je ne trouves pas C807 sur la carte mère?
A bientôt.

 

[a911]

Hello,
Thank you for the answer, but I can not find C807 on the motherboard?
See you soon.
----------------------------------------------------------------------------------
Bonjour,
Merci pour la réponse, mais je ne trouves pas C807 sur la carte mère?
A bientôt.

Read this thread,,(all of it)
http://www.vuplus-community.net/board/threads/vu-duo-is-dead.3616/page-4#post-54785

 

[deuxcase0]

Read this thread,,(all of it)
http://www.vuplus-community.net/board/threads/vu-duo-is-dead.3616/page-4#post-54785

Hi all,

A big THANK YOU to those who have helped in this post!
Not Vu + Duo works, I replaced C807 with a 330 uF 25v
Everything is OK!

@ + + +
----------------------------------------------------------------------
Salut à tous,

Un grand MERCI aux personnes qui ont aidées dans ce post !!!
Non Vu+ Duo fonctionne, j'ai remplacé C807 par un 25v 330 µF
Tout est OK!

@+++