No, that¨'s not the problem. Cable is ok. I just switched my universal lnb with this dcss lnb and it started fluctuating because the setup is wrong for this lnb. Tha't what I want to correct. Using a universal lnb there is no fluctuation at all.
I can only help you in which direction you should look for info.
We have more information on the unicable / Jess configuration on this forum
but you can look on the WW net.
Unfortunately I have no experience with this because I have not used unicable / Jess.
(I don't have Duo 2 receiver at the moment only 4K receiver. I don't know if the configuration is the same)
We have on the forum those who know for sure.
First of all
It is not a universal LNB but a
Unicable dcss/ Jess LNB.
I believe it's this one ???
https://www.gestrikeantennservice.com/single-cable-lnb-med-24-band/
translated
https://translate.google.com/transl...tennservice.com/single-cable-lnb-med-24-band/
So it should be configured as Unicable / Jess
It is possible that there is a similar one in the list (Try to compare IF channel frequencies they are listed in the link) and if not i believe it should be configured as Unicable User defined.
So Configuration Mode advanced
LOF Unicable
Unicable Configuration Mode Unicable User defined
Diction mode Jess (EN50607)
On the link above I saw a list of channels / frequencies used by that Unicable (of course if it's that LNB)
i guess these are the frequencies you have to configure in advanced mode for SatCR channels each channel separately.
So look for more information if you don't already get it here
or experiment.
If I understood correctly
The LNB appears to have 24 frequencies and can cover 24 bands
and as many as three receivers / tuners ???